• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.327-333
• /
• 2003

Characteristics of vibration propagation of borehole blasting were analyzed with 578 borehole vibration data obtained from 23 sites which were used in tunnel and underground space design, and 221 tunnel vibration data fron 4 sites of tunnel under construction. Analysis results on the damping of vibration velocity show that site factors in borehole blasting were higher than those in tunnel blasting. And the critical charge calculated from regression equations at large scaled distance was lower in borehole blasting. Dominant frequency was in the range of 30∼60Hz for the borehole blasting and 60∼90Hz for the tunnel blasting. As a conclusion, the borehole blasting data should not be used on the tunnel blasting design without careful statistical analysis.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.82-85
• /
• 2008

A Helmholtz resonator is applied to control high frequency combustion instability in liquid rocket engine. Damping characteristics of the Helmholtz resonator are investigated by the flow characteristic and its design. To simulate combustion instability, resonance in a test section(with fixed volume) is made by a pressure pulsator, and then damping characteristics are investigated. Its orifice length and diameter are selected as the design parameters and flow rates are varied to reveal the effect on damping characteristics. The experimental results show that a Helmholtz resonator is also working with flows. When length and diameter of an orifice are small, the tuning frequency increases as the flow velocity increases.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.16-23
• /
• 2012

3-D linear acoustic analysis has been performed to elucidate damping characteristics of large Helmholtz acoustic cavities in FASTRAC combustor. Acoustic impedance concept has been introduced to quantify combustion stabilization capacity. For a given acoustic cavity, sonic velocity in cavity to achieve an optimal tuning has been determined and satisfactory agreement with the previous results has been obtained. Feasible estimation of sonic velocity in acoustic cavity has been devised. Results show similar trends without significant deviations, which can be used in the procedure of design and verification of acoustic cavity. From the satisfactory results, investigation of other combustors with acoustic cavities which have shown combustion instabilities will be done as future works.

• Annual Conference of KIPS
• /
• 2011.11a
• /
• pp.1422-1425
• /
• 2011

본 논문에서 소개하는 '행성' 게임은 소셜 네트워크 접속자들이 주어진 공간과 자원으로 상품을 생산하거나 가공하고 교환함으로써 더 많은 상품을 생산해내는 물물교류 개념을 기본으로 한다. 새로운 행성에 정착한 인간들의 수렵과 채집, 육성, 가공, 건축을 위한 각자의 역할에 따른 생산과 소비, 그리고 상호간의 거래를 위한 의사소통 행위를 통하여 게임적인 재미와 동시에 경영과 유통과 관련된 경제활동의 기본적인 개념을 습득할 수 있게 하였다. 현재까지의 프로토타이핑 과정과 앞으로의 연구과제를 제시하고자 한다.

• Annual Conference of KIPS
• /
• 2021.05a
• /
• pp.171-174
• /
• 2021

최근 사물인터넷(IoT) 환경에서 다양한 장비의 인터넷 통신이 가능하여 이에 적절한 경량 블록 암호 알고리즘에 대한 연구가 활발히 진행되고 있다. ICISC 2020에서 새로 발표된 국산 경량 블록 암호 알고리즘인 PIPO는 새로운 경량 S-Box를 조합한 unbalanced-Bridge 구조로 효율적인 비트슬라이싱 구현을 제공한다. IoT 환경에 PIPO가 적용되기 위해서는 부채널 분석에 대한 안전성이 보장되어야 한다. 따라서 본 논문에서는 PIPO가 1차 CPA 공격에 취약함을 확인한다. 그리고 부채널 공격에 대응하기 위해 1차 마스킹 기법을 제안한다. 제안한 마스킹 기법은 1차 CPA 공격에 안전하였으며, 마스킹 적용 전보다 -375%의 성능을 보였다. 그리고 기존 기법보다 1287% 속도가 빨라진 것을 확인하였다.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.2
• /
• pp.99-112
• /
• 2008

The purpose of this study was to analyze on changes of ready constructed record(RCR) in landscape construction industry for 10 years from 1997 to 2006. For the study, according to the classification system of Korea construction industry, landscape construction industry were classified into landscape constructor as a general constructor, landscape planting constructor and landscape facilities constructor as special constructors. The results are as follows: 1. The RCR in landscape construction industry have increased for 10 years higher than other construction industry. Concretely the RCR ratio of landscape constructor has increased 0.9% in 1997 to 1.9% in 2006, the RCR ratio of landscape planting constructor 1.3% to 2.5%, and the RCR ratio of landscape facilities constructor 0.5% to 1.5%. Futhermore this increasing trend has been strengthened during the last a few years. 2. Differently from landscape constructor, the subcontract ratio of landscape planting constructor and landscape facilities constructor were higher, especially landscape facilities constructor was highest amount for 71.1% in the subcontract ratio. 3. The RCR of landscape construction industry in the metropolitan area including Seoul, Kyunggi, was higher than other region's, and the ratio of RCR of landscape constructor in this area was 53.5%, landscape planting constructor's 58.2%, and landscape facilities constructor 75.0%. 4. The yearly RCR per company and the RCR by project of landscape constructor and landscape planting constructor were stagnant. However, landscape facilities constructor's RCR showed an upward trend as years go by. This study was focused on the RCR of landscape construction industry, further study on the factors to affect the RCR of landscape construction industry and the RCR by project types is required in the near future.

• Geophysics and Geophysical Exploration
• /
• v.2 no.2
• /
• pp.104-111
• /
• 1999

As a practical developing step of electromagnetic (EM) tomography technique, we quantitatively analyzed the effects of borehole fluid and casing on the borehole EM responses. The EM response turns out to have nothing to do with the property of the borehole fluid except in the close vicinity of the transmitter, which shows the wide perspective of the application of borehole EM. Single-hole responses in the presence of the steel casing throughly reflect those of the casing itself since its extremely high induction number or shallow skin depth. EM responses through steel casing do show the information of the host medium. In the near field region which corresponds to low frequency or the vicinity of the borehole, however, we can not separate the signal containing the information of the host from that of casing. Otherwise, the severe attenuation of energy in the casing at high frequencies renders the signal undetectable. The optimum frequency is, therefore, to be chosen to extract the information of the host considering both the property of the casing and the skin depth of the medium and the practical technique to determine the casing property through single-hole measurements is required.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.5
• /
• pp.605-612
• /
• 2012

A tension member that has a high-strength bolt fastened to a standard bolt hole increases structural resistance but causes problems from workability or economic perspectives. In this research, a total of 28 samples that have standard and over bolt holes as the tension member's high-strength bolted connection were made and a tension test was conducted. The change of strength of the connection has been confirmed by comparing the tension load of standard and over bolt hole samples obtained from the test results with the design strength due to net section and end distance. Samples made with over bolt holes had a lighter tension load than that of samples made with standard bolt holes, exceeded the design strength of present design standards, and although decrease in strength was inevitable due to the over bolt hole, their safety was satisfactory.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.841-845
• /
• 2007

낙차공(drop structure)은 치수목적의 하천정비를 위한 주요 수공구조물이다. 하지만 국내외적으로 환경을 고려한 하천공법이 요구되면서 고낙차로 인해 발생하는 수중생물의 단절은 기존 낙차공의 큰 문제로 대두되었다. 이에 기존 고낙차를 이용한 낙차공 보다는 완만한 경사를 가지는 낙차공을 설치함으로써 기존 낙차공에 의해 단절되었던 어류의 이동통로로서의 역할과 주변 경관개선을 위해 설치하고 있는 구조물이 필요하였다. 본 연구는 위와 같은 필요성에서 시작되었으며 완경사 낙차공을 경사형 낙차공이라 정의하고 조건에 따른 흐름특성을 수리실험을 통해 분석하였다. 연구내용은 경사형 낙차공의 경사조건과 하상재료의 입경에 따라 발생하는 에너지 소산에 따른 효율과 구조물 하류부 도수현상에 대한 것으로 이를 통해 경사형 낙차공 조건에 따른 흐름특성을 파악하였다. 수리실험은 폭 0.6m, 길이 20.0m 인 가변경사수로에서 수행하였으며, 하상재료는 크기에 따라 2가지 입경(16mm, 25mm)의 재료를 선정하였고, 구조물 경사에 대해 각각 1V:2H, 1V:3H, 1V:4H, 1V:6H의 경사도를 가지는 모형을 제작하여 실험을 수행하였다. 유량조건 및 도수발생위치는 유입부 수위에 따라 단계별로 4가지 수위조건을 만족시키는 유량을 통수하였고, 하류부 수위를 조절하여 도수위치를 조절하여 유입부(1), 낙차공부(5), 사류부(1), 하류부(1)에 대하여 총 8개 지점을 선정하여 수위$(y_n)$ 및 유속(V), 도수길이(Lr), 도수발생거리(Lj) 등을 측정하였다.

• Journal of Convergence for Information Technology
• /
• v.10 no.7
• /
• pp.147-152
• /
• 2020

The research is carried out to analyze the cost-effectiveness of blasting patterns with regard to the diameters and design of blasting holes. Blasting patterns for single diameter array, and mixed diameter array were comparatively analyzed with regard to drilling and charging time, and materials required. The number of blasting holes required for single array pattern and mixed array pattern were 138 and 93 holes, respectively. From the drilling time analysis, reduction in time and its efficiency of mixed pattern were 139 minutes and 25%, respectively, in comparison with single pattern. Charging time reduction and its efficiency of mixed blasting pattern were evaluated as 22.5 minutes per worker and 33%, respectively, compare to single blasting pattern. The explosive quantities of G1 and G2 required for single array patterns were 270 and 30, while those were 222 and 20 for mixed array patterns for tunnelling 4m. And single pattern required 45 more detonators than the mixed pattern. The evaluation of material required can also be positive parameter for cost reduction of tunnel construction.