• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.46-47
• /
• 2013

This study investigates the effect of a grading of aggregate on the properties of concrete. It is a common sense in Korea that the production of coarse aggregate in ready mixed concrete industry excludes particular aggregate size ranged from 5 mm to 13 mm for saving the production cost. This causes a gap grading of the aggregate for concrete, which can lead to the increase of unit water, the development of drying shrinkage-induced crack and the reduction of compressive strength. In this study, conventional aggregate obtained from a ready mixed concrete factory and the aggregate with a modified grading produced in lab. condition were prepared. Results showed that a good grading of aggregate (i.e., the ratio of 5~13 mm and 13~25 mm is 6 to 4) produced in the lab. condition significantly improved the slump and the compressive strength of the concrete.

• Journal of Korean Home Economics Education Association
• /
• v.16 no.3
• /
• pp.1-25
• /
• 2004

This study analyzes the external forms of the household textbooks and also the contents of them used at girls' middleㆍhigh schools during the period of Japanese ruling over Korea. To this end, 8 household textbooks published from 1928 to 1937 were analyzed. The results of the study are summarized as follows. 1. The household subject had become the one of the most important subjects to girl students as the practical uses were emphasized in educational area during the period. As a result. the classes of the household were the second in hours, following the class of Japanese (the national language) to girl students. 2. The contents of the household textbooks were intended to contain 'the modern' and 'the newest'. The students were also suggested to apply the contents of the textbooks to real home life. Many pictures, photos and illustrations were included in household textbooks to help students to understand the contents of the subject. 3. The purposes of the household class were the reformation of the living conditions and home economics. 4. The external characteristics of the household textbooks during the period were as follows. - Written in Japanese vertically and the size of the textbook was A5 (150/210) with pulp paper of good quality - The type style of the body of the textbooks was Ming-style type- The sequent order of the textbooks was the outer cover, the title page, pictorial, introduction, table of contents, the body, appendix and the back cover. 5. The household textbooks consisted of the first volume and the second volume. The first volume contained clothing and textiles, food and nutrition and housing. Taking care of the aged. nursing. child care, household economy and home management were included in the second volume. 6. The household textbooks were designed to make women the housewives.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.89-92
• /
• 2001

Because the grading of aggregate is major factor affecting on compressive strength and durability of concrete, the standard specification of concrete has proposed that the standard grading should be used to make ordinary concrete having good quality. But, it is not suitable for making product having low W/C because of difference between them in manufacturing processes and demanded efficiencies. This study investigated if the grading of the fine aggregate affects on tamping efficiency and compressive strength of concrete-based product. The results of this study showed that the suitable grading for making concrete-based product ranged from C type(FM:2.77) to D type(FM:3.38).

• Proceedings of the Korea Contents Association Conference
• /
• 2011.05a
• /
• pp.465-466
• /
• 2011

이 연구는 일본식 배수공이 설치된 제방의 침투 흐름을 비정상 상태로 SEEP/W 모형을 사용하여 해석하고 모형의 적용성을 평가하기 위해 수행하였다. 수치모형의 적용성 평가를 위해 비정상 상태로 제방 침투에 대한 수리모형실험을 수행하였다. 제체 재료는 경상북도 구미시에 위치한 해평천의 제방 건설 현장의 재료를 사용하였고 일본식배수공은 굵은 골재와 부직포를 사용하여 실험실에 제방 축소 모형을 수조 내부에 제작하였다. 모형제방은 제방축조 방법과 유사하게 다짐을 하기 위해 흙을 쌓으면서 0.20 m 높이마다 다짐을 실시하였다. 다짐방법은 고무망치를 이용한 층다짐을 하였다. 제방 제외지에 0.55 cm/min의 속도로 수위를 증가하여 15분 간격으로 각 0.3 m, 0.4 m, 0.5 m 수위에 따른 비정상 상태의 위압계 측정을 수행하였다. SEEP/W 모형의 매개변수는 투수계수와 입도분포도, 불포화 함수특성곡선(값을 산정하기 어려움)이 있으며, 각 매개변수에 대한 민감도 분석을 수행하였다. SEEP/W 모형의 모의 결과는 수리모형실험 결과와 비교적 잘 일치함을 알 수 있었다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.138-139
• /
• 2014

In this study, conventional aggregate obtained from a ready mixed concrete factory and the aggregate with a modified grading produced in lab. condition were prepared. Results showed that a good grading of aggregate the ratio of 5~13 mm and 13~25 mm is 20~40 % produced in the lab. condition significantly improved the slump and the compressive strength of the concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.177-180
• /
• 2000

The objective of this study is to analyze the degree of surface-glossing of cement mortar with the grading of aggregate and contents of limestone powder. According to the experimental results, degree of surface-glossing of cement mortar using river sand is higher than that of crushed sand. As F.M of aggregates is less than 2.78, degree surface-flossing of cement mortar has better performance, Also, as the contents of limestone power increase, degree of surface-flossing is shown to be improved, And it shows that degree of surface-glossing decrease with elapse of age.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.509-512
• /
• 2005

This study try to apply two methodologies which from USACE and RCD research team of Japan on the mix design procedure. Firstly, a basic mix design was decided using the method of USACE. Secondly, the method of Japan RCD research team was adapted to verify the quality. From the results of this study, is impossible to guarantee the quality of RCD using the sieve distribution of the dam concrete chapter in the code of korean. So, it is recommended to apply the guideline of USACE or ASCE on the distribution of aggregate. And, more wide experimental study is necessary to establish the relationsjip between the strength and the compaction ratio, because of the difference of strength according to the ratio of compaction was more than 10$\%$

• Geotechnical Engineering
• /
• v.13 no.3
• /
• pp.63-76
• /
• 1997

To investigate the engineering characteristics of crushed rockfill material, the large-scaled triaxial tests have been carried out, The rpckfill is made from the greywacke, and the 3 parallel gradations with different maximum particle size(dmu=38.1mm, 25.4mm and 19.1mm) were designed for the test. The dimension of the specimen is 300mm in diameter and 600mm in height, and the applied confining stress varied from 5t/$51.6^{\circ}$ to 60t/$51.6^{\circ}$. The test results show that the influence of the maximum particle size on the stress -strain r$51.6^{\circ}\; to\; 40.5^{\circ}$ when the confining stress increases from 5t/$51.6^{\circ}$ to 60t/$51.6^{\circ}$ The hyperbolic parameter values estimated from the test result for rockfill are much different from the recommended values by Duncan et. at(1980) for GW and GP material, especially in the $\phi$ ad K-values.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.407-413
• /
• 2006

Artificial aggregates made by coal fly ash that is classified as an industrial by-product was tested to oxidize hydrogen sulfide under various testing conditions. For the determination of optimum condition for converting coal fly ash to aggregates, specimens were prepared by varying ratio of fly ash, cement, water content, and foaming agent. These specimens were tested to determine specific gravity, water absorption, and compressive strength. Specimens, which were used for the removal of hydrogen sulfide, were selected based on the measured specific gravity, water absorption, and compressive strength. Tests for hydrogen sulfide removal were performed via batch and column tests. Under the testing conditions used in this study, removal rates of hydrogen sulfide were linearly proportional to amounts of coal fly ash, and further increased when water was added.

• Journal of the Korea Concrete Institute
• /
• v.22 no.2
• /
• pp.159-169
• /
• 2010

A multiphysics model analysis including moisture transport, heat transfer and solid mechanics and experiments on the normal and light weight concrete were carried out in order to study the effect of preabsorbed water in the light weight aggregates on the drying and shrinkage characteristics of concrete. Consequently, with fixed water-cement ratio, loss of water content of normal and light weight concrete were compared and the results showed that the lightweight concrete lost less moist than the normal concrete in early age and long term which was by moist supply effect. Accordingly, shrinkage strain size and distribution of lightweight concrete were decreased, and shrinkage reducing effect was efficient in early age with water cement ratio 0.3 and in both early age, and long term with water cement ratio 0.5. The comparison of analysis results and exaperimental results indicate that characteristic values of moisture transport and the relation humidity and shrinkage strain from this study are resonable for application for other differential shrinkage analysis in lightweight concrete.