• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.236-241
• /
• 2001

The speckle pattern is formed by laser light from a multimode optical fiber. The speckle fluctuation is the result of interference among propagation modes when the optical fiber is subjected to a mechanical perturbation at any point along its length. The experiments were carried on for the study of the feasibility of producing an intrusion detection system using the speckle fluctuation. The speckle fluctuation signals were monitored at real time by an oscilloscope which was connected with a rectifier and a FVC. We used a jig as a PD holder to improve the sensitivity of speckle phenomena and simplify its structure. So we can know the time and magnitude of perturbation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.4
• /
• pp.88-94
• /
• 2007

This paper deals with the performance analysis of 3-dimensional array antenna by DOA estimation and beamforming in GPS receiver for performance improvement by interference elimination. The array antenna in GPS receiver can improve the system performance by estimating DOA of arriving signal direction, making the main beam for desired direction and elimate the jammer signal by nulling while keeping the GPS signal direction by spatial filtering. In this paper, we propose five types of 3-dimensional array antenna and analyze the estimation error via MUSIC algorithm which is used for the estimation of DOA of arrived signal and beamforming performance. In analyzing DOA performance, we measure DOA estimation error, while in analyzing beamformig performance, we measure BER. In beamforming performance analyzing, we use various jammer power and the existence of GPS signal and angle spread. By performing through the computer simulation, Curved (B) 7-element antenna in proposed 3-dimensional array antenna exhibits the superior performance in the DOA estimation, estimation error, BER characteristic and angle spread compared to the rest four array antenna types.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.2
• /
• pp.39-47
• /
• 2017

The SAR payload of the KOMPSAT-5 is equipped with an X-band (9.66GHz) microwave-based sensor. Especially, since it has a fixed antenna that can be electronically steered with respect to the azimuth and elevation planes, various applications are expected. This study evaluates the production performance and the accuracy of the DEM by producing DEM using the HR and UH mode images of KOMPSAT-5. To evaluate the production performance of the DEM, the sensitivity of DEM was assessed through a baseline analysis and $2{\pi}$ ambiguity; it was found to have good production performance. In addition, to evaluate the accuracy of the produced DEM, 30 check points were compared with SRTM data. As a result, STDEV ${\pm}15-20m$ accuracy was obtained. If the accuracy of the DEM is improved by adjusting the parameters of the filtering method or phase unwrapping method in the future, it will be possible to widely use the KOMPSAT-5 image for environmental and disaster monitoring.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.4
• /
• pp.327-334
• /
• 2006

The aerial photos need in a simple object such as cartography and ground cover classification and also in a social objects such as the city plan, environment, disaster, transportation etc. However, the shadow, which includes when taking the aerial photos, makes a trouble to interpret the ground information, and also users, who need the photos in their field tasks, have a restriction. Generally the shadow occurs by the building and surface topography, and the detail cause is by changing of the illumination in an area. For removing the shadow this study uses the single image and processes the image without the source of image and taking situation. Also, applying the entropy minimization method it generates the 1-D gray-scale invariant image for creating the shadow edge mask and using the Canny edge detection creates the shadow edge mask, and finally by filtering in Fourier frequency domain creates the intrinsic image which recovers the 3-D color information and removes the shadow.

• Journal of the HCI Society of Korea
• /
• v.2 no.1
• /
• pp.49-56
• /
• 2007

A nonintrusive projection-based AR approach using complementary pattern has been recently proposed and applied to virtual studio. However, the approach faces the tradeoff between the pattern imperceptibility and compensation accuracy. To alleviate the tradeoff, we propose a content adaptive pattern concealment approach. The projector input images (AR images) are divided into rectangular regions and spatial variation and color distribution are computed in the regions. Based on the spatial variation and color distribution, we embed locally different strength of pattern images into different color channels. It is demonstrated that the proposed approach has two opposite advantages by comparing it with the previous (non-adaptive) approach through a variety of experiments and subjective evaluation. Our content adaptive approach can obtain the same performance using weaker pattern than the previous approach and thus significantly improve the imperceptibility of the pattern. On the contrary, our content adaptive approach can make strong pattern less perceptible and thus produce better compensation results.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.103-108
• /
• 2007

최근 프로젝터의 보편화로 인해 프로젝터를 증강현실의 디스플레이 장치로 활용하는 연구가 활발히 진행되고 있다. 관련 연구들을 흔히 프로젝션 기반 증강현실이라고 부른다. 프로젝션 기반 증강현실을 구현하기 위해서는 스크린의 기하(geometry) 및 컬러(photometry) 정보를 획득하는 과정이 선행되어야 하는데, 이는 프로젝터를 이용하여 정해진 패턴 영상을 투사하고 이를 카메라로 캡쳐한 후, 카메라 영상에 다양한 컴퓨터비전 기술들을 적용함으로써 행해진다. 이러한 스크린 기하 및 컬러 정보 획득 기술은 가시적인(visible) 패턴 영상이 사용자의 몰입감을 저해한다는 단점을 가진다. 특히, 스크린의 기하 및 컬러 정보가 수시로 변하는 환경에서는 가시적인 패턴 영상을 사용하는 기존의 스크린 기하 및 컬러 정보 획득 기술은 유용하지 못하다. 이러한 문제점을 해결하기 위해 일부 패턴 영상을 비가시적(invisible)으로 만드는 기술들이 제안되었다. 본 논문에서는 관련 기술들을 비간섭 프로젝션 기반 증강현실이라고 한다. 특히, 보색 패턴(complementary patterns)을 증강현실 영상에 삽입하는 방법은 부가적인 장비없이 간단한 영상처리만으로 효과적으로 패턴 영상을 비가시적으로 만들어 줄 수 있으며, 최근 가상 스튜디오에 활용하는 방안이 모색되고 있다. 그러나, 삽입된 보색 패턴의 세기와 비가시성 사이는 상반관계(trade-off)를 가지므로, 일반적인 환경에서는 보색 패턴의 비가시성을 보장할 수 없다. 본 논문에서는 이러한 보색 패턴의 비가시성을 극대화하기 위해 컨텐츠 적응형 패턴 삽입 기술을 제안한다. 증강현실 영상의 색감 및 텍스처의 복잡도에 따라 크게 4 가지 경우로 분류하여 부분적으로 다른 채널 및 세기로 보색 패턴을 삽입한다. YIQ 컬러 공간에서 표현된 증강현실 영상을 균일한 크기의 영역으로 나눈 다음, 각 영역에 대해 I 성분이 지배적이면 Q 채널에 패턴을 삽입하고 Q 성분이 지배적이면 I 채널에 패턴을 삽입한다. 한편, 각 영역에 대해 텍스처의 복잡도가 크다면 강한 패턴을, 복잡도가 작으면 약한 패턴을 삽입한다. 여기서, 텍스처의 복잡도는 간단한 미분 필터(derivative filter)를 이용하여 계산된다. 다양한 실험 및 사용자 평가를 통해, 제안된 방법은 기존 방법에 비해 크게 두 가지 상반관계를 가지는 장점을 가짐을 확인하였다. 스크린의 기하 및 컬러 정보를 획득하는 성능 면에서 제안된 방법이 기존의 방법과 유사하도록 채널 및 패턴의 세기를 결정한다면, 기존의 방법에 비해 패턴의 비가시성이 크게 개선된다. 반대로, 제안된 방법의 패턴의 비가시성이 기존의 방법과 유사하도록 채널 및 패턴의 세기를 결정한다면, 기존의 방법에 비해 스크린의 기하 및 컬러 정보를 획득하는 성능이 크게 개선된다.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.3
• /
• pp.283-292
• /
• 2005

Ionosphere is deeply coupled to the space environment and introduces the perturbations to radio signal because of its electromagnetic characteristics. Therefore, the status of ionosphere can be estimated by analyzing the GPS signal errors which are penetrating the ionosphere and it can be the key to understand the global circulation and change in the upper atmosphere, and the characteristics of space weather. We used 9 GPS Continuously Operating Reference Stations (CORS), which have been operated by Korea Astronomy and Space Science Institute (KASI) , to determine the high precision of Total Electron Content (TEC) and the pseudorange data which is phase-leveled by a linear combination with carrier phase to reduce the inherent noise. We developed the method to model a regional ionosphere with grid form and its results over South Korea with $0.25^{\circ}\;by\;0.25^{\circ}$ spatial resolution. To improve the precision of ionosphere's TEC value, we applied IDW (Inverse Distance Weight) and Kalman Filtering method. The regional ionospheric model developed by this research was compared with GIMs (Global Ionosphere Maps) preduced by Ionosphere Working Group for 8 days and the results show $3\~4$ TECU difference in RMS values.