• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.250-251
• /
• 2012

여러 분야에서 공간적 물리량, 패턴 또는 분포 등의 공간정보를 공간적으로 처리하는 방법이 연구 개발되어 왔다. 공간필터링 또는 공간필터법이라고 불리기도 하는 이 기법은 현재 직선 회전 군속도, 표면거칠기, 토석류속도, 형상, 결함 등 여러 계측분야에서 활용되고 있다. 이들 분야에 활용되는 공간필터는 복수개의 슬리트로 구성되며, 최상의 계측목적을 달성하기 위해서는 최적하중함수를 설계하여 각각의 슬리트에 맞는 하중값을 적용하여야 한다. 본 연구에서는 계측계의 간략화를 구현하기 위한 기초연구로서 기본이 되는 단슬리트의 구조 및 회전에 따른 필터링특성을 분석하였다.

• The KIPS Transactions:PartA
• /
• v.13A no.7 s.104
• /
• pp.607-614
• /
• 2006

The checkpointing schemes should reduce the process delay through managing the checkpoints of each node to fit the network load to enhance the performance of the process running on the cluster system that write the checkpoints into its global stable storage. For this reason, a cluster system with single IO space on a distributed RAID chooses a suitable checkpointng scheme to get the maximum IO performance and the best rollback recovery efficiency. In this paper, we improved the striped checkpointing scheme with dynamic stripe group size by adapting to the network bandwidth variation at the point of checkpointing. To analyze the performance of the multi striped checkpointing scheme, we applied Linpack HPC benchmark with MPI on our own cluster system with maximum 512 virtual nodes. The benchmark results showed that the multistriped checkpointing scheme has better performance than the striped checkpointing scheme on the checkpoint writing efficiency and rollback recovery at heavy system load.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.8
• /
• pp.476-482
• /
• 2010

The ultrasonic transient fields and B-mode images of a point target which were simulated for a medical ultrasonic probe with a few defective piezo-elements were compared with those for a normal probe. The present study considered a 3.5 MHz linear array probe whose acoustic beam was formed by the 64 active elements of total 192 elements. The results showed that the maximum amplitude and -3 dB width of the acoustic fields by main-lobes decreased linearly as the defective element number increased from one to four. However, the depths of foci remained almost unchanged, and the pressure differences between main-lobes and side-lobes tended to decrease due to rise in pressures in side-lobes. Such changes in ultrasonic fields affected the B-mode images of point targets. So the artifacts were formed in the right and left side of the target, and the lateral spatial resolutions were decreased while the axial resolution was almost the same.

• The KIPS Transactions:PartA
• /
• v.13A no.5 s.102
• /
• pp.455-464
• /
• 2006

In multi-regional mobile agent computing environments, spatial replication-based approach may be used as a representative mobile agent fault-tolerance technique because it allows agent execution to make progress without blocking even in case of agent failures. However, to apply this approach to real mobile agent-based computing systems, it is essential to minimize the overhead of locating and managing mobile agents replicated on each stage. This paper presents a new mobile agent location management protocol SRLM to solve this problem. The proposed protocol allows only the primary among all the replicated workers of each stage to register with its regional server and then, significantly reduces its location updating and message delivery overheads compared with the previous protocols. Also, the protocol addresses the location management problem incurred by electing the new primary among the remaining workers at a stage in case of the primary worker's failure.

• The Korean Journal of Applied Statistics
• /
• v.35 no.3
• /
• pp.407-419
• /
• 2022

The semiconductor fabrication process is complex and time-consuming. There are sometimes errors in the process, which results in defective die on the wafer bin map (WBM). We can detect the faulty WBM by finding some patterns caused by dies. When one manually seeks the failure on WBM, it takes a long time due to the enormous number of WBMs. We suggest a two-step approach to discover the probable pattern on the WBMs in this paper. The first step is to separate the normal WBMs from the defective WBMs. We adapt a hierarchical clustering for de-noising, which nicely performs this work by wisely tuning the number of minimum points and the cutting height. Once declared as a faulty WBM, then it moves to the next step. In the second step, we classify the patterns among the defective WBMs. For this purpose, we extract features from the WBM. Then machine learning algorithm classifies the pattern. We use a real WBM data set (WM-811K) released by Taiwan semiconductor manufacturing company.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.3_4
• /
• pp.204-212
• /
• 2004

Existing distributed systems have higher probability of failures occurrence than stand-alone system, so many fault tolerant techniques have been developed. Because of insufficient storage resulting from the increased fault tolerance information stored, the performance of system has been degraded. To avoid performance degradation, it needs delete useless fault tolerance information. In this paper, we propose a garbage collection algorithm for fault tolerance information. And we define and design the garbage collection agent for garbage collection of fault tolerance information, the information agent for management of fault tolerant data, and the facilitator agent for communication between agents. Also, we propose the garbage collection algorithm using the garbage collection agent. For rollback recovery, we use independent checkpointing protocol and sender based pessimistic message logging protocol. In our proposed garbage collection algorithm, the garbage collection, information, and facilitator agent is created with process, and the information agent constructs domain knowledge with its checkpoints and non-determistic events. And the garbage collection agent decides garbage collection time, and it deletes useless fault tolerance information in cooperation with the information and facilitator agent. For propriety of proposed garbage collection technique using agents, we compare domain knowledge of system that performs garbage collection after rollback recovery and domain knowledge of system that doesn't perform garbage collection.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.69-76
• /
• 1998

To test all internal faults in the case that the number of Primary Input is N, we need patterns that are composed of PI's of maximum 2N. In this paper, we proposed the method to reduce a search space by dividing the multiple output circuit into subcircuit that is related with output. And this method, called PBM(Partition-Based Method), can generate a set of test pattern. The method can effectively generate a test pattern for evaluating all fault of circuit, because the length of input pattern is smaller than that of full circuit and PBM doesn't search any signal line that is not concerned with detecting fault.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.1
• /
• pp.109-116
• /
• 2012

This paper presents a study on the nonlinear behavior of an innovative bridge girder made from concrete-filled and tied tubular steel arch (CFTA) under static loading. Manufacturing of the CFTA girder may have defects which may highly affect the symmetry and performance of the structure. A simple method is proposed by using stiffness extracted from static test data to detect manufacturing defects of the CFTA girder. A three-dimensional finite element model was used in the numerical analysis in order to verify the method. The proposed method was experimentally validated through static tests of the CFTA girder. The application of the proposed method showed that it is effective in identifying invisible manufacturing defects of the CFTA girder, especially for mass production of a standard type in the factory.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.1
• /
• pp.109-128
• /
• 2022

The precise inspection for safety and diagnosis (PISD) of tunnel has been conducted by the special act on safety control of public structures. However, the present assessment for the segmental lining of TBM tunnel has limitation such as: NDTs for integrity, segmental configuration for field inspection, and consideration for jacking system. Even if the number of TBM tunnel is less than 1% of enrolled facility in FMS, more attention to maintenance should be necessary due to its usage such as multi-use facility and national important facility. Compared to NATM tunnel, excavated by drilling and blasting and then installed lining by cast-in-place within 6~12 m, TBM tunnel is cut out ground by disk and cutter-bit and then assembled 7 pieces of precast segment, 1.2~1.4 m wide. Different features of design, construction, and maintenance should be considered to be more exact evaluation of TBM tunnel. The characteristics of defect is categorized and analyzed with 11 operational TBM tunnels in domestic subway. To be more comprehend various particular defects, foreign studies have been also adapted. Crack and leakage are categorized in 7 patterns. Breakage/spalling and corrosion are also grouped into 3 patterns. Patterned defects or damages are fed back in design, construction, and are useful guidelines for maintenance stage in future.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2000.11a
• /
• pp.538-541
• /
• 2000

본 논문에서는 인터넷과 같은 가상 공간에서 사용자의 신분을 확인하기 위해서 길함-허용기법을 이용해 본인의 신분을 확인하는 인증 기법을 제안한다. 제안 기법은 기존 패스워드 기법에 의존하는 신분 확인 기법을 다수의 질문-응답 기법으로 전환하므로써 인간의 기억력 한계와 패스워드 강도 사이의 trade-off를 고려한 방안으로 다양한 질문의 형태에 따라 확률에 근거하여 신분을 확인하는 방안으로 가상 공간에서의 인터넷 뱅킹 및 다양한 전자상거래 응용 등에 직·간접적으로 활용될 수 있다. 또한 실용적인 측면의 응용을 위해 다양한 종류의 질문을 구성하여 이에 대한 경험적 정답 확률을 고려한 신분 확인 확률도 산출하였다.