• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.182-182
• /
• 2012

반도체 저차원 구조에서의 독특한 광학적, 전기적 특성이 연구됨에 따라 양자점, 양자선, 양자우물과 같은 공간적으로 구속되어 있는 나노구조 형성에 관한 제작 방법과 그 특성 연구가 많은 관심을 받고 있다. 하지만 Si 또는 GaAs 반도체와 달리 광소자로써 각광받고 있는 질화물 반도체의 경우, 높은 화학적, 물리적 안정성으로 인해, 화학적 에칭에 의한 나노구조 형성이 쉽지 않고, 물리적 에칭의 경우, 표면 결함이 많이 발생되는 문제점이 있어 어려움을 겪고 있다. 최근 본 연구그룹에서는 자체 개발한 고온 HCl 가스를 이용한 화학적 기상 에칭법을 이용하여, 다양한 크기, 모양의 나노구조 형성 및 이를 이용한 다양한 타입의 InGaN 나노구조 제작 및 특성에 대해 연구하였다 (Figure 1). 화학적 기상 에칭법을 이용한 나노구조의 경우, 선택적인 결함구조 제거 및 이종기판 사용에 따른 응력 감소, 광추출 효율을 증가시켜, 우수한 구조적, 광학적 특성을 보여주었고, 에칭 조건에 따른, 피라미드, 막대와 같은 다양한 나노구조를 제작하였다. 뿐만 아니라 이를 기반으로 한 다양한 InGaN 나노구조를 모델을 제시하였는데, 첫번째는 GaN 나노막대 기판 위에 형성된 고품위InGaN 양자우물구조 성장이고, 두 번째는 InGaN 양자우물을 포함하고 있는 나노막대 구조 제작, 세번째는 InGaN/GaN core/shell 구조이다 (Figure 2). 이러한 InGaN 나노구조의 경우 높은 광결정성 및 크게 감소한 내부 전기장 효과, 광방출에 유리한 구조에 기인한 우수한 광특성을 보여주고 있어 광소자로써 응용가능성이 크고, InGaN/GaN core/shell 나노구조의 경우, 나노구조 내부에 단일 InGaN양자점이 형성되어 높은 광추출효율의 양자광소자로써 활용가능성을 보여주었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.8
• /
• pp.576-582
• /
• 2018

In this paper, a planar equi-phase power divider is proposed using fixed phase shifters. As the integrability of a phased array antenna increases for accurate beam steering, a conventional method to excite equi-phase signals to all element antennas, extending the feedline, has spatial limitations. Therefore, the planar equi-phase power divider is designed using a defected ground structure with a planar phase shift function without intentional feedline extension. The defected ground structure has been considered for a low insertion loss and a controllable phase shift, whereas the power divider has been designed and implemented with a port-to-port isolation and a planar configuration.

• Tunnel and Underground Space
• /
• v.10 no.1
• /
• pp.70-79
• /
• 2000

We carried out NPT-ensemble (constant-number of particles, pressure, and temperature) Molecular Dynamics (MD) simulations for measuring strength anisotropy under uniaxial compressive stress rotated to the crystallographic axes in $\alpha$-quartz. Uniaxial compressive strengths of a single quartz crystal were measured in directions of the a- and c-axis. Measured uniaxial strength of a single quartz crystal was higher in the direction parallel to the c-axis than that measured in the direction normal to the c-axis. However the reverse was found in calculated uniaxial strengths by MD simulation. The contradictive result of strengths was observed in both cases but was found to be different in origin. Strength anisotropy of defectless $\alpha$-quartz crystal in MD simulation is basically caused by structural difference of quartz. By contrast, anisotropy of measured strength in the uniaxial compression test is related to oriented micro-defects developed during crystal growth.

• Tunnel and Underground Space
• /
• v.9 no.2
• /
• pp.114-130
• /
• 1999

It is very important to study on the structural behaviors of structurally damaged tunnel linings. A series of centrifuge model tests were performed in order to investigate different behaviors of tunnel linings. A 1/100-scaled aluminum horseshoe tunnel linings with a radius 5 cm, height 8 cm were buried in a depth with dry Joomunjin standard sand, the relative density of which was 86%. Such sectional forces as bending moments and thrusts along the tunnel circumference were measured by twelve strain gages. Earth pressures in soil mass and on the outside of lining model were estimated by pressure transducers, ground surface settlements at a center and edges by using LVDTs.

• Tunnel and Underground Space
• /
• v.11 no.3
• /
• pp.217-224
• /
• 2001

Rock masses are usually discontinuous in nature due to various geological processes and contain rock joints and bridges. Crack propagation and coalescence processes in rock bridge mainly cause rock failures in slopes, foundations, and tunnels. In this study, we focused on the crack initiation, propagation and coalescence process of rock materials containing two pre-existing open cracks arranged in different geometries. Specimens of 120${\times}$60${\times}$25 mm in size, which were made of Yeoman Marble, were prepared. In the specimens, two artificial cracks were cut with pre-existing crack angle ${\alpha}$, bridge angle ${\beta}$, pre-existing crack length 2c and bridge length 2b. Wing crack initiation stress, wing crack propagation angle, and crack coalescence stress were measured and crack initiation, propagation and coalescence processes were observed during uniaxial compression. Crack coalescence types were classified and analytical study using Ashby and Hallam model (1986) was performed to be compared with the experimental results.

• Journal of the Korean Magnetics Society
• /
• v.14 no.6
• /
• pp.207-212
• /
• 2004

Eddy current (EC) testing methods are widely used in a variety of applications including the inspection of steam generator tubes in nuclear power plants, aircraft parts and airframes. A key factor that affects the EC signal is lift-off which means the physical distance between a sensor and a specimen in the testing. In practice, it is difficult to keep track of the actual value of the lift -off during a specific experiment, simulation or testing in the field, which is essential for accurate interpretation of the signal to be used in the following steps. Hence it is necessary to have a scheme to render the EC signal invariant to the effects of lift-off in spite of the changes in the real world. This paper describes a new method for compensating EC signals for variations in lift-off by acquiring an invariance feature using a homomorphic operator and neural network techniques. The signals from various lift-offs are transformed to obtain a zero lift-off equivalent signal that can be subsequently used for defect characterization in the next step.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.1
• /
• pp.146-152
• /
• 2022

Information collected from temperature, humidity, inclination, and pressure sensors using Raspberry Pi or Arduino is used in automatic constant temperature and constant humidity systems. In addition, by using it in the agricultural and livestock industry to remotely control the system with only a smartphone, workers in the agricultural and livestock industry can use it conveniently. In general, temperature and humidity are expressed in a line graph, etc., and the change is monitored in real time. The technology to visually express the temperature has recently been used intuitively by using an infrared device to test the fever of Corona 19. In this paper, the information collected from the Raspberry Pi and the DHT11 sensor is used to predict the temperature change in space through intuitive visualization and to make a immediate response. To this end, an algorithm was created to effectively visualize temperature and humidity, and data representation is possible even if some sensors are defective.

• Journal of Korea Society of Industrial Information Systems
• /
• v.29 no.1
• /
• pp.15-29
• /
• 2024

With recent advances in information and communication technology, YouTube has become a powerful online space for users to create and share content about their interests and experiences, creating new cultural phenomena. In particular, there needs to be more research on social media in the manufacturing sector because, unlike distribution and retail, there has been relatively little direct contact with consumers. YouTube can positively affect firms' performance by promoting products and brands. On the other hand, it can also cause risks, such as production disruption due to rumors or misinformation. Thus, it is necessary for firms to examine how information about an electric automobile defects spreads on YouTube according to the number of subscribers and views through statistical network analysis.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.3
• /
• pp.221-232
• /
• 2008

Rock bolts have been installed into rockmass as a main support system. In order to evaluate the rock bolt integrity using non-destructive technique, the transmission method of the guided ultrasonic wave has been successfully performed. For the transmission method, however, the source for the generation o# guided ultrasonic waves should be installed at the end of the steel bar during construction of the rock bolt in the field. The purpose of this study is to suggest a reflection method that the source and the receiver are installed on the head of the steel bar. The reflection method is compared with the transmission method using non-embedded rock bolts and rock bolts embedded in concrete block. In this experiment, the piezo disc element is used as the source and the AE sensor is used as the receiver. The wavelet transform is applied to determine the energy velocity. The experimental studies show that the reflection method produces almost identical value of the transmission method, and the energy velocity increases with the defect ratio. This study suggests that the reflection method of the guided ultrasonic wave may be a suitable method fur the rock bolt integrity evaluation in the field.

• Journal of the Korean Geographical Society
• /
• v.31 no.4
• /
• pp.648-661
• /
• 1996

The traditional von Thunen model has various shortcomings. Perhaps the greatest dificiency is the model's sole emphasis on the production side of the economy;that is, the agricultural markets are rarely closed for demand. In thes paoer a closed model for a three-activity, two-dimensional economy is developed. Equillibrium solutions are generated for prices, land areas, and outputs. Comparative static analysis then follows. Attention is next given to a maximum expected-return model under environmental uncertainty. Land uses for the traditional model and the closed model are then compared.