• Annual Conference on Human and Language Technology
• /
• 2019.10a
• /
• pp.241-245
• /
• 2019

문서 요약, 키프레이즈 추출과 패러프레이징은 인간이, 혹은 기계가 문서를 보다 원활히 이해하는 데에 도움을 주는 방법론들이다. 우리는 본 연구에서 질문/요구 등의 지시성 발화를 대상으로, 핵심 내용을 추출하는 간단한 방법론을 통해 한국어 병렬 코퍼스를 구축한다. 또한, 우리는 인적 자원을 활용한 효율적인 데이터 증강 전략을 통해 부족하거나 필수적인 유형의 발화의 양을 보강하고, 약 5만 쌍 크기의 코퍼스를 제작하여 이를 공개한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.410-413
• /
• 2003

We have developed the measurement system for the high power laser The absorber is made of gold-plated copper cavity. The calibration heater is using a manganin(CuMn12Ni ; Isabellenhutte) coil, and output power is measured by using of resistance bridge with composed manganin and copper coil. Developed system can measure for 5∼1000w laser output power range. Calibration factors are 489.13 J/mV at 100W range and 489.13 J/mV at 500W range. Correction factors are 0.99 at 100W range and 1.006 at 500W range.

• The Journal of the Korea Contents Association
• /
• v.15 no.9
• /
• pp.47-60
• /
• 2015

Original play of theatrical troupe Yeonwoo Stage has gone through history represented by (i) the development period of "research on play," (ii) the resistance/growth period of "play movement," (iii) the prime/segmentation period of "metaphor for reality," (iv) the crisis/transition period of "rediscovery of reality," and (v) the challenge/advancement period of the "active development of repertoire." "Collective creation" based on the singe-representative system was a solution to overcome difficult circumstances, crisis facing the theatrical troupe and the lack of resources in the development period and the resistance/growth period, "co-creation" based on the five-representative system, the two-representative system, the system of an operation committee consisting five members, etc. in the prime/segmentation period and the crisis/transition period, and "planning and production" based on the single-producer system in the challenge/advancement period. "Collective creation" system was operated by the entire theatrical troupe, which was led by a director; "co-creation" system was operated by performers, who were directed by a director (-playwriter); and "planning and production" system was operated both internally and externally and was led by a producer. During its long history of developing original play, Yeonwoo Stage has (i) expanded the scope of Korean-style narrative, (ii) succeeded collective creation culture to the next generation, (iii) followed the trend of the times, (iv) attempted to attract popular empathy.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.201-208
• /
• 2013

This paper is a study of an empirical design of an open-ended coaxial cavity resonator. It can be done by using the radius of the inner conductor, the inner radius and the length of the resonator. However, the basic coaxial transmission -line theory can be seen that the characteristics of the resonant frequency and the Q value are varied by the change of length, regardless of the value of radius of the inner conductor and inner radius of the resonator. We find out the impact of radius of the inner conductor, inner radius of the resonator and the length of the resonator parameter and propose the optimized empirical resonator design method by reducing the error between the theoretical value and the design value. Based on the simulation, several resonators are fabricated by the size of 14 mm for the radius of inner conductor, 2 mm, 5 mm, 10 mm respectively for the inner radius of resonator, and 8.5 mm for the length of the resonator. The resonant frequencies of the produced resonators were measured at 6.1, 5.7, 6.5 GHz respectively. According to the result of simulation and measurement, we know that we can design the relatively exact open-ended coaxial cavity resonator by applying the basic coaxial transmission-line theory directly when the length of the resonator is less than 10 mm, and adding the correction factor of 0.5 GHz to the calculated resonant frequency in case of more than 10 mm of the length of the resonator.

• Journal of radiological science and technology
• /
• v.33 no.3
• /
• pp.261-268
• /
• 2010

This study is compared that the dose distribution by experimentation and radiation therapy planning (RTP) when the air cavity region was treated high energy photon. The dose measurements were performed with a 6 MV photon beam of linear accelerator. The polystyrene and self made acyl phantom were similar to tissue density of the human body. A parallel plate chamber was connected to an electrometer. The measurement setup was SCD (Source Chamber Distance) 100 cm and the distance of surface from air cavity was 3 cm. Absorbed dose of interface were measured by area and height. The percent depth dose were measured presence and absence of air cavity, depth according to a ratio of field size and air cavity size. The dose distribution on planning was expressed to do the inhomogeneity correction. As the area of air cavity was increased, the absorbed dose were gradually reduced. It was slightly increased, when the height of air cavity was changed from 0 cm to 0.5 cm. After the point, dose was decreased. In case of presence of air cavity, dose after distal air cavity interface was more great than absence of air cavity. The rebuild up by field size and area of air cavity occurred for field size, $4{\times}4\;cm^2$, $5{\times}5\;cm^2$ and $6{\times}6\;cm^2$, with fixed on area of air cavity, $5{\times}5\;cm^2$. But it didn't occur at $10{\times}10\;cm^2$ field size. On the contrary, the field size was fixed on $5{\times}5\;cm^2$, rebuild up occurred in area of air cavity, $4{\times}4\;cm^2$, $5{\times}5\;cm^2$. but, it did not occur for air cavity, $2{\times}2\;cm^2$, $3{\times}3\;cm^2$. All of the radiation therapy planning were not occurred rebuild up. It was required to pay attention to treat tumor in air cavity because the dose distribution of planning was different from the dose distribution of patient.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.2
• /
• pp.9-21
• /
• 1999

The waterjet is very widely used today in propulsion system of high speed vessel but manufacturer is limited because of an efficiency and a difficulty of a manufacture on the inlet configuration of the waterjet. The importancy in designing the inlet configuration of the waterjet lies on the minimization of the cavitation which is largely affecting the efficiency. In this paper, the configuration analysis is carried out to find a optimum shape which is minimizing the cavitation using a two dimensional potential-based panel method with an inlet configuration of a flush type. Also, it is developed a direct design method finding an inlet configuration by a given pressure distributions. The numerically obtained optimum shape using this configuration analysis method show a good agreement compared to the Kashiwadani's results. It is carried out a direct design method over a lip and a ramp of an inlet configuration wish pressure distributions obtained a result of the configuration analysis and the results show a good agreement compared to original configuration.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.6
• /
• pp.30-42
• /
• 2022

OSC is a type of supply chain and value chain that spans the entire process of construction production (planning, design, construction, maintenance, etc.). It is a method of producing the final object by manufacturing it in a factory, transporting it to the site, installing and construction. This research as is the construction cost was compared for each case A, which applied the PC method, and case B, which applied the RC method. In the case of applying the PC method (excluding the PC design cost), compared to the case where only the RC method was applied, the frame construction cost per unit quantity (m³) increased by about 70% (50% based on the total RC construction type). Of the total frame construction cost of PC method application, PC accounted for 90.2%, 'PC manufacturing cost' 54.8%, 'PC assembly cost' 28.5%, and 'transportation cost' accounted for 6.89%. Also a decision-making framework that can consider both costs and benefits was established. In the case of benefits, the construction period, defect repair, disaster occurrence, energy efficiency, noise/dust/waste, and greenhouse gas emission indicators reflecting OSC technical advantages were presented. It can contribute to providing a basis for helping decision-making on the introduction of PC apartment houses using OSC.

• The Journal of the Korea Contents Association
• /
• v.15 no.5
• /
• pp.98-107
• /
• 2015

This study analyzed the story of 'Good Morning, Ladies of the World', a multicultural program of a community radio Gwanak FM. Furthermore, the study performed an in-depth interview on Korean producing staffs and migrant casts in order to figure out the contents for the improvement of awareness and for the design of multicultural media story telling. As a result, the migrant women presented overall public discourses on their own culture, climate and customs as a sense of representative. While Korean staffs wanted to understand and communicate with their culture and to share private experiences, migrant women wished understanding and respect to their culture and removal of discrimination or prejudice. Accordingly, the storytelling design for the improvement of multicultural awareness must be a private discourse on the basis of a public discourse, and it turned out that the user of a mediator who experienced and knew culture of Korea and the migrant is necessary. And, this study recommended the need of education of migrant women and media support for a proper story planning, structuring and delivery.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.369-369
• /
• 2016

홍수피해 저감을 위한 지하방수로나 지하저류지 등은 홍수 방어를 위한 도심 내의 토지 확보 부담을 줄이며, 집중 호우 발생 시 내수를 초기에 신속하게 배제하여 제내지 침수 피해를 줄이는데 효율적으로 활용된다. 미국 및 일본, 홍콩과 같은 외국에서는 이미 지하방수로 및 지하저류지를 활용한 홍수피해 저감방안을 수립하여 활용하고 있으며, 최근 국내에서도 치수 계획 수립 시 지하방수로 혹은 지하저류지 시설 도입이 활발히 검토되고 있으나 적용사례가 전무하여 제반기술이 부족하고 많은 시행착오가 예상된다. 제반설계기술의 경우는 구조적인 방안이 모색되어야 하며 대표적으로, 지하방수로 유입구 형상이, 동일한 흐름조건에 대한 유량배제효율에 가장 지배적인 영향인자로 알려진 바 있으며 다양한 유입구 형상설계방안이 기존 실험적 연구 및 외국 설계지침에 제안된 바 있다. 지하방수로는 접근 수로를 통해 유입된 유량이 유입구를 지나며 가속되어 와류 흐름을 형성하며 수직 갱도로 유입되는 구조를 갖기 때문에 지하방수로의 방류 효율을 높이기 위해서는 유입구에서 흐름 특성을 파악하는 것이 중요하다. 이때 유입흐름특성이 사류일 경우 혹은 급격하게 유입 유량이 많아지는 경우 수직 갱도 내에 공기 공동이 형성되어 구조물 파손, 와류의 발생으로 인한 배제효율 감소 등의 피해를 야기할 수 있으므로 수리학적으로 규명할 필요가 있다. 따라서 본 연구에서는 지하방수로의 기존 유입구형상에 대한 장단점을 비교하고, 개선점을 적용하여 수리모형을 제작하여 개수로 실험장치에 설치하고 다양한 유입흐름조건에 따라 수리실험을 수행하였다. 그 결과 유입흐름조건에 따라 발생하는 유입구의 공기 공동의 발달 및 소멸 그리고 규모변화를 정량적으로 분석하여, 유입부의 가능 단면적이 큰 수직갱도인 경우, 유량배제 효율이 감소되는 분석결과에 적절하게 일치하였으며, 본 연구결과는 향후 지하방수로 설계의 제반기술의 수립 시 효율적인 활용이 가능하다.

• Aerospace Industry
• /
• v.50
• /
• pp.18-21
• /
• 1997

표류하던 중형항공기사업에 새바람이 불었다. 중국과의 협상결렬과 포커사의 인수불발로 답보상태에 빠져있던 중형기사업조합은 그동안 대안사업을 추진한 결과 지난 97년 4월 11일 유럽의 지역간 항공기 제작업체인AI(R)사와 항공기국제공동개발에 대한 양해각서(MOU)를 체결하고 올 하반기부터 본격적으로 사업을 추진키로 했다. 본 고에는 그동안 AI(R)사의 선정과정과 배경 그리고 협상내용을 살펴보기로 한다.