• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.582-584
• /
• 2019

In this paper, dispersion-managed optimal link configuration with the repetitive distribution of the pairs of residual dispersion per span, in which optical phase conjugator placed at midway, is proposed. It is confirmed that the proposed optical link configuration is better than the conventional dispersion-managed link for the performance improvement of wavelength division multiplexed channels.

• Journal of Advanced Navigation Technology
• /
• v.17 no.4
• /
• pp.413-420
• /
• 2013

The design rule depending on total transmission length is induced in the optical links with residual dispersion per span (RDPS) of the random distribution, which is adopted for implementing the flexible systems of wavelength division multiplexing (WDM) transmission with dispersion management (DM) and optical phase conjugation. DM parameters used for the analysis of the design rule are the effective net residual dispersion (NRD) and the effective launch power. It is confirmed that the flexible optical network configuration with the total transmission length lower than 1,000 km is possible, because the system performance difference between the randomly distribution and the uniform distribution of RDPS is small. And, in the optical links with the randomly distributed RDPS, the wide NRD can be applied for transmitting WDM channels of the relatively wide launch power.

• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.462-466
• /
• 2018

Optical phase conjugation combining with dispersion management (DM) is promising technique to compensate for signal distortion due to chromatic dispersion and nonlinear Kerr effects of single mode fiber (SMF) in optical communication systems. However the fixed SMF length in every fiber spans usually used in the optical links with optical phase conjugator(OPC) and DM restricts the flexible link configuration. The goal of this paper is to investigate the possibility of the flexible configurations of the ultra-high and long-haul optical transmission systems by using the random distribution of SMF length of each fiber spans consisted of the optical link. It is confirmed that the excellent compensation for the distorted wavelength division multiplexing signals in the optical links with the randomly distribution is obtained in case of the shorter averaged SMF length over all fiber spans. It is also confirmed that the control method of net residual dispersion suitable to good compensation is postcompensation and the extent of net residual dispersion(NRD) is -10 ps/nm in DM optical link consisted of fiber spans with the randomly distributed SMF lengths.

• Journal of Advanced Navigation Technology
• /
• v.18 no.2
• /
• pp.158-164
• /
• 2014

For transmitting the ultra-high speed optical signals with better performance, the techniques to suppress or mitigate the signal distortion due to group velocity dispersion and optical Kerr effects are required. Dispersion management (DM), optical phase conjugation, and the combination of these two are promising techniques to compensate for the signal distortion. However, the fixed length of single mode fiber (SMF) and the fixed residual dispersion per span (RDPS) usually used in these optical links restricts flexible link configuration. The goal of this paper is to investigate the possibility of the flexible configurations of the ultra-high and long-haul optical transmission systems by using the artificial and the random distribution of SMF length and RDPS of each fiber spans consisted of the optical link. It is confirmed that the proposed link configurations should be one of the methods suitable for implementing the flexible optical transmission systems, however which depend on other link parameters, such as the averaged RDPS, and the launch power.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.3
• /
• pp.135-140
• /
• 1999

To simulate the wave transformation by an energy dissipation region, a numerical model is suggested by discretizing the elliptic mild-slope equation. Generalized conjugate gradient method is used as solution algorithm to apply parabolic approximation to open boundary condition. To demonstrate the applicabil-ity of the numerical procedure suggested, the wave scattering by a circular damping region is examined. The feature of reflection in front of the damping region is captured clearly by the numerical solution. The effect of the size of dissipation coefficient is examined for a rectangular damping region. The recovery of wave height by diffraction occurs very slowly with distance behind the damping region.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7A
• /
• pp.719-726
• /
• 2004

In this paper, compensation characteristics of distorted WDM channel due to both chromatic dispersion and self phase modulation (SPM) is numerically investigated under the assumptions of non-uniformly distributed fiber dispersion, in order to inspect the application of mid-span spectral inversion (MSSI) to any exact transmission links. The MSSI is compensation method used in this approach. This method has an optical phase conjugator (OPC) placed in mid-way of total transmission length to compensate distorted WDM channels. It is confirmed that MSSI will become applicable to long-haul WDM systems by controlling input light power of transmission channels, when the averaged dispersion of both fiber sections with respect OPC was varied and distributed unequally each other. Applying MSSI to long-haul WDM system, it is possible to remove all in-line compensator, consequently it will be expected to reducing system cost.

• Journal of Advanced Navigation Technology
• /
• v.16 no.3
• /
• pp.440-448
• /
• 2012

Optimal net residual dispersion (NRD) and effective launching power range of optical transmission links with optical phase conjugator (OPC) and dispersion management (DM) for compensating the distorted wavelength division multiplexing (WDM) signals due to interaction of group velocity dispersion (GVD) and optical nonlinear effects. WDM systems considered in this research have optical links with the random distribution of residual dispersion per span (RDPS) in each single mode fiber (SMF) spans of only one half transmission section for designing the adaptive optical transmission system configurations. It is confirmed that optimal NRD is 10 ps/nm and effective launching power range is obtained to be -8~1 dBm under NRD = 10 ps/nm in optical links with total dispersion controlled by precompensation. And, it is also confirmed that optimal NRD is -10 ps/nm and effective launching power range is obtained to be -7.5~1 dBm under NRD = -10 ps/nm in optical links with total dispersion controlled by postcompensation.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.4
• /
• pp.485-505
• /
• 2022

On November 15, 2017, a Mw 5.4 Pohang Earthquake occurred at about 4 km hypocenter in the Heunghae area, and caused great damage to Pohang city, Korea. In the Heunghae area, which is the central part of the Pohang Basin, the Cretaceous Gyeongsang Supergroup and the Late Cretaceous to Early Paleogene Bulguksa igneous rocks as basement rocks and the Neogene Yeonil Group as the fillings of the Pohang Basin, are distributed. In this paper, structural and geological researches on the crustal deformations (folds, faults, joints) in the Pohang Basin and the coseismic ground deformations (sand volcanoes, ground cracks, pup-up structures) of Pohang Earthquake were carried out, and the deformation history of the Pohang Basin and characteristics of the coseismic ground deformations were considered. The crustal deformations were formed through at least five deformation stages before the Quaternary faulting: forming stages of the normal-slip (Gokgang fault) faults which strike (N)NE and dip at high angles, and the high-angle joints of E-W trend regionally recognized in Yeonil Group and the faults (sub)parallel to them, and the conjugate normal-slip faults (Heunghae fault and Hyeongsan fault) which strike E-W and dip at middle or low angles and the accompanying E-W folds, and the conjugate strike-slip faults dipped at high angles in which the (N)NW and E-W (NE) striking fault sets show the (reverse) sinistral and dextral strike-slips, respectively, and the conjugate reverse-slip faults in which the NNE and NNW striking fault sets dip at middle angles and the accompanying N-S folds. Sand volcanoes often exhibit linear arrangements (sub)parallel to ground cracks in the coseismic ground deformations. The N-S or (N)NE trending pop-up structures and ground cracks and E-W or (W)NW trending ground were formed by the reverse-slip movement of the earthquake source fault and the accompanying buckling folding of its hanging wall due to the maximum horizontal stress of the Pohang Earthquake source. These structural activities occurred extensively in the Heunghae area, which is at the hanging wall of the earthquake source fault, and caused enormous property damages here.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1639-1644
• /
• 2014

SAR satellite can acquire clear imagery regardless of weather and the images are widely used for land management, natural hazard monitoring and many other applications. Automatic image matching technique is necessary for management of a huge amount of SAR data. Nevertheless, it is difficult to assure the accuracy of image matching due to the difference of image-capturing attitude and time. In this paper, we compared performances of MI method, FMT method and SIFT method by applying arbitrary displacement and rotation to TerraSAR-X images and changing resolution of the images. As a result, when the features having specific intensity were distributed well in SAR imagery, MI method could assure 0~2 pixels accuracy even if the images were captured in different geometry. But the accuracy of FMT method was significantly poor for the images having different spatial resolutions and the error was represented by tens or hundreds pixels. Moreover, the ratio of corresponding matching points for SIFT method was only 0~17% and it was difficult for SIFT method to apply to SAR images captured in different geometry.

• Economic and Environmental Geology
• /
• v.44 no.4
• /
• pp.273-288
• /
• 2011

Chon-Ashuu copper mining claim area is located, in terms of the geotectonic setting, in the northern part of the suture line which is bounded with the marginal part of Issik-kul micro-continent on the southern part of North Tien-Shan terrane. The geological blocks of Chon-Ashuu districts belong to the southern tip of Kazakhstan orocline. The rock formation of this area are composed of the continental crust or/and arc collage and the paleo-continental fragments-accretionary wedge complex of pre-Altaid orogenic materials. ASI(Alumina Saturation Index) of Paleozoic plutonic rocks in Chon-Ashuu area belong to the peraluminous and metaluminous rocks which were generated from fractional crystallization of Island and volcanic arc crusts in syn-post collisional plate. The geology of the ChonAshuu area consists of upper Proterozoic and Paleozoic rock formations. According to Harker variation diagrams for Chon-Ashuu arenaceous sedimentary rocks, the silty sandstone of Chon-Ashuu area showing the mineralogical immaturity were derived from Island arc or the marginal environments of active continent in Cambro-Carboniferous period. Numerous intrusive rocks of Chon-Ashuu area are distributed along north east trending tectonic structures and are bounded on four sides by the conjugate pattern. The most common type of the plutonic rocks are granodiorite and monzodiorite. According to the molecular normative An-Ab-Or composition (Barker, 1979), the plutonic rocks in Chon-Ashuu area are classified into tonalite - trondhjemite - granodiorite (TTG) series which are an aggregation of rocks which is the country rock of copper mineralization, that are formed by melting of hydrous mafic crust at high pressure.