• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.04a
• /
• pp.438-442
• /
• 1994

절삭가공에서 공구의 마멸은 생산의 최적화에 영향을 주는 가장 중요한 요소중의 하나라고할 수 있다. 따라서 생산시스템이 자동화되고 유연성 및 생산성이 증대되면서, 공구의 수명이 끝났을 때의 공구교환을 위한 최적 의사 결정전략(Decision making stratagy)은 그 중요성이 점차 커지고 있다. 한편, 공구는 마멸의 진행에 따라 그 수명을 예측하여 교환해 주는 것이 바람직하다. 그러나 공구의 마멸은 여러가지 요인들의 복합적 작용에의해 발생하는 현상 이므로 그것을 정확히 예측한다는 것은 많은 어려움이 있다. 본 연구에서는 절삭력을 이용하여 공구의 여유면마멸 (Flank wear)과 경사면마멸을 감지하고자 한다 먼저 절삭력을 정적인 성분(Static component)과 동적인 성분(Dynamic component)로 구분하여 공구의 마멸을 감지하는데 이용하였다. 절삭력의 정적인 성분은 절삭조건의 변화에 대해 정규 화된(Normalized) 절삭력으로 모델링하여 공구의 여유면 마멸을 감지 하였다. 또한 공구의 경사면마멸이 발생한 경우에는 절삭력의 동적인 성분이 크게 변화함을 알 수 있었다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.15-20
• /
• 2004

Inclined surface milling in the mould and die industries is one of the most commonly needed cutting process. For the variety and complexity of cutting characteristics in various cutting condition, it is difficult to select a optimal tool path orientation. The comparative results through FFT analysis in this study provide a guideline for the selection tool path orientation.

• Journal of the KSME
• /
• v.30 no.4
• /
• pp.367-373
• /
• 1990

초정밀 절삭용 다이아몬드 공구의 날끝 형상에 관해서는 여러 가지 설계안이 개발되어 제각기 성공적으로 사용되고 있지만 제품 품질의 균일성, 즉 성능과 수명의 차이는 아직까지 미해결이다. 또한, 초정밀공구의 날끝 능선에 관해서 최근 측정 데이터가 발표되고 있으나, 양호한 날끝능선, 불량한 능선 및 소정의 다듬질이 이루어지지 못하고 수명에 달해버린 능선 등에 대한 제각기의 형상, 구조 등이 밝혀지지 않고 있으며, 공구의 제작법을 개발하는 것은 금후의 연구과제로 남 아있다. 그리고, 단결정 바이트의 연마에 대해서는 많은 기술적인 진전이 이루어져 왔으나, 수 명의 차이는 해결하지 못하고 있다. 이는 날끝능선의 연마방향과 더불어 다이아몬드의 이방성, 원석의 품질 등과 관련이 있다고 볼 수 있다. 공구의 마멸과정이 결정방위에 의존하는 것은 당연하겠지만, 공구의 연마가공에서는 이방성 그 자체가 공구마멸에 나타나는 문제 및 경사면과 여유면의 마멸과 달리 예리한 인선을 둔화시키는 날끝 능선의 마멸은 어떻게 진행되는가가 문 제이며, 공구의 결정방위와 성능, 수명과의 관련은 실험적으로 해명되어야 할 것이다. 또한 재 료인 다이아몬드 원석에 있어서도, 커다란 결함이 발견된 것은 제외되지만 극히 경미한 결함은 어디까지 허용될 것인지가 문제이다. 내부응력, 착색 등 결함의 인자는 다양하지만 제각기 공구 의 성능 및 수명과의 관련은 명확하게 밝혀져 있지 않다. 이러한 인자 중에서도 어느 것이 가장 크게 영향을 미치는지 확인된다면 커다란 진보가 이루어질 것으로 기대된다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.2
• /
• pp.137-143
• /
• 1999

The study of the high speed machining of inclined plane using ball end mill is performed. The use of ball end mill is rapidly growing in die and mold manufacturing. The cutting characteristics, such as cuttin g force, surface roughness and surface profile, are varied according to the variation of cutting directions. Free surface is cut using ball end mill, the surface profile is greatly varied depending upon the cutting direction. So this study will deal with the characteristics of cutting such as cutting efficiency according to the inclined plane of the workpiece, the cutting force according to tool path, surface profile and the roughness of surface. The optimal cutting direction to be applied the cutting for 3-D sculptured surfaces can be show through the results of this study.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.05a
• /
• pp.240-244
• /
• 1999

This paper deals with the establishment of the cutting direction on inclined plane by using ball end mill. Ball-end milling is widely used for free form surface die and mold. In these machining, the cutting parts vary because the tool tip is hemisphere shaped. The cutting characteristics, such as cutting force, surface roughness and surface profile are varied according to the variation of cutting directions. The effective tool diameter was calculated on different tilt angles and tool-path. Tool life and cutting characteristics were estimated on variation of cutting directions in the same cutting speed. In this paper, the optimal cutting direction which can be applied 3-D sculpture surface cutting is suggested.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.5
• /
• pp.401-407
• /
• 1984

In the previous paper, part I, the principal stresses were investigated on the normal tools and the workpieces whose materials were the same epoxy resin. In this paper, are measured and compared the stresses on the normal tools and restricted tools which have three various rake angles. Each restricted tool above has the same restricted angle. The workpieces used in this experiment are made of high quality lead. The photoelastic measuring device is attached to the saddle of the lathe and carried at the same speed as the cutting tool is feeded. The results obtained are summarized as follows; The shear stresses on the tip of the restricted tools of the rake angle .alpha.=12.deg. and .alpha.=0.deg. are less than those of normal tools. But, for the rake angle .alpha.=-12.deg., the former is greater than the latter. The result of photoelastic method shows that in the range of rapid decreasing of normal stress on the tool edge, the shear is maintaining a certain value.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.102-112
• /
• 1995

Temperature distribution on the rake face and flank face in orthogonal turning with cutting tool of high speed steel is studied by using a finite element method and experiments. Experiments are carried out to verify the validity of the temperature measurement by using a thermoelectric couple junction imbedded in a cutting tool of high speed steel. Good agreement is obtained between the analytical results and the experimental ones for the temperature distributions on both the rake face and flank face of cutting tool with high speed steel. The analytical results show that the temperature on the top flank face of a tool is higher than it on the top rake face of the tool because of the difference of the friction velocity on each face of the tool.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.2
• /
• pp.252-261
• /
• 1988

Through the careful interpretation of the results of the cutting tests carried out in this study, it is found that under the cutting conditions when the internal shear of the chips take place the cutting can be treated essentially as a steady state problem. A new shear angle equation has been developed employing the conditions of force and moment equilibrium about the tool edge and the stress distribution model suggested by Zorev.The equation contains the chip-tool contact length C and stress distribution index n as important parameters.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.5
• /
• pp.191-197
• /
• 2007

Inclined surface milling in the mould and die industries is one of the most commonly needed cutting process. For the variety and complexity of cutting characteristics in various cutting condition, it is difficult to select a optimal tool path orientation. Especially, when the cutting process becomes unstable, it induces self-exited vibrations, a frequent cause of poor tool life, rough surface finish, damage to the workpiece and the machine tool itself, and excessive down time. The comparative results through FFT analysis in this study provide a guideline for the selection tool path orientation.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.591-596
• /
• 1999

Due to the development of CNC machining centers and the complexity of machined part geometry, the ball-end milling became the most widely used the cutting process. Generally, the tool runout defined as the eccentricity of a rotating tool set in the holder involved the spindle runout and the problem of tool runout generated to remove the workpiece is a main factor affecting the machining accuracy. In this paper, the relationship of tool runout(zero-to-peak, P-K) and surface shape on the change of cutting conditions is studied and it is proposed the probability of prediction of surface shape from the in-process tool runout measurements with high response displacement sensor in the ball-end milling