• Economic and Environmental Geology
• /
• v.54 no.5
• /
• pp.573-580
• /
• 2021

This study analyzed the induced effects of the aggregate and stone sectors using the industry association table. First, the added value of the aggregate and stone sectors was summarized, and then the intermediate input structure and induced effect were analyzed. In terms of value-added structure, aggregate and stone showed a higher employee remuneration rate compared to the manufacturing industry, and a higher rate of operating surplus compared to other mining industries. The intermediate input structure summarizes the sector using aggregate and stone products as intermediate inputs and their input ratio. The proportion of the intermediate element input structure was confirmed. In addition, the main input sectors of ready-mixed concrete, the largest consumer of aggregate and stone, are also summarized. The production-inducing effect of aggregate and stone showed a higher influence coefficient than the sensitivity coefficient, confirming that they had a relatively large rear chain effect. The production inducement effect was reviewed by reconstructing the industry association table, and it was found to show a relative superiority in the influence coefficient, similar to the results derived according to the provisional classification of the Bank of Korea.

• Economic and Environmental Geology
• /
• v.57 no.2
• /
• pp.119-128
• /
• 2024

In Australia & Canada, architectural rock and aggregate are one of the mineral resources, and related data and information provided integrated with them. In these countries, the provided data and information, through the information system of local government and national geological survey organizations, are interactive maps, geological and thematic maps, exploration data set, 3 dimension geological models, minning rights status, survey reports and related papers etc. However, in case of Korea, aggregate and architectural rock are not assigned as the kind of mineral resources in accordance to domestic mining law, and related geological data and information are not provided from comprehensive mineral information system established in public geoscience organizations. And the administrative and informative management are conducted separately through the different governmental organizations such as Ministry of construction, Korea forest service, geoscience institute & Korea Mine & Reclamation Corporation. For securing the supply of architectural rock and aggregate resources, and for the convenience of their development & utilization, the unified information system and governance reform for the related industry is needed.

• Proceedings of the KSEG Conference
• /
• 2004.03a
• /
• pp.25001-25035
• /
• 2004

석재의 무분별한 개발로 인한 산림훼손을 최소화하고 상품성 있는 석재 가능성을 확인하기 위하여 채석허가 이전에 지질조사 및 시추탐사를 통한 매장량과 경제성 등 채석타당성을 평가하는 것이 필요하다. 골재가 부존하는 충적층은 다양한 입도와 지층 단면을 가지고 있기 때문에 이를 대상으로 골재를 채취하려면 골재의 품질과 매장량을 확인해야 한다. 또한 무분별한 골재 채취는 홍수시 유량과 유속을 변경시키므로 합리적인 채취량을 추산할 필요가 있다. (중략)

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.50-56
• /
• 2019

This study aims to make artificial stone by recycling blast furnace slag powder, red mud and recycled aggregate, which are known as industrial waste. Recycled aggregate is a typical construction waste, and various recycled products such as concrete block are being sold. In this study, we tried to make artificial stone mixed with waste such as recycled aggregate, and experimented with the use of artificial stone and further study. As the red mud replacement ratio increased, the absorption ratio, fluidity and air content of the matrix were measured to be decreased, and the strength and density were found to increase. The fluidity and absorption ratio decreased with increasing the replacement ratio of recycled aggregate, and the air quantity, rate of aggregate on the surface, density and intensity increased to a certain level. Therefore, this study intends to make artificial stone using recycled resources and conducted basic experiments for further study.

• Economic and Environmental Geology
• /
• v.57 no.2
• /
• pp.219-231
• /
• 2024

A survey of concrete plants in Incheon Metropolitan City and Gyeonggi Province was used to conduct an analysis of aggregate transport distance and production forms, as well as to evaluate the features and current status of aggregates distribution. As a result, areas such as Incheon, Siheung, Bucheon, Gimpo, and Siheung, where the distance to the demand points is less than 20 km, exhibited bidirectional distribution whereas Paju, Yongin, Yangju, and Pocheon, with distances ranging from 20 to 50 km is showed a unidirectional distribution pattern supplying aggregates exclusively to Incheon. Survey on manufacturing forms, more than 85% of the gravel dispersed in the Incheon area is made up of crushed aggregates derived from rocks discharged at construction sites indicating a considerable skew in supply chain. These findings are predicted to have a detrimental influence on aggregate supply in the long run, necessitating policy changes targeted at building an optimal aggregate distribution market.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.3
• /
• pp.237-243
• /
• 2014

The environmental problem is serious due to global warming In a concrete industry, the effort to reduce the problem of the destruction of environment arising from the indiscriminate use of limestone that is the raw material of cement and aggregate and the exhaustion of resources are continually emphasized In this research, the waste porcelain and waste glass that are the natural aggregate substitute materials were mixed and were applied. In addition, the magnesia phosphate composite and fly ash are mixed with a cement substitute material and the properties of the artificial stone was examined. Density, water absorption, rate of aggregate on the surface, compressive strength, and flexural strength were performed. As a result of the test, it is that waste glass with 60% and waste porcelain with 70% are the most excellent mix to produce the artificial stone.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.136-142
• /
• 2016

As the rapid industrialization and modernization progress of the world it is becoming a fast-paced environment pollution. And, dust or environment pollution to solve reckless diggings of natural aggregate cause a serious problem. This study was used a Blast Furnace Slag and Combined Heat and Power Plant of Fly Ash as a cement substitute to reduce $CO_2$ emissions during cement production, this study intend to suggest it's result as basic data 'Properties of Artificial Stone interior or exterior materials type utilizing industrial by-product and waste resource' utilizing Waste Porcelain and Waste Glass. As a result, it was high strength that matrix added the Combined Heat and Power Plant of Fly Ash of addition ratio 40%. Also, pre-experiment was conduct as mixing ratio of waste glass, waste porcelain on the basis of the preceding experiment, proper mixing ratio was judged that proper of waste glass, waste porcelain was mixing ratio 60, 70 (%) of appeared surface aggregate ratio more than 45%.

• Korean Journal of Mineralogy and Petrology
• /
• v.37 no.1
• /
• pp.1-11
• /
• 2024

World stone production in 2021 stood at 162.5 million tons, up by 7.5 million tons, or 4.8 percent, compared to the previous year when the production came in at 155 million tons. Six top countries with the most of stone production were China, India, Turkey, Brazil, Iran and Italy and these six countries accounted for 72.8 percent of total production in the world. Stone exports stood at $21.68 billion in 2021, up by $2.3 billion from the previous year. Exports of raw materials and processed stones stood at 54.4 million tons, up by 2.98 million tons from the previous year. In terms of aggregate exports, exports of natural stones increased by $2.3 billion to $21.7 billion while exports of artificial stones rose $2.6 billion to $13.6 billion in 2021 compared to the previous year. The average price of stone (Code: 68.02) was up by $65.2 per ton to $794.82. The price of board, processed stone, an ingredient for building materials, increased by $3.52 per square meter to $42.96 per square meter. Recycling was always the problem as the volume of the total quarry was 333.5 million tons, of which only 28.8 percent were finished products and the remaining 71.2 percent were waste generated from stone extraction and processing. Korea's stone exports stood at $1.97 million in 2021, down 38.3 percent on year, while imports were up 8.6 percent to $758.9 million. Stone exports are expected to grow to 66.1 million tons in 2025, while usage is expected to reach 108.92 million tons, or 2 billion square meters.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.711-716
• /
• 2023

A large amount of stone is required as a high-end strategy for building new construction and remodeling work, and aggregates have to be collected from many stone mountains due to the lack of river sand and gravel required for concrete production. This study examines the case of development of stone materials for construction, conduct and analyze residents' attitudes, find out residents' thoughts on stone mountain development, develops the area as an alternative to the devastation caused by stone mountain development, and recycles it as an efficient resource. We intend to conduct basic research to propose a plan. As a result, Local residents have a lot of antipathy against the use of quarry, so it is necessary to use the area that is far from the residents' areas as a quarry. It was concluded that it was desirable to restore and develop in the right direction.

• Explosives and Blasting
• /
• v.19 no.2
• /
• pp.19-26
• /
• 2001

국토의 효율적 활용을 위한 각종 토목.건설공사나 석재 및 골재생산 등을 위해 암반을 굴착함에 있어 다양한 산업용 화약류가 이용되고 있다. 그러나 화약의 사용으로 인해 수반되는 발파진동은 인체 및 구조물 등에 피해를 발생시켜 인근의 주민과 마찰을 일으키고 있다.본 연구에서는 발파진동속도 data를 취합하여 분석 사용함에 있어서 V, T, L 성분의 최대 실벡터합을 사용하는 경우와 최대 벡터합을 사용하는 경우를 비교하여 실제 현장 기험시 적용성을 높이고자 하였다. 진동속도는 최대 실 벡터합에 비해 최대 벡터합에 의해 구해진 진동속도의 크기가 장승근에서는 24.6%, 삼승근에서는 26.1%가 증가하는 것으로 나타났으며, 단일성분의 최대치, 최대 실벡터합, 최대 벡터합의 안전율은 1 : 1.154 : 1.359로 나타났다