• Journal of KSNVE
• /
• v.2 no.1
• /
• pp.15-20
• /
• 1992

(1) 화약발파작업을 시작하기 전에는 필히 시험발파, 안전진단을 통해 공해 및 안전사고 발생요소들을 면밀히 분석하고 파악하여 발파공법, 천공공법, 사용폭약 의 종류, 사용약량 등을 결정하고 이에 따른 적합한 안전거리의 설정, 안전덮게, 안전망의 사용, 필요시 휀스철망 설치등의 안전조치를 완벽히 취해야겠다. 또한 현행 소음진동규제법에 의하면 폭약 사용시 7일전 신고의무 규정을 우리나라의 공사 현실을 감안해 볼 재검토 할 필요가 있다. (2) 선진국의 발파진동 기준을 우리나라 의 경우와 비교 분석해 볼때 우리나라의 경우 발파진동 안전기준은 도심지에는 대체 로 0.5cm/sec가 적당하고 고주택, 아파트 등이 밀집된 지역이나 건물지반이 특히 약한 곳은 0.2cm/sec을 적용함이 타당하다고 판단된다. 또한 도심지에서의 안전발파 를 위한 터널공법으로는 주변 생활환경 소음진동방지를 위한 심발법으로 브이 컷법 을, 여굴방지와 미려시공 등 공사시 안전사고, 소음진동을 방지하기 위한 공법으로는 슬러리, 파이 넥스 폭약을 이용한 정밀면 발파법을 권장한다. (3) 연화발사시 안전 거리를 3.deg. 기준 최소반경 129m, 12" 기준 최고 반경 200m로 설정하여야 겠다. 또한 연화발사시 발생하는 폭발 소음은 80 - 100dB 정도로써 대량으로 장시간 발사 시는 청력장해 등의 피해가 발생할 수 있으나 우리나라의 경우는 발사 총 시간이 대체로 30분을 초과하지 않으므로 관람자나 일반인들이 소음피해를 호소할 수준은 아니라고 결론지을 수 있다.수 있다.

• Journal of the KSME
• /
• v.31 no.4
• /
• pp.380-388
• /
• 1991

고에너지 속도 가공법 중에서 주요한 것을 발췌하여 그 개요와 금후의 전개에 대하여 기술하 였다. 폭발압착과 같이 실제로 활용되고 있는 기술로부터, 폭약 또는 전자기력에 의한 분말압축 성형과 같은 개발도상의 기술까지 고에너지 속도가공법의 범주에 속하는 기술분야는 광범위하다. 관용의 가공법에 비하면 역사도 짧고, 실용화에 있어서 해결하여야 할 문제도 많이 남아있다. 현재 실용화를 위한 연구도 착실히 성과를 얻고 있으며, 고에너지 속도 가공법의 앞날은 밝다고 할 수 있다. 고에너지 속도가공의 진보와 발전을 위하여는 가공기술에 관한 연구와 함께, 재료가 고속변형을 받을 때의 거동과 특성에 관한 연구를 함께 진행할 필요가 있다. 여기서는 후자의 연구에 관하여 언급하지 않았으나, 고속재료 시험법과 그 평가법, 소성도 전파 해석, 계측법 등 많은 연구 성과가 매년 보고되고 있다.

• Explosives and Blasting
• /
• v.33 no.1
• /
• pp.1-12
• /
• 2015

In this study, the domestic bench blasting sites were researched to set the blast coefficient C according to the type of rock and type of industry. With the use of the experimental data on the representative industrial explosives and the data of the manufacturers'data on explosives, powder coefficient e was set up. The blast coefficient C was 0.21~0.30 when the average value for 5 representative kinds of rocks including granite was searched. The blast coefficient C for quarrying, mining and construction sites were 0.22, 0.13 and 0.26 respectively. On the other hand, powder coefficient e was obtained in four elements such as reactive energy, ballistic mortar test, VOD, Langefors'strength per unit weight. e value for emulsion which is one of the representative explosives was found to be 1 while those of high performance emulsion and ANFO were found to be 0.9 and 1, respectively.

• Explosives and Blasting
• /
• v.30 no.2
• /
• pp.59-65
• /
• 2012

This study improved constructability and cost efficiency that are disadvantages of existing a mechanical excavation & similar blasting methods(plasma, gel, etc) and introduced cases of development and practical applications of Low vibration explosives(LoVEX) that minimizes blast vibration. The low vibration explosives(LoVEX) is suitable to Type-1 in standard blasting patterns of Ministry of Land, Transport and Maritime Affairs(MLTM) and delay blasting is possible. Moreover, the low vibration explosives improve construction and work efficiency while the level of vibration is reduced to about 60~70% of normal emulsion explosives. Additionally, this study suggested standard blasting patterns, the prediction equation of blasting vibration, and construction methods.

• Explosives and Blasting
• /
• v.28 no.1
• /
• pp.11-18
• /
• 2010

This study improved construction and cost efficiency that are disadvantages of existing low vibration crackers(low vibration cracker, plasma, etc) and introduced cases of development and practical applications of Low vibration explosives(NewFINECKER) that minimizes blast vibration. The low vibration explosives(NewFINECKER) is suitable to Type-1 among standard blasting patterns of Ministry of Land, Transport and Maritime Affairs(MLTM) and delay blasting is possible. Moreover, the low vibration explosives improve construction and work efficiency while the level of vibration is shown to be about 60~70% of normal emulsion explosives. Additionally, this study suggested standard blasting patterns, the prediction equation of blasting vibration, and construction methods.

• Clean Technology
• /
• v.20 no.4
• /
• pp.398-405
• /
• 2014

In the treatment of spent high energetic materials, the issues such as environmental pollution, safety as well as working capacity should be carefully considered and well examined. In this regard, incineration has been recommended as one of the most promising processes for the disposal of such explosives. Due to the fact that high energetic materials encompass various types and their different characteristics, the technology development dealing with various materials is not an easy task. In this study, rigorous modeling and dynamic simulation was carried out to predict dynamic physico-chemical phenomena for research department explosive (RDX). Plug flow reactor was employed to describe the incinerator with 263 elementary reactions and 43 chemical species. Simulation results showed that safe operations can be achieved mainly by controlling the reactor temperature. At 1,200 K, only thermal decomposition (combustion) occurred, whereas increasing temperature to 1,300 K, caused the reaction rates to increase drastically, which led to ignition. The temperature further increased to 3,000 K which was the maximum temperature recorded for the entire process. Case studies for different operating temperatures were also executed and it was concluded that the modeling approach and simulation results will serve as a basis for the effective design and operation of RDX incinerator.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.4
• /
• pp.32-42
• /
• 2013

We study the gap effect on detonating high explosives using numerical simulation. The characteristic acoustic impedance theory is applied to understand the reflection and transmission phenomena associated with gap test of high explosives and solid propellants. A block of charge with embedded multiple gaps is detonated at one end to understand the ensuing detonation propagation through pores and non uniformity of the tested material. A high-order multimaterial simulation provides a meaningful insight into how material interface dynamics affect the ignition response of energetic materials under a shock loading.

• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.1-14
• /
• 2019

A full scale hydrodynamic simulation that requires an accurate reproduction of shock-induced detonation was conducted for design of an energetic component system. A detailed hydrodynamic analysis SW was developed to validate the reactive flow model for predicting the shock propagation in a train configuration and to quantify the shock sensitivity of the energetic materials. The pyrotechnic device is composed of four main components, namely a donor unit (HNS+HMX), a bulkhead (STS), an acceptor explosive (RDX), and a propellant (BPN) for gas generation. The pressurized gases generated from the burning propellant were purged into a 10 cc release chamber for study of the inherent oscillatory flow induced by the interferences between shock and rarefaction waves. The pressure fluctuations measured from experiment and calculation were investigated to further validate the peculiar peak at specific characteristic frequency (${\omega}_c=8.3kHz$). In this paper, a step-by-step numerical description of detonation of high explosive components, deflagration of propellant component, and deformation of metal component is given in order to facilitate the proper implementation of the outlined formulation into a shock physics code for a full scale hydrodynamic simulation of the energetic component system.

• Tunnel and Underground Space
• /
• v.15 no.3 s.56
• /
• pp.177-184
• /
• 2005

The Sapaesan tunnel, the longest twin tube tunnel (4km) in Korea with 4 lanes each, is under construction with two years of delayed schedule because of the strong opposition from environmental bodies. Therefore, maximizing the construction efficiency was needed in tunnel project to compensate for time delay. This study includes improvements in the construction of the Sapaesan tunnel such as increasing excavation length and changing excavation sequence. In this paper the system for predicting tunnel face ahead is also introduced. Bulk-Emulsion explosive and Cylinder-Cut method were adopted in tunnel blasting to increase the excavation length. Optimum tunnel excavation step was designed to make up delayed time. Tunnel foe mapping, TSP survey and geological prediction system using computerized jumbo-drill were performed fnr safe construction of long and large twin tube tunnel.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.199-202
• /
• 2004

해양에서 연구목적으로 저주파 음원으로 사용하고 있는 폭발성 음원(SUS: Signals, Underwater Sound)의 신호특성을 파악하기 위해 1999년 9월에 동해의 대륙사면에서 1마일에서 80 마일까지 약 1에서 5마일의 정해진 간격으로 SUS를 투하하여 발생된 음향신호를 거리 및 수신수심별로 수신하였다. 주파수 필터를 사용하여 분석한 결과, 1 kHz이상의 고주파수 성분이 폭발시에 먼저 방출되며 저주파수 신호는 뒤이어 발생됨을 확인하였다. 이것은 폭약이 폭발시에 일어나는 메카니즘과 관련이 있는 것으로 사료된다. 거리의 증가에 따라 잔향의 영향을 받아 뒤이어 수신되는 파속(wave packet)들을 확인할 수 있었으며, 신호에 많은 영향을 주고 있었으나 잔향 분석은 여기서는 제외하였다. 본 연구는 실해역에서의 SUS신호에 관한 많은 자료를 분석한 것으로서 그 신호특성에 관한 이번 고찰은 해양음파전달시 사용하는 SUS 음향신호 해석에 많은 도움을 줄 것으로 기대한다.