2중곡면 반파공의 월파 특성을 검토하기 위하여 입사파고 및 주기가 각각 다른 불규칙파를 대상으로 수리실험을 실시하였으며, 2중곡면 반파공과 직립형 구조물에 대해 동일한 조건으로 실험하여 이를 명확히 하였다. 특히 2중곡면 상부의 곡률반경에 따라 외해측으로 되돌리는 파랑의 비말효과에서 큰 차이가 있을 것에 착안하여 상부곡면부의 곡률반경이 증가한 정상 2중곡면 반파공(FSW)과 상부곡면부의 곡률반경이 감소한 역 2중곡면 반파공(IFSW)에 대해 실험을 수행하였다. 그리고 2중곡면 원호 크기의 비 B/D=0, 20%, 40%, 60% 및 80%인 경우에 대해서도 월파특성을 비교 검토하여 다음과 같은 결론를 얻었다. 1. 2중곡면 원호 크기의 비 B/D가 증가할수록 월파저지 효과가 개선됨을 확인 하였으며 최대 B/D가 0.8인 경우 0.2에 비해 50% 이상 월파유량이 감소하여 B/D의 변동에 따른 월파저지특성을 확인하였다. 2. 역2중곡면 반파공(IFSW)의 실험결과 기존 정상2중곡면 반파공(FSW)에 비하여 20%이상 월파량이 감소하고 있음을 알 수 있었으며 이는 2중곡면 상부측의 곡률 반경이 증가함에 따른 기하학적 특성에 의해 외해측으로의 되돌림 파랑(수괴)이 증가한 것으로 판단된다. 3. 동일한 마루높이에 대해 직립형 호안에 의한 월파량 비교결과 역 2중곡면 반파공(IFSW)의 경우 최대 80%이상의 월파량 저감 효과가 나타나는 것으로 검토되었다. 4. 월파저지의 측면에서 2중 곡면공에 비해 역2중 곡면공이 우수한 것으로 예측되었으나 2중곡면 반파공의 소파원리가 반파공의 원호내에서 쇄파를 야기하여 파에너지를 소멸하는 것이므로 쇄파를 유도하는 과정에서 충격쇄파압의 발생이 예측되는 바 이에 대한 계속적인 연구가 필요한 것으로 판단된다.
Proceedings of the Korea Concrete Institute Conference
/
2010.05a
/
pp.167-168
/
2010
This study considered applications of FRP panels as curved structural members. Also, curved GFRP panel with open cell type for tunnel lining was manufactured by pultrusion method through improving equipments.
The radiation pattern of conformal transducers installed on a curved surface is likely to be complicated depending on the array pattern on the curved surface. In this research, the acoustic sources constituting a conformal transducer are arrayed in equi-angle, equi-interval, and geodesic dome forms, and the radiation pattern function of each of the array geometries has been derived, and therewith the radiation pattern has been analyzed for each array geometry. Based on the analysis result, we have determined the equi-interval array geometry that provides the widest beam width with the lowest side lobe level among the three array geometries. Results of the present work are expected to be utilized to the design of conformal transducer structures.
Journal of Korean Tunnelling and Underground Space Association
/
v.12
no.6
/
pp.451-461
/
2010
Utilization of the fiber reinforced polymer (FRP) material has been enlarged as a substitution material to the general construction materials having certain long-term problems such as corrosion, etc. However, it could be difficult to apply the FRP material, which has a linear shape generally, to an arch-shaped tunnel structure. Therefore, an attempt has been made in this study to develop a device to form a designed cross section of FRP material by pulling out with a curvature. A sample of the circled FRP product was successfully produced and then the sample has been tested to identify its physical characteristics. Then, intensive feasibility studies on the circled FRP panel to be used for a tunnel lining structure have been carried out by numerical analyses. As a result, it appears that the new circled FRP-concrete composite panel has a high capability to be used for a tunnel lining material without any structural problem.
Journal of the Computational Structural Engineering Institute of Korea
/
v.20
no.2
/
pp.181-190
/
2007
The linkage framework of surface geometric modeling based on the NURBS and shell finite element analysis is developed in this study. In the geometrically exact shell finite element analysis, the accuracy of the analysis strongly depends upon the accurate computation of the surface geometric quantities. Therefore if we obtain the necessary geometric quantities from the NVRBS surface equation, it's possible to construct the effective linkage framework of surface modeling in the CAD systems and shell finite element analysis using geometrically exact shell finite element. Besides, the linkage framework can be applied to the analysis of general and complex surfaces as well as simple surfaces. In this study, the shell surfaces are generated by interpolating given set of data points based on the NURBS surfaces. These data points usually can be obtained from surface scanning. But the representations of the generated NURBS surface are not same to one another. The accuracy depends on the chosen parameterization methods used in NURBS. Therefore, it is needed to select the suitable parameterization method according to the geometry of the surfaces. To verify the performance and accuracy of our developed linkage framework, we solve several well-known benchmark problems and assess the performance of the developed method.
본 논문에서는 스윕곡면(sweep surface)을 기반으로 복잡한 3차원 물체의 형상을 변형하는 새로운 자유형상 변형(free-form deformation)기법을 제시한다. 본 논문에서 제시한 방법은 기존의 격자점(control lattices)을 조정하는 체적기반의 방법에 비해 스윕기반의 절차적 (procedural) 모델링 기법의 직관성을 활용하여 사용자에게 보다 효율적인 형상변형 기법을 제공한다. 3차원 물체의 정점들은 스윕곡면의 단면(cross-section)에 바인딩(binding) 되어 곡면의 변화에 따라 형상변형을 한다. 본 논문에서 제시한 스윕기반 형상변형 기법은 3차원 물체를 부분적으로 변형하는 기법과 계층구조를 기반으로 전반적인 형상을 변형하는 기법으로 구분된다. 부분적인 형상변형 기법은 스윕곡면을 구성하는 성분의 다단계(multi-level) 표현을 통하여 사용자에게 다중해상도(multi-resolution) 형상변형 기능을 제공한다. 계층구조에 기반한 형상변형 기법은 복잡한 3차원 물체를 위상구조에 따라 여러 계층으로 분할하고, 각 부분의 형상을 근사하는 스윕곡면들을 생성한다. 분할된 각 부분의 정점(vertices)들은 해당 스윕곡면에 바인딩 되어 스윕곡면의 단면의 변화를 따르게 된다. 이러한 상황하에서 스윕곡면들은 3차원 물체의 계층구조에 따라서 서로 상호작용(interaction)을 하게 되고, 결과적으로 3차원 물체의 각부분은 상호반응적 형상변형을 한다. 이러한 계층구조에 기반한 상호반응적 형상변형 기법은 사용자의 의도에 부합하는 보다 사실적이고 기능적인 형상변형을 가능하게 한다. 본 논문에서는 다양한 3차원 물체에 대한 실험을 통해 제시된 방법의 효율성을 입증한다. 결과 막성 사구체병증과 같은 신질환이 발견될 수 있으므로 신조직검사의 적응증에 합당한 경우 적극적인 신조직검사를 시행하여 원인 질환을 찾는 노력이 필요할 것으로 사료된다.. 남아가 75명으로 남녀비는 3.6:1을 보였다. 임상병리학적 분류상 일차성 신증후군이 89명(92.7%), 이차성 신증후군이 7명(7.3%)이었으며 일차성 신증후군에서 minimal change nephrotic syndrome이 71명으로 79.8%, focal segmental glomerulosclerosis 11.2%, mesangial proliferation 4.5%, membranoprolifrative glomeulonephritis 3.4%, membranous nephropathy 1명 1.1%이었으며 2차성 신증후군은 $Henoch-Sch\"{o}nlein$ nephritis가 3례로 가장 많았다. 미세변화 신증후군 71명 중 비재발군이 16명으로 22.5%, 비빈발 재발군 49.3%, 빈발 재발군 18.3%, 스테로이드 의존군 9.9%를 보였다. 결론 : 대전시에서의 신증후군 환아의 발생빈도는 15세이하 소아 10만명당 약 5명으로 추정되었으며 10여 년전과 비교하여 큰 변화를 보이지는 않았다. 또한 저자들의 임상병리학적 연구결과가 다른 문헌에서 보고된 소아 신증후군의 연구결과와 큰 차이를 보이지 않음을 알 수 있었다. 자극에 차이가 있지 않나 추측되며 이에 관한 추후 연구가 요망된다. 총대장통과시간의 단축은 결장 분절 모두에서 줄어들어 나타났으나 좌측결장 통과시간의 감소 및 이로 인한 이 부위의 통과시간 비율의 저하가 가장 주요하였다. 이러한 결과는 차가운 생수 섭취가 주로 결장 근위부를 자극하는
Proceedings of the Acoustical Society of Korea Conference
/
autumn
/
pp.309-312
/
2004
본 연구에서는 매미가 소형이면서도 광대역의 소리를 낼 수 있는 원리가 무엇인지를 파악하고 이중 음향 발생 장치 제작에 적용할 수 있는 요소를 도출하였다. 매미의 발음기관에서 가장 중요한 부분은 복부 공명실과 진동판이다. 복부 공명실은 위상 반전형 인클로져 시스템으로 모델링 할 수 있으며, 진동판은 돔 형태의 박판으로 볼 수 있다. 근육에서 발생된 입력 신호는 진동판의 곡면에 의해 판에 좌굴을 일으켜 높은 음압의 소리를 발생시킨다. 발생된 소리는 복부를 통해 위상이 반전되어 특정 대역이 강조된다. 진동판의 가장 큰 특징은 곡면구조에 의한 비선형적인 출력이며 이를 통하여 가진 주파수와 상이한 주파수 성분들을 효과적으로 발생시키게 된다. 이러한 구조를 음향 발생장치로 활용하기 위하여 단순한 곡면판의 기하학적 파라미터 변화에 따른 출력 변화 경향을 관찰 하였으며, 이러한 원리를 활용한 음향 발생장치를 구성하였다.
Journal of the Institute of Electronics Engineers of Korea SP
/
v.37
no.3
/
pp.17-30
/
2000
In this paper, we propose an efficient algorithm to produce 3-D surface model from a set of range data, based on NURBS (Non-Uniform Rational B-Splines) surface fitting technique. It is assumed that the range data is initially unorganized and scattered 3-D points, while their connectivity is also unknown. The proposed algorithm consists of three steps: initial model approximation, hierarchical representation, and construction of the NURBS patch network. The mitral model is approximated by polyhedral and triangular model using K-means clustering technique Then, the initial model is represented by hierarchically decomposed tree structure. Based on this, $G^1$ continuous NURBS patch network is constructed efficiently. The computational complexity as well as the modeling error is much reduced by means of hierarchical decomposition and precise approximation of the NURBS control mesh Experimental results show that the initial model as well as the NURBS patch network are constructed automatically, while the modeling error is observed to be negligible.
Proceedings of the Korean Operations and Management Science Society Conference
/
1992.04b
/
pp.545-554
/
1992
본 논문에서는 복합형상의 금형을 가공하기 위하여 필요한 공구와 가공경로를 자동으로 생성해 주는 자동공정계획(CAPP)방법을 제시한다. 금형곡면은 일반적으로 복잡한 형상의 자유곡면들의 조합으로 이루어 지는데 육면체 형상의 소재로부터 원하는 금형곡면을 가공하는데는 수십시간의 기계가공 시간이 소요되며 또한 NC Code를 준비하는데도 같은정도의 시간이 소요된다. 금형곡면의 NC가공에 있어서 또다른 어려움은 공구의 과부하와 공구간섭이 빈번하게 발생할 수 있다는 점이다. 제안하는 자동공정계획방법은 전처리, 공정계획, 공구경로 생성의 3단계로 구성된다. 자동공정계획시스템의 입력정보는 1) 생성될 곡면형상 2) 가공할 소재형상 3) 가공공구 셀(드릴, 볼 엔드밀, 플렛 엔드밀), 절삭성 데이타등이다. 전처리 단계에서는 곡면모델러로부터 생성된 입력 형상을 Z-map이라 부르는 자료구조로 변환한다. 두번째 단계에서는 절삭 가공작업의 순서가 사용되는 공구와 함께 후방순환법에 의하여 결정된다. 그리고 실제 가공될 NC공구경로가 마지막 세번째 단계에서 생성된다.
Kim, Jee-In;Na, Yoo-Mi;Kang, Joo-Won;Lee, Jae-Hong
Journal of Korean Association for Spatial Structures
/
v.12
no.1
/
pp.77-85
/
2012
The membrane structure maintains stable form by giving initial tension to ductile membrane and increasing the stiffness of exterior that is much adopted in the large span spatial structure by making its thickness thin. This kind of membrane structure has characteristic that can express free-form curve, so the selection of structural form is very important. So, this paper proposes the expression of free-form surface based on NURBS basis function and the finite element method considering geometrical nonlinearity for the deduction of large deformation result. Also, for minimizing the approximation of the surface that is derived from the form-finding result, the interface method that change finite element mesh to NURBS is proposed. So, the optimum surface of free-form membrane is derived.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.