• Journal of Cadastre & Land InformatiX
• /
• v.48 no.1
• /
• pp.71-91
• /
• 2018

In recent years, application of UAV(Unmanned Aerial Vehicle) to seed sowing and pest control has been actively carried out in the field of agriculture. In this study, UAS(Unmanned Aerial System) is constructed by combining image sensor of various wavelength band and SfM((Structure from Motion) based image analysis technique in UAV. Utilization of UAS based vegetation survey was investigated and the applicability of precision farming was examined. For this purposes, a UAS consisting of a combination of a VIS_RGB(Visible Red, Green, and Blue) image sensor, a modified BG_NIR(Blue Green_Near Infrared Red) image sensor, and a TIR(Thermal Infrared Red) sensor with a wide bandwidth of $7.5{\mu}m$ to $13.5{\mu}m$ was constructed for a low cost UAV. In addition, a total of ten vegetation indices were selected to investigate the chlorophyll, nitrogen and water contents of plants with visible, near infrared, and infrared wavelength's image sensors. The images of each wavelength band for the test area were analyzed and the correlation between the distribution of vegetation index and the vegetation index were compared with status of the previously surveyed vegetation and ground cover. The ability to perform vegetation state detection using images obtained by mounting multiple image sensors on low cost UAV was investigated. As the utility of UAS equipped with VIS_RGB, BG_NIR and TIR image sensors on the low cost UAV has proven to be more economical and efficient than previous vegetation survey methods that depend on satellites and aerial images, is expected to be used in areas such as precision agriculture, water and forest research.

• The Journal of Engineering Geology
• /
• v.26 no.3
• /
• pp.331-337
• /
• 2016

Radial collector wells (RCWs) have been managed by Korea Rural Community Corporation (KRC) since 1983, installing 98 wells for agriculture in rural area over the country. Among them, 20 wells were installed upstream of 5 subsurface dams and the remaining were installed regardless of the subsurface dam. Most of RCWs have been developed in 1980s and 1990s, and 83 wells have been passed more than 20 years after construction. The number of horizontal arms for RCWs varies from 9 to 28, with length and diameter being 10~30 m and 65 mm, respectively. The central caisson with an inner diameter of 3.5 m was commonly constructed to a depth of 10 m. The maximum pumping rates in RCWs, which are located at distances of 10 to 1,200 m from the river, are 2,000~10,000 m³/day. RCW has a fundamental problem that reduced pumping capacity and degraded well efficiency, due to the physical and chemical clogging. From the feasibility test for improving RCW performance, specific capacity increased to 67% after rehabilitation. TV logging for RCW horizontal arm shows that near the caisson is more severe clogging. From the results of this study, KRC has established the guidebook for monitoring and improving well efficiency through physical/chemical treatment, well logging, and hydraulic tests and managed RCWs periodically with its rehabilitation methods.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.3
• /
• pp.188-198
• /
• 2018

Purpose: Recently, according to the development of digital technology, computer aided design/computer aided manufacture (CAD/CAM) system is widely used for fabrication of various dental prostheses in the field of dentistry. This study aims to survey the present state and awareness of CAD/CAM system on domestic dental field, and to supply the advice for the application of the new system. Materials and methods: In this questionnaire survey was conducted for a total of 298 dentists, dental hygienist and dental technicians of the whole country including the dental hospital of Seoul National University for two months from November to December, 2016 through mail. Results: The most important purpose to consider when purchasing a dental CAD/CAM milling machine were the performance of the milling machine (64.43%) and the use of milling machine was the highest with 49.33% of manufacturing for dental prosthesis and customized implant abutment. In addition, more than 60% of respondents answered positively about the purchase of new milling machine if the CAD/CAM milling machine was improved to satisfactory performance. Conclusion: This survey results show that the improved CAD/CAM milling machine would be play an important role in the dental industry in preparation for digitization and the 4th industrial revolution.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.5
• /
• pp.29-41
• /
• 2017

Recently, citizen participation and user - oriented design are becoming increasingly important in the urban space design process. The Children's Park has also begun to discuss the need to reflect children's opinions and needs as well as existing ways and means of participation to reflect these opinions and ideas. In this study, a design education program for children was constructed and user opinions accessed via this design education were reflected in design and applied to the Children's Park. The training program consists of five weeks of educational programs, textbooks and teaching methods related to existing research, design education for children and participatory design programs. This program was used as a pilot of Eogong-6ho Children 's Park(No. 6 Children's Park), located in Gwonseon-gu, Suwon, and reinterpreted the results of the workshop for 5th grade students at Sunil Elementary School. This design education program is distinguished from other workshop programs on how to organize and operate participating professors and textbooks, and has a program base that can reproduce the entire process. In addition, it is necessary to verify the effects of user participation through research, such as monitoring the use of children's parks after completion, as well as the application of more diverse design methodologies to children's parks and the way they reflect children's opinions.

• Land and Housing Review
• /
• v.2 no.3
• /
• pp.249-258
• /
• 2011

In order to achieve an efficient urban regeneration of the nation, it is required to determine the extent of decline nation-wide and the declined areas for each district and also to evaluate the potentials of the concerned areas. For this task to be accomplished, a construction of a comprehensive diagnostic system based on spatial information considering diversity and complexity is required. In this study, a total information system architecture for urban regeneration is designed as part of the construction of such a diagnostic system. In order to develop the system, a city and district level unit decline diagnostic indicators has been constructed and a decline diagnostic system has been developed. Also, a scheme to promote the advancement of the system is proposed. The DB construction is based on the city and district level nation-wide and metadata for the concerned level is constructed as well. The system is based on the Open API and designed to be flexible for extension. Also, an RIA-based intuitive UI has been implemented. Main features of the system consist of the management of the indicators, diagnostic analysis (city and district level decline diagnosis), related information, etc. As for methods for the advancement, an information model in consideration of the spation relations of the urban regeneration DB has been designed and application methods of semantic webs. Also, for improvement methods for district unit analytical model, district level analysis models, GIS based spatial analysis platforms and linked utiliation of KOPSS analysis modules are suggested. A use of a total information system for urban regeneration is anticipated to facilitate concerned policy making through the identification of the status of city declines to identify and the understanding of the demands for regeneration.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.597-601
• /
• 2006

There are considerable amount of man power and time spent for analysis and selection of various materials due to the inadequate application system and rapid searching process of material related information in each stage of building production process. Also, due to the insufficiency in recycling system of important information created for each process, they are hoarded at each task stage and project completion. As a result, because of the repetition of the similar/identical tasks on each process, it is the major reason for impeding the efficient employment of manpower of the company and decreasing competition of the company. Moreover, in selecting finish material in the project field, there are many difficulties due to the lack of technical information such as product characteristics and field applications. The construction quality also affects the profit and loss of the product which calls for a need to develop continued information management system that the finish material related examples could be shared in real time. The objective of this study is to propose a building finish material information which the real time research and application is possible to raise the productivity. TO do this, the current material information task status analysis and questionnaire research should be conducted to understand the demand of system development and reflect the result onto the system for easy access and application. Therefore, the building finish material information system for enhancement of productivity of construction task proposed in this study is expected to be utilized in enhancement of construction quality, maximization of company profit, and strengthening of company competition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.384-391
• /
• 2020

An annual average of more than 100 casualties occur on construction sites designated by the occupational safety and health law despite the safety assessment regulations from Korea Occupational Safety & Health Agency. Even if those sites involve more harmful or hazardous work than other sites, the result creates doubt regarding the effectiveness of the safety assessment regulations. The safety of construction sites is difficult to maintain continuously and instantly because ofthe variability in the construction industry despite inspecting workers, equipment, and facilities by managers. Many discussions on how to utilize BIM have been made to improve the productivity of construction projects, and BIM-based modeling and simulation would bring many benefits to safety. This study examined the hindrance factors of field utilization of the safety assessment regulations through a research literature survey, disaster situation analysis and questionnaire, and suggests the necessity of the application of BIM that enhances the effectiveness of safety assessment regulations by identifying the relationship between the hindrance factors and the function of BIM.

• Land and Housing Review
• /
• v.5 no.4
• /
• pp.259-269
• /
• 2014

After global financial crisis, the ratio of household debt to GDP was decreasing in other advanced countries such as the U.S., and the U.K. and so on. But, in Korea, household debt (of which residential mortgage loan account for a large part) ratio is still increasing. This paper focuses on the scale and characteristics of households in negative housing equity (those are called House-poors in Korea), and also the socio-economic backgrounds of the formation process. In financial perspective, the problem of negative housing equity depends on financial debt repayment capability. We used DSR (Debt Service Ratio) and LTA (Loan to Asset ratio) as financial indicators to evaluate the debt repayment capability. The critical value of DSR is assumed as 40%, and LTA 100%. The socio-economic backgrounds of the House-poors are as follows : increasing households debt dependency, over lending competition of financial institutions and unreasonable loan in household economy, instability of real estate market, week regulation on mortgage loan. Finally, this paper suggests some implications about the range and the target of public intervention.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.2
• /
• pp.93-107
• /
• 2019

The open data portal collects data created by public institutions and opens and shares them according to related laws. With the activation of the Fourth Industrial Revolution, all sectors of our society are demanding high quality data, but the data required by the industry has not been greatly utilized due to the lack of quantity and quality. Numerous data collected in the real world can be implemented in cyber physical systems to simulate real-world problems, and alternatives to various social issues can be found. There is a limit to being provided. Location intelligence is a technology that enables existing data to be represented in space, enabling new value creation through convergence. In this study, to present location intelligence of open data, we surveyed the status of location information by data in open data portal. As a result, about 60% of the surveyed data had location information and the representative type was address. Appeared. Therefore, by suggesting location intelligence of open data based on address and how to use it, this study aimed to suggest a way that open data can play a role in creating future social data-based industry and policy establishment.

• Journal of the Korean association of regional geographers
• /
• v.3 no.2
• /
• pp.195-208
• /
• 1997

On the basis of the topographic maps in the 1910's and 1990's and the classification map of Landsat TM satellite image photographed on Sept 1, 1996, the spatial distribution and the current situation concerning tidal flats in Korea were studied by measuring the area with GIS Arc/Info system and examining the regional condition required to develop the tidal flats. The results are as follow; The tidal flat resources in Korea cover an area of about 3800 square meters, including the reclaimed one since the 1910's. And they are widely distributed in the west coast of South Jeonla, Kyunggi bay, Asan bay, the south coast of South Jeonla, Kunsan bay, Chunsoo bay, and the coast of South Kyungsang and Pusan when put in the order from bigger area. Given the area under the construction at present, more than 50% of the tidal flats are reclaimed ones. The tidal flats are being developed especially in Kyunggi and Asan bays because they perfectly measure up to the conditions required. For Kunsan bay, a remarkably good supply system of the alluvial sedimentary materials and a favorable coastline requirement for the coast of the South Jeonla also contribute to the development of the tidal flats. In the case study of Kunsan bay, it was shown that the shape of the tidal flat is making a continuous change and the area is getting bigger in terms of the multi-temporal change of the tidal flat development. However, while in the first half of the 20th century, the increasing rate of the area was considered to be rather high, it is considerably lowered almost to a standstill in the latter half of the century.