• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.46-54
• /
• 1987

자동차의 외형을 설계하는 과정에서 미적인 관점을 떠나 역학적으로 고려할 때에는 공기역학이 매우 중요하게 된다. 이 분야에서 연구하는 전문가에게는 잘 알려진 내용이 될지는 모르겠으나 자동차의 설계 및 개발에 종사하는 일반연구자에게는 공기역학에 관한 문헌 및 전문서적 또한 주 위에서 쉽게 얻을 수는 있으나 부담없이 인식되기에는 그리 쉬운 일은 아니다. 이와 관련하여 Car Stying Volume 50+1/2의 별책으로 간행된 특집호에 여러 가지 흥미있는 내용이 기술 설명 되어 있다. 이는 1985년 발행되었으며 일본자동차연구소에 재직중인 무능진리씨가 해설하였다. 이후 본 내용은 여기서 발췌함을 밝혀둔다. 자동차에 관한 공기역확은 주로 다음과 같은 성능 향상을 위하여 필요하다. (1) 주행연료비 절약 (2) 최고속도의 향상 (3) 고속주행시 조종안정성의 향상 (4) 횡풍에서 주행안전성 향상 (5) 엔진이나 제동장치 등의 냉각성능 향상 (6) 바람에 의한 소음의 감소 (7) 환기성능의 향상 (8) 제상성능의 향상 (9) 공기 조화성능의 향상 (10) 먼지 또는 오물의 부착방지 및 억제 (11) 창문 와이퍼의 작동 등이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.578-585
• /
• 2018

This paper proposes a design method for a 3-phase interior permanent magnet synchronous motor (IPMSM) and clamping force control method for an electro-mechanical brake (EMB) using co-simulation for a high-speed train (HST). A traditional pneumatic brake system needs much space for the compressor, brake reservoir, and air pipe. However, an EMB system uses up to 50% less space due to the use of a motor and electric wires for controlling the brake caliper. In addition, it can reduce the latency time for brake control because of the fast response and precise control. A train that has many brakes is advantageous for safety because of the control by sharing the braking force. In this paper, a driving method for a cam-shaft-type EMB is modeled. It is different from the ball-screw-type brakes that are widely used in automobiles. In addition, a co-simulation method is proposed using JMAG and Matlab/Simulink. The IPMSM was designed and analyzed with the JMAG tool, and the control system was simulated using Matlab/Simulink. The effectiveness of the co-simulation results of the mechanical clamping force and braking force was verified by comparison with the clamping force specifications of a HEMU-430X HST.

• Journal of the KSME
• /
• v.32 no.11
• /
• pp.910-916
• /
• 1992

신엔진 개발에서 동력을 증대시키려는 연구와 얻어진 에너지가 엔진을 구동시키기 위한 내부에 너지로 소비되지 않고 가능한 제동마력으로 보내려는 에너지 절약의 측면에서 접근하려는 연구가 있다. 전자의 연구개발은 연료와 공기의 열유동 해석, 혼합비 조절, 점화시기 및 방법, 연료의 선정, 터보차저의 설치, 즉 엔진에 공급되는 고열원부의 열량 $Q_H$ 를 증가 시키든지 또는 대기중으로 방출하는 저열원부의 열량$Q_L$ 을 어떻게 감소시키느냐에 관심을 가지고 있는 연구이다. 그러나 후자의 경우는 이미 생산된 에너지를 가능한 한 소비시키지 않고 모두 제동 마력으로 보내도록 노력하는 연구, 즉 트라이몰로지에 기초를 둔 연구개발 분야이다. 엔진개발 에서 트라이볼로지의 역할은 대단히 중요하나 기술 자체가 대단히 미시적이기 때문에 신기술 개발이 대단히 어려우며, 이 분야의 필요성이 크게 대두된 것도 십수년 전에 불과하므로 기술 축적이 많이 안된 분야 중의 하나이다. 트라이볼로지 기술의 필요성이 현저하게 부각되기는 하 였지만 해결하기가 대단히 어려운 분야이다. 그러나 일단 섬세하고도 미시적인 트라이볼로지 기술의 벽을 극복하면 큰 효과를 발휘하게 된다. 고도의 첨단기술을 개발하고 적용해야 하는 선진기술국에서는 에너지 절약의 측면보다는 새로운 기술개발의 측면에서 트라이볼로지 기술을 적극적으로 지원하고 있다.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.119-124
• /
• 2001

As the brake control valve of freight car, there are sliding valve and diaphragm one. In this study, we measured and analyzed pneumatic characteristics of brake system of the freight car by using real train experiment. The difference of the release time appears in the freight car incorporated with sliding and diaphragm valve respectively. We adapted quick release valve to reduce the difference of the release time and also found that this valve is useful for the purpose.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.696-701
• /
• 2004

Electric vehicle that is manufactured present by development of electric vehicle technology were available automatic driving. Control of air breaking system for precision stopping is important at automatic driving. Current Electric vehicle is doing precision stopping using braking force control. Braking force control is difficult to take static deceleration by rail condition or change of friction coefficient. Therefore, Proposed the controller in this study is deceleration controller. Designed controller is a robust controller that take state control characteristic for modelling error.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.3
• /
• pp.519-528
• /
• 2019

Current brake system changes the kinetic energy into heat energy by friction-type of brake that the braking action is diverging into the air. The system has a device called a retarder that generates braking force. High-tech research on the high-speed response characteristics of retarders utilizing part of the braking energy of the retarder to save electrical energy consumption is already underway in advanced countries. In this paper, we propose DC-DC converter which converts 3-phase voltage generated from retarder to 24V DC voltage for battery charging and verify its validity through experiments.

• Nuclear Engineering and Technology
• /
• v.24 no.2
• /
• pp.154-162
• /
• 1992

Two major goals for chemical cleaning on the secondary side of nuclear steam generators are to remove sludge effectively and to minimize corrosion of base metals. In this work, electrochemical and sludge dissolution behaviors have been investigated in order to find out which parameters are critical and important during a copper removal process for chemical cleaning and to evaluate safety aspects and effectiveness of two major copper removal processes developed commercially in foreign countries. Hydrogen peroxide is vert effective for the process to use EDTA, NH$_4$OH and EDA at 38$^{\circ}C$ to control the potential of copper in a potential range sood for copper sludge removal. Corrosion rates for carbon steel SA 285 Gr.C and Alloy 600 are very small during this process if it is controlled properly. However, the corrosion rate of SA 285 Gr.C will be increased greatly if its corrosion potential is maintained below -450mV. The process to use EDA and ammonium carbonate is effective at 6$0^{\circ}C$ to dissolve copper sludge if the corrosion potential of copper can be controlled above -200mV. However, it is very difficult to raise the corrosion potential of copper to this range by air blowing and stirring.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.2
• /
• pp.230-237
• /
• 2012

Engine makers are lately interested in the gas engine development as the alternative for diesel engine in order to cope the rise of oil price and the environmental regulation. So, STX has developed the 1.6MW gas engine which was converted from 22HLX diesel engine. The gas engine developed with precombustion chamber, which has good performance of 21bar BMEP at engine speed 1000rpm and low $NO_X$ emission of 50ppm at 15% oxygen composition, has been developed recently. Especially, it has a good thermal efficiency of 45% and a reduction efficiency of green house gas($CO_2$) emission of 25% than a conventional diesel engine.

• Journal of Advanced Navigation Technology
• /
• v.24 no.4
• /
• pp.280-284
• /
• 2020

To improve maintenance, environmental issues, efficiency, and economics to supplement the current air braking problems, braking power related to the entire driving range of electric brakes was presented in all areas from stop to high speed. As a result, the efficiency of braking power and cutting-edge technology have expanded energy use, and through this paper, noise in all driving ranges can be reduced, and maintenance costs can be reduced. The traction motor must bring the variable speed of the traction motor and the terminal voltage of the traction motor to drive high-speed driving characteristics that control the maximum voltage of the inverter. Therefore, we studied driving and brake changes through simulation.

• Journal of the Korean Institute of Gas
• /
• v.15 no.5
• /
• pp.50-56
• /
• 2011

A preliminary experimental study of new concept air hybrid engine, which stores compressed air in the tank during braking and re-use it to propel vehicle during crusing or acceleration, was carried out in this study. A single cylinder engine was modified to realize the concept of air hybrid engine. Independent variable valve lift system was adopted in one of the exhaust valves to store the compressed air into the air tank during compression period. An air injector module was installed in the place of spark plug, and the stored compressed air was supplied during the expansion period to realize air motoring mode. For air compression mode, the tank with volume of 30 liter could be charged up to more than 13 bar. By utilizing this stored compressed air, motoring work of 0.41 bar of IMEP(Indicated mean effective pressure) at maximum can be generated at the 800rpm conditions, which is higher than the case of normal idle condition by 1.1 bar of IMEP.