• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.11a
• /
• pp.26-26
• /
• 2000

본 연구에서는 풍력발전기용 복합재 회전날개의 설계단계에서 공력 설계 후 결정되어진 공력 형상을 기초로 하여 구조적 형상설계를 수행 할 때에 여러 가지 경우의 형상을 해석하여 이중 설계요구조건에 적합한 경우를 채택하는 시행착오 방법으로 인한 비효율적인 요소를 배재 하기 위해 고전 적층판 이론을 기초로 한 해석 프로그램을 사용하여 예비설계를 수행하는 수정된 설계절차를 제안하였으며 예비설계단계에서 신속하고 신뢰성 있는 해석결과를 얻을 수 있었다.(중략)

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.4
• /
• pp.44-52
• /
• 2002

Aerodynamic characteristics of a flapping airfoil in low Reynolds number flows are numerically studied using the unsteady, incompressible Navier-Stokes flow solver with a two-equation turbulence model. For more efficient computation of unsteady flows over flapping airfoil, the flow solver is parallel-implemented by MPI programming method Unsteady computations are performed for low Reynolds number flows over a NACA four-digit series airfoils. Effects of pitching, plunging, and flapping motion with different reduced frequency, amplitude, thickness and camber on aerodynamic characteristics are investigated. Present computational results yield a better agreement in thrust at various reduced frequency with experimental data.

• Journal of computational fluids engineering
• /
• v.5 no.3
• /
• pp.32-39
• /
• 2000

3차원 Euler 방정식과 adjoint법을 이용한 공력설계코드를 개발하였으며, 이를 초음속수송기의 주날개 설계에 적용하였다. 표면형상의 변화를 위해 Hicks-Henne함수를 사용하였으며, 내부격자점의 수정을 위해 타원형방정식법을 이용하였다. 나셀의 수직이동과 관련되지 않은 설계변수에 대해서는 내부격자점의 이동을 무시함으로써 계산시간을 크게 단축할 수 있었다. 양력과 날개단면두께를 일정하게 유지하면서 항력을 최소화하도록 단면형상을 최적화하였으며, 성공적인 결과를 얻음으로써 본 설계시스템의 타당성 및 효율성을 확인하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.6
• /
• pp.1-9
• /
• 2006

본 연구의 목적은 여러 가지 비행 모드 상의 로터 성능을 효율적으로 예측하는 것이다. 헬리콥터의 공력 특성을 예측하기 위한 비정상 source-doublet 패널 기법 기반의 수치 기법을 개발하였다. 후류의 형상 예측에는 시간 전진 자유후류모델이 사용되었다. 점성에 의한 확산을 고려한 후류의 roll-up 모사를 위하여 후류의 doublet 패널은 같은 강도의 와류고리로 대체하여 계산하였다. 후류와 양력면의 충돌 문제는 표면격자 내부에 들어간 와류고리의 포텐셜값을 제거하여 해결하였다. 제자리비행의 해석 시에 나타나는 와류 불안정성의 해결에는 slow starting과 vortex core growth 모델을 사용하였다. 로터 공력 해석 프로그램은 제자리비행과 전진비행에 대한 실험 결과와 비교하여 검증하였으며, 실험치와 일치하는 결과를 얻을 수 있었다.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.299-304
• /
• 2013

초음속 조건에서 Busemann biplane은 충격파의 중첩에 의해 항력 감소가 일어난다. 그러나 받음각이 증가 할 경우, 앞전에서 궁형 충격파가 발생하여 항력이 급격하게 증가한다. 이에 본 연구에서는 busemann biplane에 플랩을 주어 궁형 충격파를 감소시킬 수 있는 flap biplane의 플랩 길이와 각도의 변화에 따른 공력 성능의 변화를 분석하였다. Flap biplane의 공력성능을 기본 biplane형상 및 diamond airfoil과 비교한 결과, 동일한 양력 조건에서 항력은 diamond airfoil에 비해 약 75%정도 감소함을 확인하였다. 그리고 플랩의 길이와 양항비는 선형의 관계가 있음을 확인하였고, 특정한 플랩의 각도에서 최대 양항비가 도출된다는 사실을 확인하였다. 마지막으로 전압력의 감소를 충격파의 강도로 정의하고, 이를 비교한 결과 flap biplane의 전압력 감소가 diamond airfoil에 비해 약 25%정도가 더 작게 나타난 사실로 부터 flap biplane의 소음 감소 효과를 유추할 수 있었다. flap biplane은 초음속 영역에서 항력과 소음의 감소에 효율적인 익형임을 확인하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.10
• /
• pp.12-19
• /
• 2004

An aerodynamic design optimization system for three-dimensional wing was developed as a part of the future MDO framework. The present design optimization system includes four modules such as geometry design, grid generation, flow solver and optimizer. All modules were based on commercial softwares and programmed to have automated execution capability in batch mode utilizing built-in script and journaling. The integration of all modules into the system was accomplished through programming using Visual Basic language. The distributed computational environment based on network communication was established to save computational time especially for time-consuming aerodynamic analyses. The distributed aerodynamic computations were performed in conjunction with the global optimization algorithm of response surface method, instead of using usual parallel computation based on domain decomposition. The application of the design system in the drag minimization problem demonstrated considerably enhanced efficiency of the design process while the final design showed reasonable results of reduced drag.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.11
• /
• pp.917-926
• /
• 2012

The analysis of aerodynamic characteristics for aircraft propellers is studied to develop high efficiency composite propellers. It is to verify the accuracy and reliability of predicting the efficiency characteristics of aircraft propellers by applying nonlinear numerical analysis. The numerical simulation method incorporated the CFD code, which is based on RANS (Reynolds Averaged Navier-Stocks) equation. The study includes a comparative analysis between the numerical simulation results and the wind tunnel test results of the full-scale aircraft propeller. The comparison shows that thrust and power coefficients of the propeller calculated by nonlinear numerical analysis are higher than those based on the results generated from the wind tunnel test. The efficiency of the propeller calculated by numerical analysis matches closely to the efficiency based on the wind tunnel test results. The verification results are analyzed, then, will be used in optimizing the design and manufacture of the subject aircraft propeller studied.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.5
• /
• pp.425-432
• /
• 2009

In this study, the ability of neural network in modeling and predicting of the unsteady aerodynamic force coefficients of 2D airfoil with the data obtained from Euler CFD code has been confirmed. Neural network models are constructed based on supervised training process using Levenberg-Marquardt algorithm, combining this into genetic algorithm, hybrid genetic algorithm and the efficiency of the two cases are analyzed and compared. It is shown that hybrid-genetic algorithm is more efficient for neural network of complex system and the predicted properties of the unsteady aerodynamic force coefficients of 2D airfoil by the neural network models are confirmed to be similar to that of the numerical results and verified as suitable representing reduced models.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.6
• /
• pp.467-474
• /
• 2012

UAVs for reconnaissance and intelligence operations require long endurance capability, which demands high efficiency of the propulsion system. The distributed propulsion system(DPS) generates the thrust by replacing a large propulsion system with a number of small propulsion systems. A DPS distributed along the wing span can produce gains in propulsion efficiency by reducing ejection velocity. Also, the ingestion of boundary layers through the distributed DPS inlet and ejecting flow from the outlet can improve the lift to drag ratio of the vehicle. This study investigates the effects of locations and size of the inlet and outlet of the DPS on the blended-wing-body design based on Eppler 337 airfoil, with a CFD tool. The fans in the DPS are modeled as actuator disks for computational efficiency. The best location and aspect ratio of the inlet and outlet are found from lift-to-drag ratio and pitching moment considerations.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.30-44
• /
• 2021

Experimental investigation of counter-rotating propellers is subject to multiple time and cost constraint because of additional design parameters unlike single propeller. Also, a lot of computing time and resources are required for numerical analysis due to consideration of the interference between the upper and lower propellers. In the present study, numerical simulations were conducted to investigate the hover performance of counter-rotating propellers by using actuator method which is considered to be time-efficient. The accuracy of the present numerical methods was validated by comparing the ANSYS Fluent which is commercial CFD code. The axial spacing and rotational speed were selected as the analysis variables, and the aerodynamic performance was obtained under various conditions. Based on the obtained results, the Figure of Merit (FM) of single propeller and counter-rotating propellers and a prediction factor which enables prediction of counter-rotating propeller performance using a single propeller were derived to evaluate availability of the actuator method.