• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.216-222
• /
• 1992

현재의 가공 시스템에 있어서 가공 작업자체는 NC 공작기계, 머시닝 센터등에의해 자동적으로이루어 지고있으나, 작업 상태에 대한 감시 및 공구교환 시기의 결정은 주로 숙련된 작업자에 의해이루어 지고 있으므로완전 자동화, 무 인화에 큰장애가 되고 있다. 특히 공구 파손 및 공구 마멸에 대한 감시는 공구 교환 시점의 자동결정 뿐 아니라 가공 시스템의 무인 운전을 위해서 필수적인 것으로, 기계 정지 시간(down time)을 줄일 수 있고, 제품의 정밀도를 높일 수 있다. 본 연구에서는 이를 위한 기초 연구로, 가공상태를 나타내는 감시신호로 AC 주축 모터 전류와 주축대진동 신호 를 선정하여 엔드밀 공구와 드릴 공구를 이용한 작업에서의 공구 상태변화에 따른 감시신호의 성능을 조사하였다.

• Journal of the KSME
• /
• v.30 no.1
• /
• pp.36-41
• /
• 1990

절삭공구의 발달사 및 최근 개발동향에 대하여 살펴보았다. 현재 기계공업에 관련된 생산공정중 많은 부분을 절삭가공이 담당하고 있으며, 절삭가공시 중요한 역할을 하는 절삭공구는 소량의 마 멸 또는 파손에 의하여 사용이 불가하여 교체된다는 것을 생각할 때, 절삭공구의 세계 시장규모 가 매우 클 것이라는 것에 쉽사리 짐작될 수 있다. 그 뿐만 아니라 채광공구, 금형다이와 공구, 내마멸재 등에도 절삭공구재가 응용된다는 것을 고려하면 그 수요는 엄청난 것이다. 그런데 이 분야에서 우리나라의 수준은 선진국과 비교할 때 크게 뒤떨어져 있으며 그 격차 또한 점점 더 벌어지고 있는 실정이다. 그러므로 앞에서 살펴본 바와 같이 오랜기간 축적되어온 그들의 기술 수준을 따라 잡기 위해서는 관련 기술에 대한 연구 및 기술축적에 대하여 업계 및 학계의 부단한 노력이 요구된다고 하겠다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.471-477
• /
• 2012

SCM420 steel tempered after performing gear hove PACVD carbide coating on the surface after the cutting surface hardness was high. Difficult-to-cut, without coating is classified as mild as large, including materials like mild, high strength that improves tool life and productivity have limited availability. Drive to improve it in the TiCN-coated carbide call for war to the finish coating on cutting a hob skiving good workability, tool wear less, 2.5-fold increase in tool life results were obtained. Experiments using CNC Skiving hobbing machine with wet cutting conditions, cutting speed and feed rate to apply a variety of the tool wear and surface roughness data were obtained. Results from condition 2 (V = 200m/min F = 0.7mm/rev) cutting speed feed mark the cutting surface microstructure and surface roughness Rmax $4.7{\mu}m$(Ra $1.19{\mu}m$) of the data was obtained.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.211-211
• /
• 2009

높은 이온화율과 복잡한 형상의 모재에도 표면 도포성 및 균일성을 나타내는 아크이온플래이팅 기술과 비전도성 세라믹 타겟물질에 적용가능한 스퍼터링 기술이 결합된 하이브리드 코팅 시스템(Hybrid coating system)을 이용하였다. 그리고 Cr-Al-N과 Cr-Si-N 코팅막의 강화 기구를 복합시킨 새로운 개념의 Cr-Al-Si-N 코팅막을 초경(WC-Co)시험편에 증착하여 Si 첨가량에 따른 미세구조의 미세경도 특성을 파악하였다. 공구성능 평가는 고속가공조건하에 마이크로 밀링기에서 무코팅(초경공구), Cr-Al-Si-N (Si : 0, 4.5, 8.7, 16 at.%) 코팅 마이크로엔드밀에 대하여 공구마멸에 대한 공구수명을 비교, 평가하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.59-64
• /
• 2002

Recently the applications of high speed machining are increasing due to the need for high performance and high accuracy machining and machining for difficult-to-cut material. However, the high speed machining also accompanies some problems: the product quality can be degraded due to the tool wear and the product cast can go up due to frequent tool replacements. Therefore, it is necessary to develop a technique of quantitative tool wear measurement to determine the precise timing for tool replacement. In this respect, this study suggests a reliable technique far the reduction of error components by developing a system using a CCD camera and an exclusive jig to be able to precisely measure the size of tool wear in flat end mill for high speed machining.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.1
• /
• pp.39-46
• /
• 2005

In this study, unsintered, presintered and full-sintered low purity alumina ceramics were machined with various tools to clarify the machinability and the optimum cutting conditions. The main conclusions obtained were as follows. (1) Machined with alloy steel tool, the machinability of the presintered ceramics becomes better with the decrease of presintering temperature, but that of unsintered ceramics(white body) was extremely poor. (2) In the case of carbide, K01, the tool life in machining the white body was the longest, and the machinability of presintered ceramics becomes poorer with the increase of the presintering temperature. (3) The K01 tools exhibit longer life than the P10 tools in machining both the white body and the ceramics presintered at $1450^\circC$ or higher temperatures, but the P10 tools shows longer tool life than the K10 tools in machining of the ceramics presintered at temperatures below $1450^\circC$.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.2
• /
• pp.10-17
• /
• 2001

Drilling is one of the most important operations performed in the machining industry. And the material of the workpiece has a profound effect on the tool life, the surface finish produced and the overall economy of the process. Hot-rolled high strength steels have been used for automobile structural material, owing to high hardness and machinability of the material. However, in the drilling of hot-rolled high strength steels, the current knowledge of tool wear and machinability are insuf-ficient. There, it is desirable to monitor drill wear status and hole quality changes during the hole drilling process. Accordingly, this paper deals with the cutting characteristics of the hot-rolled high strength steels using common HSS drill. The performance variables include the drilling thrust, torque and drill wear data obtained from drilling experiments con-ducted on the workpiece. Also drill were is measured by acoustic emission system and computer vision system.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.3
• /
• pp.15-21
• /
• 1996

This study is focused on the prediction of appropriate tool life by clarifying the correlation between progressive tool wear and AE(Acoustic Emission) signals, while cutting stainless steel by end mill on the machining center. The results of this study were that RMSAE tends to increase linearly along with the increase of the cutting speed, and it was more sensitive to depth of cut than to the variation of feed rate at the same cutting conditions, and RMSAE increases around 0.21mm flank wear hereby AE-HIT also increases. AE signals depend upon tool wear and fracture from the above results. Therefore, the AE signals can be utilized in order to monitor the tool condition.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.6
• /
• pp.1290-1295
• /
• 1988

Theoretical considerations in the development of new cutting tool materials for high speed machining is presented. The progressive wear of cutting tools is assumed to consist of the abrasive and solution components as major modes. Theoretical calculations of relative wear rates between various tool materials based on the two modes are possible using their hardness and solubility data. Assuming cementite as the major hard particles in machining steels, relative wear rates of possible tool materials were calculated. The results indicate that $Al_{2}$O$_{3}$ in oxides, HfN in nitrides and HfC in carbides are the optimal tool materials from the view point of mechanical and thermochemical wear resistance. And several methods for improving the fracture toughness of the above tool materials are suggested.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.101-104
• /
• 1995

A acoustic emission (AE) sensor has been used to monitor tool were during milling process. The relation between tool wear and AE RMS (Root mean Square) signal was investigated experimentally. A avaliable monitoring index for monitoring toolwear was newly extracted form AE RMS. And on-line monitoring program was developed. The proposed monitoring system has verified experimentally by roughing end milling titanium alloy with TIN coated HSS tool.