• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.683-688
• /
• 1997

원전의 중대사고 발생시 형성될수 있는 노심용융물의 고화피막층을 동반하는 용융물의 자연대류 열절달 특성에 대한 실험결과를 정밀 분석하고, 이에 대한 해석적 연구를 수행하였다. 본 연구대상 실험은 종횡비가 작은 경우와 큰 경우에 대하여 용융물을 자연대류와 강제대류로서 냉각하는 조건에서 경계조건에 따른 용융물의 피막층 두께를 측정하였고, 피막층 주변의 열전달량을 측정ㆍ분석한 것이다. 실험결과를 정밀 분석한 결과, 용융물의 고화 피막층 형성이 용융물의 자연대류 열전달양에 많은 영향을 미쳤으며, 종횡비가 큰 경우는 냉각 조건도 자연대류 열전달 양에 다소 영향을 미치는 것으로 나타났다. 또한 고화층 두께 증가에 따른 종횡비 감소는 자연대류 열전달양 감소율을 작게하는 것으로 나타났다. 피막층 형성이 있는 용융물의 자연대류 열전달 해석 결과, 실험에서의 열손실 때문에 용융물의 고화 피막층 두께가 실험결과보다 다소 작게 나타났으며, 자연대류 열전달 흐름이 피막층 형성에 미치는 것으로 나타났다.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.179-189
• /
• 2000

The purpose of this research is to complement the existing researches on landfill bottom liners behavior during the periods of freeze and thaw. Landfill-related researches have been typically focused on small-scale soil samples that are often compacted under conditions different from those used in the field. Although these tests have been invaluable in clarifying the problem of freeze and thaw, extending the results of such experimental studies to prototype landfills are questionable. In this investigation, the author utilized a large scale laboratory simulation allowing inclusion of the field depth of the cover systems, layered soil profiles, rainfall simulation, a cold climate and boundary conditions similar to those encountered in the landfill. The soil materials were stabilized soils (mixed clays, cements, and minerals) instead of clays. The bottom liners are made up of drainage layer (30 cm), stabilized layer (75 cm), and leach collection layer (60 cm). The stabilized layers are made up of supporting layer (45 cm) and low permeable layer (30 cm) - consisting of $P_A\; and\; P_B$ layer. As a results, depths of penetration increased by about 2~5 more centimeters at rainfall simulated designs than those at no rainfall simulated designs (that is design 3, design 5 and design 7) - it increased by about 20mm/day in the bottom liners and frost heaves also increased it by a few millimeters. Also, a few cracks appeared partly. According to these results, we can surmise that the compacted stabilized soil is more reliable than the compacted clay liners for construction of the landfill liners.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.265-269
• /
• 2006

This study was to investigate the effect of acidic leachate on the landfill liner system and healing of cracks by using industrial by-products; BFS(Blast Furnace Slag) and FA(Fly Ash). From the results of pH measurement, for OPC(Ordinary Portland Cement) and DM(Dredged Mud) mixtures immersed acidic leachate, the initial pH($4.5{\sim}5.5$) was heavily increased to approximately 10 after 60 days experiment due to the production of 2 mole $OH^-$ which was occurred by hydrolysis of CaO and MgO etc.. Meanwhile, the initial pH of acidic leachate immersed DM mixtures with BFS and FA respectively was lasted for longer period as compared to the comparison. The reason was that production of low Ca C-S-H hydrates which stabilized in acidic liquid. The physical properties(compressive strength, hydraulic conductivity) of DM mixtures added BFS and FA was improved. It was concluded that the dissolution of hydrates was disturbed by high alkalinity of BFS and FA.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.241-246
• /
• 2004

매립지 차수층에는 다짐점토층이 사용되고 있지만 건조/수축, 동결/융해 등의 환경적인 영향에 대한 내구성을 향상시키기 위한 기능성 복합차수층에 대한 연구가 진행되고 있다. 본 연구에서는 원지반토양에 고화재를 첨가한 BLT층과 벤토나이트와 미생물 배양액을 첨가한 BLM 층으로 구성된 복합차수층의 차수기능과 BLM층에서 미생물 배양액 첨가에 따른 Bio-barrier 기능을 평가하였다. 원지반토양에 고화재와 벤토나이트를 각각 8, 10%(w/w)를 첨가하였r고, 미생물 배양액은 1%(v/w)을 첨가하였다. 실험결과 원지반토양은 SC계열의 토양으로 분류되었고, BLT, BLM 차수층의 8% 혼합비율에서도 1$\times$ $10^{-7}$cm/sec 보다 낮은 투수계수를 나타내었다. BLM 층에 첨가된 미생물 배양액에 의한 Bio-barrier 기능 실험결과 미생물 배양액 첨가에 의하여 침출수에 대한 내구성이 향상된 것을 확인할 수 있었다.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.1
• /
• pp.29-39
• /
• 2006

Recently, Korea brings to remarkable levels about industrialization, modernization, population and development of technology. Especially, the rapidly growing from this technology has increased the burden on existing industrial waste landfills. The purpose of this research is to existing knowledge base of landfill cover liner behavior during periods freeze/thaw. Although these tests have been invaluable in clarifying the problem of freeze/thaw, extending the results of such experimental studies to prototype landfills are questionable. For this investigation, the author utilized a large scale laboratory simulation allowing inclusion of the field depth of the cover systems, layered soil profiles, rainfall simulation, a cold climate and boundary conditions similar to those encountered in the landfill. And the soil materials used stabilized soils (mixed clays, cements, and minerals) instead of clays. The bottom liners are made up of drainage layer (30cm), stabilized layer (75cm), and leach collection layer (60cm). The stabilized layers are made up of supporting layer (45cm) and impermeable layer (30cm) - consisted of $P_A$ and $P_B$ layer.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.474-479
• /
• 2005

Experimental and theoretical studies of internal cavity pressure during injection molding of a spiral tube cavity were carried out. The frozen layer thickness and the evolution of internal cavity pressure were calculated using a commercial software (C-MOLD). The evolution of the internal cavity pressure was recorded during injection molding of polystyrene into a spiral tube mold. To explain the differences observed between the calculated and measured internal cavity pressure, a pressure correction factor (PCF) was introduced based on the plane stress theory. This factor was determined by analyzing the stress state in the melt and calculating the frozen layer thickness near the mold wall. The corrected and experimental pressures have been compared to validate the applicability of the pressure correction factor.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.3
• /
• pp.5-11
• /
• 2004

Characteristics of advective-diffusive transport of inorganic chemicals in clayey soils as well as in two hardened barrier materials of silica and lime are analyzed from the laboratory column test and compared with those of pure diffusive column test. The results show that the average dispersion coefficients of three materials are $4.39\times l0^{-10}\textrm{m}^2 /s,\; 1.98\times l0^{-10}\textrm{m}^2 /s,\; 1.99\times l0^{-10}\textrm{m}^2 /s$, respectively, and the value of clay is higher than that of hardened barrier materials. There was no significant difference between the dispersion coefficients of advective-diffusive column tests and the effective diffusion coefficients from the pure diffusive column tests, if advective velocity was lower than l0$^{-7}$$m^2$/s. The range of dispersion coefficients of advective-diffusive column tests was narrower than that of diffusion coefficients of pure diffusion tests.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.7 s.178
• /
• pp.1787-1794
• /
• 2000

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.12
• /
• pp.1327-1331
• /
• 2005

This study was to investigate the reduction of hydration heat by utilizing industrial by-products such as BFS(Blast Furnace Slag). DM(Dredged Mud) was used by parent soil and Ordinary portland cement was used by cementing material. Additive added to reduce the heat of hydration was BFS. From the results of experiment, hydration heat was decreased in accordance with the addition of BFS. The reason was that surface of BFS coated with aluminosulfate. Initial uniaxial strength was low, neither was not long term uniaxial strength. It was concluded that silica rich layer($H_2SiO_4^{4-}$) in solid phase early in the reaction of hydration was difficultly moved in liquid phase due to the increase of ZP(Zeta Potential). However, the ZP in the later hydration was decreased due to the acceleration of mobility of silica rich layer($H_2SiO_4^{4-}$). Therefore, long term physical properties such as uniaxial strength revealed.

• Resources Recycling
• /
• v.27 no.5
• /
• pp.38-48
• /
• 2018

Deep cement mixing method (DCM) is used to improve the quality of various ground type and its technical development proceeding based on performance improvements of solidification materials and mixing techniques with ground soil. In this study, it was possible to improve silty clay ground soil had 1 to 3 MPa compressive strength using solidification material that composed mainly circulating fluidized bed combustion (CFBC) power plant fly ash and reduce standard deviation of strengths from over 1.0 MPa to 0.322 MPa using improved auger bits in field test to forming more uniform bulbs than in case of using existing auger bit.