• Title/Summary/Keyword: 공급 밸브

Search Result 229, Processing Time 0.037 seconds

우주발사체에 적용되는 지상 엄브리칼 체결장치의 구성과 기능

  • Kim, Yong-Uk;Kim, Dae-Rae;Lee, Jeong-Ho;O, Seung-Hyeop
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.37 no.2
    • /
    • pp.151.1-151.1
    • /
    • 2012
  • 우주발사체와 발사지원설비를 연결하여 추진제 공급과 전기신호 송수신 등을 가능하게 하는 메커니즘을 엄브리칼 장치라고 한다. 국내 우주발사체의 경우 액체산소와 케로신을 추진제로 사용하며, 질소, 공기 및 헬륨 등의 가스를 밸브구동, 공간 퍼지, 추진제 가압에 이용한다. 본 논문에서는 우주센터의 발사대설비에 적용된 엄브리칼 장치 중 추진제 및 고압가스 공급을 위한 자동체결장치(auto coupling device)의 구성, 기능 및 발사 준비를 위한 프로세스에 대해 기술하고 있다. 자동체결장치는 발사체 하부 두 곳에 연결되며, 산화제 공급측의 체결장치(coupling device 1)와 연료 공급측의 체결장치(CD 2)로 구성된다. 이 장치는 발사체와의 접촉면에서 기밀을 확보한 상태에서 내부의 탱크, 밸브, 인터스테이지 등에 추진제 및 각종 가스를 공급하는 통로역할을 하며, 발사준비가 완료된 후에는 발사체 이륙 전 또는 이륙과 동시에 발사체로부터 자동으로 분리된다. 각각의 체결장치 구성품으로는 발사체 이륙시 발생하는 고온의 화염으로부터 장치를 보호하는 PD(protective device), 접촉면에 기밀을 제공하고 추진제 누출을 방지는 MCP(multi-channel plate), 접촉면을 보호하기 위한 덮게, 각종 연결 배관의 전진과 후진을 위한 캐리지, 발사체와의 체결을 지지하는 그립 등이 있다. 발사 준비를 위해서 사전에 장치의 독립운용시험을 통해 각 구성품의 상태와 기능을 점검하고 장치의 작동성을 검증한다. 이후 발사체를 모사하는 기체 및 관제설비와 종합적으로 연계 시험과 모사시험을 수행하여 최종적으로 발사준비상태를 확인하게 된다. 이러한 자동체결장치의 운용 경험은 한국형발사체의 지상지원설비 개발에 활용할 수 있을 것이다.

  • PDF

Introduction of Thrust Vector Control System and Control Valve Development for Space Launch Vehicles (우주발사체용 추력벡터제어 시스템 및 제어밸브류 개발 현황 소개)

  • Lee, Je-Dong;Park, Bong-Kyo;Park, Ho-Youl;Kim, Sang-Beom;Jun, Pil-Sun;Jang, Ki-Won
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2009.11a
    • /
    • pp.613-615
    • /
    • 2009
  • This paper is to introduce Hanwha Aerospace R&D Center's development status of TVC(Thrust Vector Control) system and control valves for Korean space launch vehicles. With the successful development of KSR-III TVC system, Hanwha have developed TVC system and RCS control valves for KSLV-I. Also, in the advance research area of KSLV-II, Hanwha have participated in LOx and fuel flow control valves and LOx shut-off valve development in the engine supply system. Based on the accumulated experiences and technologies in the aerospace key components and system development, Hanwha will make an important contribution to KSLV-II development in the future.

  • PDF

Development of Photograph/Inspect Techniques in the Distribution System and Maintenance and Repair of Valve without Suspension of Water Supply (부단수 상수도관로 내시 진단 및 밸브 유지 관리 기술 개발)

  • Park, Sang-Bong;Lee, Kyung-Sob;Oh, Kyung-Seok;Kim, Dong-Hyun;Park, Hyuk-Sung
    • Proceedings of the KAIS Fall Conference
    • /
    • 2009.12a
    • /
    • pp.88-92
    • /
    • 2009
  • 본 연구에서는 상수관로 보수 작업시 필연적으로 수행하던 단수 작업을 배제 하고 단수 없이 시행 가능한 관로 내시 진단 장치와 밸브류의 유지 보수 및 성능 개선을 위한 부단수 밸브 그랜드 패킹 교체장치, 부단수 밸브 스케일 제거 장치, 부단수 밸브 교체 장치를 개발함으로써 단수에 따른 시민 불편 및 경제적 손실을 저감하고 연속적인 물공급에 대한 신뢰도를 향상시킬 수 있으며, 누수 사고시 신속한 대처로 유수율 향상에 기여 할 수 있다. 또한, 관로의 내부를 직접 육안에 의해 관찰함으로써 해당 관로의 세척, 교체 등 정확한 보수 방법을 선정할 수 있으며, 정기적인 관 내부상태 확인을 통하여 노후도 평가의 직접진단 데이터로 활용 할 수 있다.

  • PDF

A Development of Solenoid Valve for Satellite Propulsion System (위성추진시스템 솔레노이드 밸브 개발)

  • Kim, Kyung-Sik;Baek, Ki-Bong;Park, Eun-Joo;Cho, Seung-Hwan;Kim, Su-Gyeom
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2011.11a
    • /
    • pp.456-459
    • /
    • 2011
  • The Dual-type Solenoid Valve was developed for a domestic production of a fuel-supply valve on the satellite attitude control thruster system. The satellite valve using a hydrazine as a fuel must fulfill the cycle life, shock, vibration and the environment of an extremely low temperature In addition to the basic performance of the response time, mass flow and leakage etc.. in this paper, the design, production and performance experiment using the nitrogen pneumatic equipment were conducted.

  • PDF

Development of Water Supply Technology Using Smart Rainwater Storage (스마트 빗물저류조 활용 용수공급 기술 개발)

  • Maeng, Seung Jin;Kim, Da Ye;Park, In Sung;Park, Hyung Keun;Seo, Sung Chul
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2022.05a
    • /
    • pp.336-336
    • /
    • 2022
  • 빗물자원의 대부분은 바다로 유입되어 소모되거나, 하수로 유입되어 불필요한 고도처리 공정이 진행되고, 하수처리장 용량에 과부하를 발생시키는 등 막대한 예산이 투입되고 있는 실정이다. 갈수기시 농가에서 용수를 확보하기 위한 용수 운반장치 등 기반구축이 쉽지 않으며, 인력 부족으로 정상적인 용수공급에 어려움을 겪고 있다. 이에 빗물자원을 용수로서 효율적으로 활용하기 위한 시스템의 구축이 필요하다. 본 연구는 빗물저류조에 스마트 관수제어 시스템을 적용한 것으로 지중에 설치된 토양수분 센서와 저류조 내부의 수위 센서에서 관측된 데이터를 토대로 자동으로 지중에 수분을 공급하는 시설이다. 지중에 수분이 부족할 경우 밸브를 열어 자동으로 펌프를 가동시켜 저류조 내부의 물을 지중으로 공급시키며 지중의 수분이 충분하거나 저류조 내부의 물이 부족해질 경우 밸브를 닫아 공급을 중단하도록 한다. 또한 저류조의 수위와 토양의 수분량, 펌프의 작동여부 등은 앱을 이용하여 실시간으로 확인이 가능하며, 스마트폰 앱을 이용한 수동조작 또한 가능하다. 본 기술은 집수, 저류, 공급, 통신, 제어, 센서 총 6종의 모듈로 구성되어 있으며, 사용자의 환경 및 예산의 따라 집수, 저류, 공급 모듈 등 맞춤형 제품 구성이 가능하도록 개발하였다. 저류조의 물공급을 관리, 제어하는 시스템으로 센서로부터 전송받은 데이터를 기준으로 펌프를 작동시켜 수분공급을 제어할 수 있으며 해당 기록을 서버에 저장하여 데이터의 통계를 구할 수 있도록 하였다. 사용자가 앱을 통하여 직접적인 제어 및 가동환경에 대한 설정을 할 수 있어 사용자가 직접 현장에 오지 않아도 토지의 현황과 저류조의 수위, 수분 공급상황 등을 직접 제어할 수 있도록 개발하였다.

  • PDF

Defining Flushing Path and Priority for Flushing Operation (플러싱공법을 위한 세척구역 및 순서 결정방안)

  • Gim, A Rin;Jo, Yeong Bin;Ha, Jeong Tae;Kim, Jin Hyeok;Jun, Hwan Don
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2020.06a
    • /
    • pp.239-239
    • /
    • 2020
  • 상수관망은 수용가에게 용수를 공급하는 사회기반시설물로, 용수를 공급하는 과정에서 관내에 이물질, 스케일 등의 생성은 불가피하다. 관로 변경, 단수로 인한 비상시 용수 공급 등의 유향 및 유속이 변화가 발생할 경우 스케일이 박리되어 적수사고 등의 수질문제가 발생 할 수 있으며, 이에 사전에 스케일을 제거 할 필요성이 있다. 스케일을 제거하기 위해서는 주기적인 관세척이 필요하며, 대표적인 공법으로는 플러싱공법이 있다. 현재까지 플러싱공법에 대한 연구는 실험을 통한 적용 권장 기준으로 진행되어 왔으나, 실제 상수관망에서 적용권장 기준을 확보하기 위한 방안에 대한 연구는 미흡한 실정이다. 플러싱공법의 대표적은 종류는 재래식 플러싱공법과 단방향 플러싱공법이 있다. 재래식 플러싱공법은 제수밸브를 조작하지 않는 방법으로, 모든 소화전에서 용수를 방출하는 공법이다. 단방향 플러싱공법은 제수밸브를 조작하여, 일정한 방향으로 요수를 방출하는 공법이다. 단방향 플러싱공법은 재래식 플러싱공법보다 유속확보 측면에서 유리하여 관로 세척을 위한 유량 및 유속 확보가 용이하다. 단방향 플러싱공법을 적용하기 위해서는 관로의 유속을 확보하기 위해 세척구역 정의하는 것이 필요하다. 이에 본 연구에서는 세척구역 정의를 통한 플러싱공법 적용 방안을 제안하고자 한다. 세척구역은 크게 3단계로 구분한다. 먼저 블록단위의 세척순서를 결정하고, 블록 내 관망 세척구역을 결정한다. 이때 관로의 관경, 곡선구간, 세척구역의 길이를 고려하여 세척구역을 정의한다. 마지막으로 결정된 세척구역을 제수밸브의 위치, 조작 횟수에 근거하여 세척순서를 결정한다. 본 연구를 통해 실제 상수관망 플러싱공법 적용 절차 수립에 기여할 수 있다.

  • PDF

On the Force Balance of a Main Oxidizer Shutoff Valve (산화제 개폐밸브의 힘평형에 관한 연구)

  • Hong, Moon-Geun;Lee, Soo-Yong
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2008.05a
    • /
    • pp.14-17
    • /
    • 2008
  • A poppet type shutoff valve under the pneumatic control has been adapted for the MOV (Main Oxidizer shutoff Valve) for KSLV (Korea Space Launch Vehicle). The MOV controls the supply of liquid oxygen into the combustion chamber just by opening and shutting operations. The poppet part of the poppet valves is usually connected with the piston, but on the other hand that of the MOV is separated and just contacted with the piston in order to secure the flexibility of the valve design. For the prevention of the collision with valve body by an undesirable movement of the piston part, it is necessary to evaluate the force during the valve closing. The analysis of the force balance of the MOV at the moment of the valve closing have been performed and some important design parameters for the force balance control have been introduced.

  • PDF

Changes in The Pressure-Flow Control Characteristics of Shunt Valves by Intracranial Pressure Pulsation (뇌압 펄스에 의한 션트밸브의 압력-유량제어 특성의 변화)

  • 홍이송;이종선;장종윤
    • Journal of Biomedical Engineering Research
    • /
    • v.23 no.5
    • /
    • pp.391-395
    • /
    • 2002
  • Shunt valves used to treat patient with hydrocephalus were numerically simulated to investigate influence of pressure pulsation on their flow control characteristics. We modeled flow orifice through the shunt valve and imposed pulsating pressure and valve diaphragm movement to compute flow through the valve. The results of our study indicated that flow rates increased more than 40% by introducing pressure pulsation and diaphragm movement on the shunt valve. Our results demonstrate the pressure-flow control characteristics of shunt valves implanted above human brain may be quite different from those obtained by syringe pump test just after manufacture that induces uniform pressure.

Experimental Investigation on Cracks and Defects of a Valve Sealing Components for a LPG Cylinder (LPG 용기용 밸브의 밀봉부품 크랙 및 결함에 관한 실험적 고찰)

  • Kim, Chung-Kyun;Lee, Byung-Kwan;Kim, Tae-Hwan
    • Journal of the Korean Institute of Gas
    • /
    • v.11 no.1 s.34
    • /
    • pp.23-28
    • /
    • 2007
  • This paper presents an experimental investigation on the sealing defects and cracks of O-rings and a valve packing of a gas valve for a LPG cylinder. O-ring in which stops a gas leakage of a liquefied petroleum gas is very important for a LPG valve safety. Valve packing is to open and close a gas flow port for supplying and charging a LPG fuel. The sealing performance of two sealing units ism related to the leak safety and long lift of a gas valve. The investigated results show that most of O-rings was failed due to a circumferential crack in which is caused by partial press bonding failure near the partition zone and an excess compression rate. Some of the O-ring failure was originated by an extrusion of an excessive leak pressure of a LP gas. Thus, this paper strongly recommends a tight quality control and a safety guarantee system of O-rings and valve packing to guarantee a leak safety and to extend a service lift of a gas valve. At the end, a warranty policy of the sealing units should be adopted for increasing a product quality and safety of a gas valve.

  • PDF