• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.448-448
• /
• 2013

최근 생물학적 분석 기구에서 시료를 처리, 분리, 검출, 샘플링 또는 분석하기 위해 사용되는 마이크로펌프(Micropump)에 대한 관심이 높아지고 있다. 또한 전자소자의 성능과 신뢰성의 증진을 위한 전자소자의 열 문제를 해결하기 위해 냉각장치로 마이크로 펌프가 적용되기도 한다. 그 외에도 마이크로펌프는 다양한 분야에 응용이 가능하다. 마이크로펌프는 작동 방식에 따라 압전형, 공압형, 열공압형, 연동형 등의 여러 종류로 분류되고 있다. 그중에서도 최근에는 연동형 마이크로 펌프의 개발이 각광받고 있다. 기존의 연동형 펌프들은 다중 챔버를 가지고 있으며, 각각의 챔버 내에서 Dead volume이 많이 발생할 뿐만 아니라 이상적인 연동운동과는 차이가 많이 나는 문제점을 가지고 있다. 또한 압전방식과 열공압방식은 느린 응답성으로 인해 효율적인 유체 이동이 어렵다. 본 논문에서는 이상적인 연동운동을 구현하기 위하여 기존의 연동형 펌프의 단점을 보완하고, 하나의 챔버에 다중전극 구조를 가지는 정전기력방식의 연동형 펌프를 개발하였다. 정전기력방식으로 펌프를 구동함으로써, 저전력으로 펌프구동이 가능하며, 하나의 챔버에 다중전극을 설치함으로써 이상적인 연동운동을 재현하였다. 그리고 Dead volume을 최소화 하였다. 또한, 빠른 반응속도로 인해 효율적인 유체 이동을 실현시킬 수 있었다. 본 연구에서 제안된 마이크로 펌프의 구성은 크게 챔버, 박막, Inlet/outlet hole으로 구성되었다. 챔버는 Si-wafer에 wet etching 공정으로 제작 하였고 그 위에 알루미늄 박막을 200 nm 증착시켰다. 챔버는 가로 32 mm, 세로 5 mm, 깊이는 $15{\mu}m$, 부피는 $200{\mu}l$으로 제작되었다. 박막은 폴리이미드(polyimide)를 사용하여 $3{\mu}m$의 두께로 제작 되었으며, 폴리이미드 박막 사이에는 200 nm 두께의 4개의 알루미늄 박막 전극을 삽입시켰다. 삽입된 4개의 전극에 개별적인 전기신호를 보냄으로써 연동운동이 가능하다. Inlet/outlet hole은 직경 2 mm의 크기로 제작되었으며, 튜브를 연결하여 유체가 흐를 수 있는 체널을 형성하였다. 제작된 마이크로 펌프의 구동전압은 115 V이며, 인가되는 주파수를 1 Hz~100 KHz까지 변화시켜 유량을 측정하였다. 작동 유체는 공기이며, 유량측정은 튜브 내에 물방울을 삽입하여 시간에 따른 이동거리를 관측하였다. 측정결과 2.2 KHz에서 2.4 mm/min의 가장 높은 유량을 확인할 수 있었다. 본 연구를 통해 제안된 연동형 마이크로펌프는 이상적인 연동운동이 가능함으로써 기존의 연동형 방식의 문제점을 보완하였으며, 생명과학, 의학, 화학 등의 분야에서 적용이 가능하리라 기대된다.

• 한국산림과학회지
• /
• 제9권1호
• /
• pp.1-44
• /
• 1969

이상(以上)과 같이 조사(調査) 또는 실험(實驗)한 결과중(結果中) 그 중요(重要)한 것을 요약(要約)하면 다음과 같다. 1. 실험용(實驗用) 지상식(地上式) 양송이 재배사(栽培舍)의 효과(効果)에 관(關)하여는 이미 실험결과(實驗結果)및 그 분석(分析)에서 지적(指摘)된 바 있거니와 그 측벽(側壁)및 천정(天井)의 구조(構造)는 재배사(栽培舍)를 외계(外界)의 기상조건(氣象條件)에서 격리(隔離)하는데 충분(充分)한 효과(効果)가 있는 것으로 고려(考慮)된다. 2. 반지하실(半地下室)에 구축(構築)한 실험용(實驗用) 태양식(太陽式) 양송이 재배사(栽培舍)의 효과(効果)에 관(關)하여는 실험결과(實驗結果)및 그 분석(分析)에서 지적(指摘)한 바와 같거니와 태양열(太陽熱)을 이용(利用)하는데 있어 충분(充分)한 효과(効果)가 있는 것으로 고려(考慮)된다. 그러나 이것을 농가(農家)에 적용(適用)하기 위(爲)하여는 다음과 같은 제점(諸點)이 개선(改善)되어야 할 것으로 고려(考慮)된다. 즉 (1) 태양식(太陽式)의 지붕과 천정(天井)은 실험용(實驗用) 지상식(地上式) 재배사(栽培舍)의 그것과 동일(同一)히 하고 (2) 태양열(太陽熱) 수열장치(受熱裝置)는 적당(適當)히 재고(再考)되어야 할 것으로 고려(考慮)된다. 태양열(太陽熱) 수열장치(受熱裝置)는 그림 40과 같이 하면 유효(有效)할 것으로 구상(構想)된다. 3. 본실험연구(本實驗硏究)에서 실시(實施)한 각종(各種)의 환기법중(換氣法中) G.E.-C.V. 및 V.S.-C.V. 환기법(換氣法)이 가장 효과적(效果的)인 것으로 본다. 4. 측벽수직(側壁垂直)및 지중(地中) 환기장치(換氣裝置)는 이미 지적(指摘)된 바와 같이 농가(農家) 양송이 재배사(栽培舍)의 자연환기법(自然換氣法)으로 실용적(實用的) 가치(價値)가 충분(充分)하다. 그것은 이들 환기장치(換氣裝置)는 그 환기로(換氣路)를 통(通)하여 사내(舍內)에 유입(流入)되는 외기(外氣)의 온도(溫度)를 인공적(人工的)으로 가열(加熱)이나 또는 냉각(冷却)하지 않고 사내온도(舍內溫度)에 접근(接近)하도록 조절(調節)하는 효과(効果)가 있기 때문이다. 지금 외온(外溫)을 $X^{\circ}C$로 할 때 각종(各種) 환기로(換氣路)에 의(依)하여 흡수(吸收)되는 온도(溫度) $Y^{\circ}C$을 X의 흉수(凶數)로 하는 실험식(實驗式)은 다음과 같이 회귀직선(回歸直線)으로 표시(表示)된다. $$G.P.{\cdots}Y=0.9x-12.8$$ $$G.E.{\cdots}Y=0.96x-15.11$$ $$V.S.{\cdots}Y=0.94x-17.57$$ 5. 재배사내(栽培舍內)에 유입(流入)되는 공기(空氣)및 사외(舍外)로 배출(排出)되는 공기(空氣)에 관(關)한 실험식(實驗式)은 각각(各各) 다음과 같이 회귀직선(回歸直線)및 지수곡선(指數曲線)으로 표시(表示)된다. (1) 배출속도(排出速度) Ycm/Sec를 유입속도(流入速度)${\times}$cm/Sec의 흉수(凶數)로 하는 회귀직선식(回歸直線式) G.E.-C.V.(50%)법(法) $${\cdots}Y=1.01x-1.65$$ G.E.-C.V.(100%)법(法)$${\cdots}Y=0.42x+2.03$$ V.S.-C.V.(100%)법(法)Y=0.85x+0.96 (2) 배출량(排出量) Y $m^3/hr$ 유출량(流出量) ${\times}m^3/hr$의 함수(凾數)로 하는 회귀직선식(回歸直線式) G.E.-C.V.(50%)법(法)$${\cdots}Y=2.59x-10.88$$ G.E.-C.V.(10%)법(法)Y=2.16x+26.53 (3) 상면(床面) 공기이동(空氣移動) 속기(速氣) Y m/Sec를 배출공기(排出空氣) 속도(速度)${\times}$m/Sec의 함수(凾數)로 하는 회귀직선식(回歸直線式) G.E.-C.V.(50%)법(法)$${\cdots}Y=0.54x+0.84$$ (4) $Co_2$ 축적량(蓄積量)Y(%)를 상면(床面) 공기이동(空氣移動) 속도(速度)${\times}$cm/Sec의 함수(凾數)로 하는 회귀직선식(回歸直線式) G.E.-C.V(50%)법(法)$${\cdots}Y=114.53-6.42x$$ (5) $Co_2$ 축적량(蓄積量)Y(%)를 배출(排出) 공기량(空氣量) $m^3/hr$ 함수(凾數)로 하는 지수곡선식(指數曲線式) G.E.-C.V.(50%)법(法) -$$y=127.18{\times}1.0093^{-X}$$ (6) natural vontilation system에 있어서 양송이 생육(生育)에 적합(適合)한 환경적조건(環境的條件)을 마련하기 위(爲)한 환기구(換氣口)의 단면적(斷面績)은 재배사(栽培舍) 전용적(全容積)에 대(對)하여 다음과 같은 비율(比率)로 할 수 있다. G.E. (지중유입환기구단면적(地中流入換氣口斷面績) $${\cdots}0.3-0.5%$$(요조절(要調節)) C.V. (천정배출환기구단면적(天井排出換氣口斷面績) $${\cdots}0.8-1.0%$$(요조절(要調節)) (7) 본연구(本硏究)에서 실험(實驗)한 각종(各種)의 가열장치중(加熱裝置中) 무압(無壓) 증기수(蒸氣水) 보이라로 사용(使用)할 수 있는 온수(溫水) 보이라가 농가용(農家用) 양송이 재배사(栽培舍) 가열장치(加熱裝置)로서, 그 효과면(効果面)에 있어서나 또는 그가격면(價格面)에 있어서 최적합(最適合)하다는 것이 확인(確認)되고 있다.

• 설비공학논문집
• /
• 제14권12호
• /
• pp.1102-1139
• /
• 2002

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2000 and 2001 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD technologies were widely applied for developing facilities and their systems. (2) Most of papers related with heat transfer analysis and heat exchanger shows dealt with convection, evaporation, and channel flow for the design application of heat exchanger. The numerical heat transfer simulation studies have been peformed and reported to show heat transfer characteristics. Experimental as well as numerical studies on heat exchanger were reported, while not many papers are available for the system analysis including heat exchanger. (3) A review of the recent studies on heat pump system shows that performance analysis and control of heat pump have been peformed by various simulations and experiments. The research papers on multi-type heat pump system increased significantly. The studies on heat pipe have been examined experimently for change of working characteristics and strut lure. Research on the phase change has been carried out steadily and operation strategies of encapsulated ice storage tank are reported experimentally in several papers. (4) A review of recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. Evaporation and condensation heat transfer characteristics are investigated for tube shapes and new alternative refrigerants. Studies on components of refrigeration/air conditioning system are carried to examine efficiency for various compressors and performance of new expansion devices. In addition to thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out, however research works on two-phase flow seemed to be insufficient. (5) A review of the recent studies on absorption cooling system indicates that heat and mass transfer phenomena have been investigated to improve absorber performance. Various experimental data have been presented and several simulation models have been proposed. A review of the recent studies on duct and ventilation shows that ventilation indices have been proposed to quantify the ventilation performance in buildings and tunnels. Main efforts have been focused on the applications of ventilation effectiveness in practice, either numerically using computational fluid dynamics or experimentally using tracer gas techniques. (6) Based on a review of recent studies on indoor thermal environment and building service systems, research issues have mainly focused on many innovative ideas such as underfloor air-conditioning system, personal environmental modules, radiant floor cooling and etc. Also, the new approaches for minimizing energy consumption as well as improving indoor environmental conditions through predictive control of HVAC systems, various activities of building energy management and cost-benefit analysis for economic evaluation were highlighted.

• 설비공학논문집
• /
• 제12권12호
• /
• pp.1098-1125
• /
• 2000

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 1998 and 1999 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. 1) A review of the recent studies on fluid flow, turbomachinery and pipe-network shows that many experimental investigations are conducted in applications of impingement jets. Researches on turbulent flows, pipe flows, pipe-networks are focused on analyses of practical systems and prediction of system performance. The results of noise reduction in the turbomachinery are also reported. 2) A review of the recent studies on heat transfer analysis and heat exchanger shows that there were many papers on the channel flow with the application to the design of heat exchanger in the heat transfer analysis. Various experimental and numerical papers on heat exchanger were also published, however, there were few papers available for the analysis of whole system including heat exchanger. 3) A review of the recent studies on heat pump system have focused on the multi-type system and the heat pump cycle to utilize treated sewage as the heat source. The defrosting and the frosting behaviors in the fin-tube heat exchanger is experimentally examined by several authors. Several papers on the ice storage cooling system are presented to show the dynamic simulation program and optimal operation conditions. The study on the micro heat pipes for the cooling of high power electronic components is carried out to examine the characteristics of heat and mass transfer processed. In addition to these, new type of separate thermosyphon is studied experimentally. 4) The recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. New systems operating with natural refrigerants are drawing lots of attention. In addition to these, evaporation and condensation heat transfer characteristics of traditional and new refrigerants are investigated for plain tubes and also for microfin tubes. Capillary tubes and orifice are main topics of research as expansion devices and studies on thermophysical properties of new refrigerants and refrigerant/oil mixtures are widely carried out. 5) A review of the recent studies on absorption cooling system shows that numerous experimental and analytical studies on the improvement of absorber performance have been presented. Dynamic analysis of compressor have been performed to understand its vibration characteristics. However research works on tow-phase flow and heat transfer, which could be encountered in the refrigeration system and various phase-change heat exchanger, were seemed to be insufficient. 6) A review of recent studies on duct system shows that the methods for circuit analysis, and flow balancing have been presented. Researches on ventilation are focused on the measurement of ventilation efficiency, and variation of ventilation efficiency with ventilation methods by numerous experimental and numerical studies. Furthermore, many studies have been conducted in real building in order to estimate indoor thermal environments. Many research works to get some information for cooling tower design have been performed but are insufficient. 7) A review on the recent studies on architectural thermal environment and building mechanical systems design shows that thermal comfort analysis is sitting environment, thermal performance analysis of Korean traditional building structures., and evaluation of building environmental load have been performed. However research works to improve the performance of mechanical system design and construction technology were seemed to be insufficient.

• 설비공학논문집
• /
• 제20권6호
• /
• pp.427-446
• /
• 2008

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2006 has been accomplished. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro heat exchanger and siphon cooling device using nano-fluid. Traditional CFD and flow visualization methods were still popular and widely used in research and development. Studies about diffusers and compressors were performed in fluid machinery. Characteristics of flow and heat transfer and piping optimization were studied in piping systems. (2) The papers on heat transfer have been categorized into heat transfer characteristics, heat exchangers, heat pipes, and two-phase heat transfer. The topics on heat transfer characteristics in general include thermal transport in a cryo-chamber, a LCD panel, a dryer, and heat generating electronics. Heat exchangers investigated include pin-tube type, plate type, ventilation air-to-air type, and heat transfer enhancing tubes. The research on a reversible loop heat pipe, the influence of NCG charging mass on heat transport capacity, and the chilling start-up characteristics in a heat pipe were reported. In two-phase heat transfer area, the studies on frost growth, ice slurry formation and liquid spray cooling were presented. The studies on the boiling of R-290 and the application of carbon nanotubes to enhance boiling were noticeable in this research area. (3) Many studies on refrigeration and air conditioning systems were presented on the practical issues of the performance and reliability enhancement. The air conditioning system with multi indoor units caught attention in several research works. The issues on the refrigerant charge and the control algorithm were treated. The systems with alternative refrigerants were also studied. Carbon dioxide, hydrocarbons and their mixtures were considered and the heat transfer correlations were proposed. (4) Due to high oil prices, energy consumption have been attentioned in mechanical building systems. Research works have been reviewed in this field by grouping into the research on heat and cold sources, air conditioning and cleaning research, ventilation and fire research including tunnel ventilation, and piping system research. The papers involve the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies on indoor air quality took a great portion in the field of building environments. Various other subjects such as indoor thermal comfort were also investigated through computer simulation, case study, and field experiment. Studies on energy include not only optimization study and economic analysis of building equipments but also usability of renewable energy in geothermal and solar systems.

• 설비공학논문집
• /
• 제16권12호
• /
• pp.1234-1268
• /
• 2004

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2002 and 2003 has been carried out. Focus has been put on current status of research in the aspect of heating, cooling, air-conditioning, ventilation, sanitation and building environment/design. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation in diverse facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat transfer, humidity was also interesting to promote comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing research topics. Well developed CFD technologies were widely applied for analysis and design of various facilities and their systems. (2) Heat transfer characteristics of enhanced finned tube heat exchangers and heat sinks were extensively investigated. Experimental studies on the boiling heat transfer, vortex generators, fluidized bed heat exchangers, and frosting and defrosting characteristics were also conducted. In addition, the numerical simulations on various heat exchangers were performed and reported to show heat transfer characteristics and performance of the heat exchanger. (3) A review of the recent studies shows that the performance analysis of heat pump have been made by various simulations and experiments. Progresses have been made specifically on the multi-type heat pump systems and other heat pump systems in which exhaust energy is utilized. The performance characteristics of heat pipe have been studied numerically and experimentally, which proves the validity of the developed simulation programs. The effect of various factors on the heat pipe performance has also been examined. Studies of the ice storage system have been focused on the operational characteristics of the system and on the basics of thermal storage materials. Researches into the phase change have been carried out steadily. Several papers deal with the cycle analysis of a few thermodynamic systems which are very useful in the field of air-conditioning and refrigeration. (4) Recent studies on refrigeration and air-conditioning systems have focused on the system performance and efficiency enhancement when new alternative refrigerants are applied. Heat transfer characteristics during evaporation and condensation are investigated for several tube shapes and new alternative refrigerants including natural refrigerants. Efficiency of various compressors and performance of new expansion devices are also dealt with for better design of refrigeration/air conditioning system. In addition to the studies related with thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out. It should be noted that the researches on two-phase flow are constantly carried out. (5) A review of the recent studies on absorption refrigeration system indicates that heat and mass transfer enhancement is the key factor in improving the system performance. Various experiments have been carried out and diverse simulation models have been presented. Study on the small scale absorption refrigeration system draws a new attention. Cooling tower was also the research object in the respect of enhancement its efficiency, and performance analysis and optimization was carried out. (6) Based on a review of recent studies on indoor thermal environment and building service systems, it is noticed that research issues have mainly focused on several innovative systems such as personal environmental modules, air-barrier type perimeterless system with UFAC, radiant floor cooling system, etc. New approaches are highlighted for improving indoor environmental conditions and minimizing energy consumption, various activities of building energy management and cost-benefit analysis for economic evaluation.