• Korean Journal of Plant Taxonomy
• /
• v.46 no.2
• /
• pp.213-246
• /
• 2016

Algific talus slopes tend to occur on steep north-facing slopes with bedrock that retains ice and emits cold air throughout the growing season. Algific talus slopes provide a suitable microclimate for disjunct or relict populations of northern plant species at low altitude habitats in temperate zones. The purpose of this study is to suggest a strategy for the comprehensive conservation of the vegetation of algific talus slopes through studies of the floristics and plant species compositions and threat factors at present and in the future of 15 major algific talus slopes in Korea. As a result, the vascular plants surveyed on 15 major algific talus slopes were recorded, with a total of 587 taxa, 109 families, 323 genera, 531 species, 7 subspecies, 47 varieties 1 form and 1 hybrid. Of them, endemic plants numbered 26 taxa, and threatened species according to the IUCN valuation basis numbered 8 taxa. Fourth (IV) and fifth (V) degree indicator species as specified by floristic subregions numbered 31 taxa. Peculiarly, several subalpine-native plant species, in this case Cystopteris fragilis, Gymnocarpium dryopteris, Huperzia selago, Rosa koreana, Vaccinium vitis-idaea and Woodsia hancockii, were distributed on algific talus slopes at 100-600 m above sea level. Numerous and diverse biological resources native to algific talus slopes in Korea have been consistently disturbed or damaged by human activities without some form of protection. An all-taxa biodiversity inventory should be surveyed to provide more information about all biological species living on algific talus slopes. In addition, conservation strategies to ensure biodiversity and effective management of algific talus slopes are discussed in detail.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.605-610
• /
• 2011

Phase holdup characteristics of relatively large and small bubbles were investigated in a three-phase(gasliquid-solid) fluidized bed of which diameter was 0.105 m(ID) and 2.5 m in height, respectively. Effects of gas(0.01~0.07 m/s) and liquid velocities(0.01~0.07 m/s) and particle size($0.5{\sim}3.0{\times}10^{-3}m$) on the holdups of relatively large and small bubbles were determined. The holdups of two kinds of bubbles in three phase fluidized beds were estimated by means of static pressure drop method with the knowledge of pressure drops corresponding to each kind of bubble, respectively, which were obtained by dynamic gas disengagement method. Dried and filtered air which was regulated by gas regulator, tap water and glass bead of which density was $2500kg/m^3$ were served as a gas, a liquid and a fluidized solid phase, respectively. The two kinds of bubbles in three-phase fluidized beds, relatively large and small bubbles, were effectively detected and distinguished by measuring the pressure drop variation after stopping the gas and liquid flow into the column as a step function: The increase slope of pressure drop with a variation of elapsed time was quite different from each other. It was found that the holdup of relatively large bubbles increased with increasing gas velocity but decreased with liquid velocity. However, the holdup showed a local minimum with a variation of size of fluidized solid particles. The holdup of relatively small bubbles increased with an increase in the gas velocity or solid particle size, while it decreased slightly with an increase in the liquid velocity. The holdups of two kinds of bubbles were well correlated in terms of operating variables within this experimental conditions, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.1
• /
• pp.28-33
• /
• 2016

Batteries are used for main power engine in the fields such as mobiles, electric vehicles and unmanned submarines, for starter and lamp driver in general automotive, for emergency electric source in ship. These days, lead-acid and the lithium ion batteries are increasingly used in the fields of the secondary battery, and the lead-acid battery has a low price and safety comparatively, The lithium ion battery has a high energy density, excellent output characteristics and long life, whereas it has the risk of explosion by reacting with moisture in the air. But Recently, due to the development of waterproof, fireproof, dustproof technology, lithium batteries are widely used, particularly, because their usages are getting wider enough to be used as a power source for hybrid ship and electric propulsion ship, it is necessary to manage more strictly. Hybrid ship has power supply units connected to the packets to produce more than 500kWh large power source, and therefore, A number of the communication modules and wires need to implement the wire inspection and monitor system(WIIMS) that allows monitoring server to transmit detecting voltage, current and temperature data, which is required for the management of the batteries. This paper implements a low price type wireless inspection and monitoring system(WILIMS) of the lithium ion battery for hybrid vessels using BLE wireless communication modules and power line modem( PLM), which have the advantages of low price, no electric lines compared to serial communication inspection systems(SCIS). There are state of charge(SOC), state of health(SOH) in inspection parts of batteries, and proposed system will be able to prevent safety accidents because it allows us to predict life time and make a preventive maintenance by checking them at regular intervals.

• Journal of Mushroom
• /
• v.8 no.3
• /
• pp.122-130
• /
• 2010

Common mushroom production per area has been decreased and are up to less than 50% of the 1980 production. To determine the main reasons for the decrement, we performed this study. Two main reasons, which are mushroom disease and the low compost quality because of mechanized compost making, were assessed. In mechanized mushroom farms, nitrogen concentration in compost was lower than recommended and total compost quantity was about 100-150 $kg/3.3m^2$, which was also lower than usual. Our study revealed that higher nitrogen concentration (about 1.5%) in compost gave better production. Also, use of large amount of compost appeared to increase the mushroom production, although more insects and disease problems were observed. The relationships between the presences of microorganisms and occurrence of diseases were assessed by monitoring the microorganism densities near the mushroom farms. Higher number of microorganisms were observed near the mushroom farm area, compared to control region, Daechon beach. Most contaminating molds were found in the circulating fans, tunnel and culture room floor. The bacterial isolates were collected from the air in mushroom culture room and killed with 0.005% Benzalkonium solution, indicating treatment of Benzalkonium are the effective methods to sanitize the mushroom culture room.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.18
• /
• pp.28-53
• /
• 1975

Experiments on the physiological root activity and its related characteristics of rice varieties were carried out in order to obtain some basic informations for the application of the results obtained to a rice breeding program. A significant positive correlation was found not only among the various characteristics related to conducting and ventilating systems which connects top and root of rice plant, but also between these characteristics and root activity. On the other hand, a significant difference in physiological root activity was recognized among different varieties and also between different groups of recognized 7 rice varieties differing in the their origin. It was also found that varieties with higher root activity (root activity indices) after ear formation stage tended to have more number of lower green leaves and consequently resulted in higher grain yield. Therefore, it may be possible to diagnose indirectly the root activity by examining the number of green leaves of the rice plant at later growth stage when breeders make selections of parent material for crossing or of hybrid lines in pedigree nurseries.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.345-359
• /
• 2002

The purpose of the study was to provide the fundamental data to instruct athletes through the analysis athletes' movement in javelin. Three athletes in the level of national representative were participated in this study. The study analyzed kinematic variables(lead foot and releasing javelin) through 3-D analysis and obtained the following results. 1. During withdrawal, it is important to maintain of running horizontal velocity. 2. It was showed that throng average height was $84{\pm}3.3%$ and javelin adequative degree, Among the athletes, $S_2$ who had the best record was released the javelin with the fast velocity, but throw the javelin with the less releasing velocity. 3. $S_2$ released after lead foot were completely landed and therefore it is no problem in a kinematic aspect. However, $S_1$ angle was too small. it caused increase of release velocity to be prevented. 4. $S_2$ showing the best result indicated shorter in duration time. Generally, the shorter duration time in release phase showed the longer release distance. Especially $S_1$ and $S_3$ showing the worse result indicated the longer duration time in preparatory phase, causing the breakup of force. Therefore to improve the record, it should be decreased the duration time in preparatory phase. 5. Compared with $S_1$ and $S_3$, $S_2$ showing the best record indicated the higher velocity in center of mass, trunk, upper arm, lower arm and hand That is the higher velocity of upper arm at release leaded the better velocity transfer from upper arm to following lower arm and hand, these action should be considered to be helpful of better record. According to the above conclusion, when the athletic leaders cauch athletes, they should focus on maintaining knee angle, upper body and hip angle in a previous stage of release and throwing angle, throwing height, throwing velocity in a release stage.

• Korean Security Journal
• /
• no.13
• /
• pp.423-449
• /
• 2007

This research is to investigate the detention facilities of police stations and their real operations through the perceptions of detainees at police station cells and to present the policy suggestions for them. To fulfill the research, a questionnaire was made out on the basis of 'the Regulation on Detention and Escort for Suspects'. 'the Regulation on a Standard Plan for Detention Facilities' and 'the Regulation on the Lowest Standard to Treat Detainees' ; and detainees at 23 police station cells under the jurisdiction of Kyungbuk Local Police Agency were asked to answer it. Policy suggestions following from the result of the investigation of detainees' perceptions of the detention facilities of the police stations are as follows; Firstly, the structure of police station cells should be arranged in straight lines in order to take their human rights into consideration and more detention facilities are needed to be built in order to separate male, female, handicapped and juvenile inmates. Secondly, shower rooms and washrooms outside the cells should always be open to detainees whenever they need to be used. Thirdly, any detention facilities deficient in fire fighting equipment should have exit doors installed as soon as possible in case of an emergency and provide sufficient fire extinguishers considering the number of detainees and the size of the facilities. Fourthly, the detention facilities should have sufficient windows for ventilation and take necessary measures to obtain natural lighting instead of electric lighting. Fifthly, air conditioners should be equipped properly taking account of the number of detainees and the dimensions of the facilities. Policy suggestions according to the result of the investigation of detainees' perceptions of the operation of detention facilities of police stations are as follows; Firstly, the problem of operating the detention facilities must deal with worn-out facilities and measures to secure the budget should be taken as soon as possible. Secondly, considering that most detained suspects have difficulties in livelihood, daily necessaries must be issued to them. Thirdly, personal belongings deposited by inmates must be properly managed with the same documentation throughout the police station detention facilities. The number of female guards to take exclusive charge of the physical checkups and processing of female detainees should be increased. Also the facilities for handicapped detainees must be expanded, improved and managed properly. Fourthly, except for handcuffs and ropes to bind detainees in the detention facilities, helmets to prevent self-harm must be withdrawn. The budget to improve the quality of meal issued by the government must be urgently secured and the price of private food sent to detainees must be readjusted to be in line with the consumer price. Health and medical care and sanitation for detainees must be substantial, and also sunbathing and outdoor exercises should be allowed to detainees.

• Journal of Korean Ophthalmic Optics Society
• /
• v.16 no.2
• /
• pp.201-207
• /
• 2011

Purpose: This study was to find out the influence on eyes of indoor air quality in college students taking course, such as Sick-building syndrome symptoms and effects on the eye in new-built university buildings. Methods: We selected a new building in a university located in Metro Seoul and college students in a department for the study. The number of total participants was 33, to whom questionnaire surveys were conducted in advance to check individual traits (gender, age, whether to smoke, whether to wear contact lenses, or whether to drink). The first questionnaire surveys and checking of ocular symptoms to first indoor hazardous materials were conducted in October and two months later the second surveys and checking were carried out in December. The indoor air quality was measured when conducting the first questionnaire surveys and the second questionnaire surveys; especially measurements of gaseous materials such as aldehydes and VOCs in the indoor air were conducted. Results: Indoor air quality of the new building was as follows: formaldehyde level was 22.90 ${\mu}g/m^3$ in the first measurement and 16.79 ${\mu}g/m^3$ in the second measurement. In addition, most materials showed higher value in the first measurement. The level of TVOC was statistically significant (p<0.05) decreased on 448.54 ${\mu}g/m^3$ in the first and 62.55 ${\mu}g/m^3$ in the second. In clinical assessments to check ocular symptoms caused by eye irritations, dry eye syndrome was found in the first and second exposures. When comparing the first and second assessments, dry eyes deteriorated in the morning of the second attempt compared to the first one. Conclusions: In the survey of ocular symptoms and the measurement of indoor air quality, the level of formaldehyde was measured higher in the second attempt than the first; thus, it was confirmed the influence of indoor air quality in a new building upon ocular symptoms of occupants.

• Clinical and Experimental Pediatrics
• /
• v.48 no.5
• /
• pp.488-494
• /
• 2005

Purpose : To outline the aspects of extubation by birth weight and find the predictors for success/failure at the first extubation in extremely low birth weight infants. Methods : One hundred thirteen extremely low birth weight infants(<1,000 g) who were admitted to NICU at Samsung Seoul Hospital between Jan. 2000 and Jun. 2004 were enrolled. Clinical characteristics that are thought to be related with extubation success or failure were compared with the success and the failure of the first extubation. Results : As the birth weight decreased, extubation success day was significantly delayed : $16{\pm}3day(d)$ in 900-999 g; $20{\pm}3d$ in 800-899 g; $35{\pm}4d$ in 700-799 g; $37{\pm}9d$ in 600-699 g; $49{\pm}12d$ in ${\leq}599g$. 25 out of 113 infants(22%) failed the first extubation. Preterm premature rupture of membrane was associated with extubation success, and air leak was associated with extubation failure, with a borderline significance. Postnatal and corrected age and body weight at the first extubation, nutritional status, and ventilator settings were not associated with extubation success or failure. Extubation success day was significantly delayed, and the incidence of late-onset sepsis and mortality was significant higher in the failure of the first extubation. Conclusion : We could not find significant predictors for success/failure at the first extubation. The failure of the first extubation had an increased risk of late-onset sepsis and death. Further studies are needed to find the predictors for extubation success/failure.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.1
• /
• pp.23-30
• /
• 2007

The ultimate objective of this study is to develop oxygen-enriched combustion techniques applicable to the system of practical industrial boiler. To this end the combustion characteristics of lab-scale LNG combustor were investigated as a first step using the method of numerical simulation by analyzing the flame characteristics and pollutant emission behaviour as a function of oxygen enrichment level. Several useful conclusions could be drawn based on this study. First of all, the increase of oxygen enrichment level instead of air caused long and thin flame called laminar flame feature. This was in good agreement with experimental results appeared in open literature and explained by the effect of the decrease of turbulent mixing due to the decrease of absolute amount of oxidizer flow rate by the absence of the nitrogen species. Further, as expected, oxygen enrichment increased the flame temperatures to a significant level together with concentrations of $CO_2$ and $H_2O$ species because of the elimination of the heat sink and dilution effects by the presence of $N_2$ inert gas. However, the increased flame temperature with $O_2$ enriched air showed the high possibility of the generation of thermal $NO_x$ if nitrogen species were present. In order to remedy the problem caused by the oxygen-enriched combustion, the appropriate amount of recirculation $CO_2$ gas was desirable to enhance the turbulent mixing and thereby flame stability and further optimum determination of operational conditions were necessary. For example, the adjustment of burner with swirl angle of $30\sim45^{\circ}$ increased the combustion efficiency of LNG fuel and simultaneously dropped the $NO_x$ formation.