• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.6
• /
• pp.536-541
• /
• 2012

An instrumented pod has been developed to measure the aeroacoustic environment as well as the conventional data such as load, vibration, and aerodynamic heating of fighters during flight tests, confirming to the recently developed external pod design for fighters. This study presents the development of the measurement system in detail, being the first indigenous effort in its kind. The pod was designed to meet the requirements of the MIL-HDBK-1763 and MIL-STD-810 Method 515, which are the base to determine the locations and range of sensors. The Endevco 8510B-2 was selected as the sensor to withstand the harsh environment during the flight tests. In order to assess the integrity of the fabricated pod design, a ground run-up test of a KF-16 has been conducted with the pod installed at Station 5. The test results show that the system works well but the sound level exceeds the predetermined sensor range. The sensor range has been readjusted for flight test performed later.

• Journal of the KSME
• /
• v.27 no.5
• /
• pp.421-427
• /
• 1987

공력소음은 공기역학적 힘에 의해서나 또는 유동 내에서의 난류와 같은 유체운동에 의해서만 발 생되는 소리와 관계되며, 진동하는 바이올린 줄이나 확성기의 진동에 의해서 발생되는 즉, 고체 표면의 진동에 의해서 발생되는 고전적인 음향학과는 무관하다. 그리고 여기서는 주로 공력 소음문제를 다루되 자세하고 엄밀한 수학적 전개보다는, 간단한 실제적인 예를 들어서, 물리적 메카니즘을 가능한 한 자세히 기술하여 공력 소음의 이해를 돕고자 하였다. 또한 오래된 고전적 방법을 가능한 한 피하고 최근의 방법으로 설명하도록 하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.29-36
• /
• 1998

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.11
• /
• pp.883-891
• /
• 2018

In this paper, aerodynamic noise simulation was conducted using DES (Detached Eddy Simulation) and FW-H (Ffowcs Williams and Hawkings) acoustic analogy for the tandem cylinders which have configuration similar to a landing gear of airplanes. Numerical simulation for the tandem cylinders whose centers are 3.7D apart was carried out and results were compared with the measured data such as flow characteristics, pressure coefficients on the cylinder surfaces and far-field noise characteristics. It was confirmed that periodically shedded vortices released at the upstream cylinder and impinged on the downstream cylinder surface are major sources of aerodynamic noise. After verifying the computational method of using DES and FW-H acoustic analogy for predicting aerodynamic noise of tandem cylinders, additional simulation was conducted to examine the effect of attaching a splitter plate at the rear of the upstream cylinder. It was confirmed that the noise level in specific frequency band decreased significantly because the splitter plate changed the vortex shedding features and reduced dipole noise source.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.299-302
• /
• 2000

본 연구에서는 원형실린더에 의한 음향파의 산란현상을 전산공력음향학 기법을 이용하여 계산하였다. 특히 전산공력음항학에서 정확도를 위해 요구되는 좌표의 직교성을 유지하기 위해서 그에 대한 적절한 관계식을 유도하였으며 정확성의 검증을 위해서 수치적인 해를 이론적인 해와 비교, 분석하였다. 공간차분법으로는 Taylor 전개를 통하여 차 정확도를 가진 차분법을 바탕으로 주파수 공간에서 최적화 된 DRP(Dispersion Relation Preserving) 기법을 사용하였으며, 시간차분법으로는 Adams-Bashford 방법을 기준으로 최적화된 4단계 외재적(explicit) 적분방법을 사용하였다 벽면 경계조건으로는 가상점 개념을 이용한 경계조건을 사용하였으며 원방 경계조건으로서는 선형화 된 Euler 방정식의 점근해(Asymptotic Solution)을 이용한 방사경계조건(Radiation Boundary Condition)을 사용하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.75-80
• /
• 2009

The present paper focuses on the analysis of aero-acoustics characteristic by several boundary conditions. In this simulation, a high-order and high-resolution numerical schemes are used for the accurate computation of compressible flow with several boundary conditions including characteristic boundary conditions as well as extrapolation and zonal characteristic boundary condition. These boundary conditions are applied to the computation of two dimensional circular cylinder flows with Mach number of 0.3 and Reynolds number of 400. The computation results are validated with measurement datum and other computation results for the Strouhal frequency of vortex shedding, the mean drag coefficient and root-mean-square lift for the unsteady periodic flow regime. Secondary frequency is predicted by three kinds of boundary conditions characteristic.

• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.45-55
• /
• 2004

In this study, a time marching free wake method was used for the aerodynamic analysis and the boundary element method was used for the aeroacoustic analysis of the Tail Fan, respectively. In addition, variations of blades position in duct were performed and the aeroacoustic analysis shows a marginal improvement in noise level.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.247-250
• /
• 2000

본 논문에서는 최근 공력소음 및 소음제어 분야의 연구 동향을 정리하고, 이에 대한 미래의 가능성을 진단해 본다. 공력소음공학은 학문적 관심과 실용적 응용성을 동시에 만족시키면서, 이러한 목적을 달성하기 위해 수치적 혹은 실험적인 여러 가지 방법들을 다양하게 채용하고 있는 학제적 (interdisciplinary) 연구 분야이다. 자동차 냉각팬 소음, 헬리콥터 소음, HRSG 소음, 고속 철도 소음, 원심 압축기 소음, 수중 추진기 소음, 전산공력음향학, 능동 소음 제어, 충격파-와동 간섭 소음 등 현재 연구되어지고 있는 문제들을 간략하게 조명하면서, 환경 과학과 인간 공학으로서의 이 분야가 지닌 미래의 무한한 잠재력을 고찰한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.573-580
• /
• 1997

본 고에서는 공력음향학에 대한 여러 분야 중에서 최근 국내에서 관심 있게 연구되어온 분야에 대하여 그 연구 내용과 연구 방법 등을 소개하고자 한다. 먼저 전형적인 유체의 소음원에 대해서 설명하고, 이에 대한 수치적 해석방법과 무향풍동을 이용한 실험, 그리고 본 음향학 이론에 대한 응용 사례들에 대해서 간략히 소개하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.561-564
• /
• 2004

Acoustic holography is applied to automobile aeroacoustic noise. Automobile aeroacoustic noise has low coherence due to multiple independent sources and measurement noise. This paper discusses the reliability of acoustic holography on this low coherence condition. Main subjects are the number and position of reference microphones, which is used for a step-by-step scanning method, and measurement noise. A real automobile experiment verifies the results.