• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.7-17
• /
• 1992

The acid stronger than $H_0=-11.93$, which corresponds to the acid strength of 100% $H_2SO_4$, is known as superacid. However, solid superacid catalysts have many advantages such as an easy separation of products from catalyst, the repeated uses and regeneration of catalysts, as compared with liquid superacids. In this paper, the kinds of solid superacids, the preparation methods, and their applications for chemical reactions are introduced.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.18-23
• /
• 1992

Three solid acid catalysts developed recently are reviewed. Cloverite is a gallophosphate molecular sieve with very large pore, titanium silicate has a specific structure compared with conventional molecular sieves, and Envirocat is prepared for the replacement of aluminium chloride catalyst.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.114.2-114.2
• /
• 2010

Fisher-Tropsch 반응을 통하여 생성되는 왁스는 황 또는 질소 성분을 포함하지 않으며 또한 방향족 및 중금속 성분이 없기 때문에 청정 수송유로써 사용이 가능하다는 장점이 있다. 그러나 Fisher-Tropsch 왁스는 그 분자량이 매우 큰 사슬형 탄화수소이기 때문에 수소첨가 분해반응을 통하여 중질유 range의 탄소수를 갖는 탄화수소로의 전환 기술이 반드시 필요하다. 이러한 수소첨가 분해반응에 사용되는 촉매는 강한 산점을 지니고 있는 양이온 교환 지르코니아가 대표적이라 할 수 있는데 최근 들어 강한 산점과 높은 산밀도, 그리고 기공의 모양과 크기에 따라 특정 반응이 제어되거나 활성화되는 형상선택성을 가지고 있기 때문에 다양한 반응에 촉매로 사용되는 제올라이트에 Pt 등의 귀금속을 담지한 촉매를 사용하여 Fisher-Tropsch 왁스의 전환율 및 중질유분의 선택도를 높이는 기술에 대한 연구가 활발히 진행되고 있다. 따라서 본 연구에서는 다양한 제올라이트 촉매에 귀금속을 담지하여 촉매를 제조하고 1L 급 고압 배치형 반응기를 이용하여 Fisher-Tropsch 왁스의 수소첨가 분해반응에 의한 중질유 제조 실험을 수행하고 그 결과를 고찰하였다.

• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.478-481
• /
• 2015

In this study, the hydrolysis of green macro-algae Enteromorpha intestinalis using solid acid catalyst was conducted to obtain total reducing sugar. The hydrolysis was optimized with four reaction parameters of liquid-to-solid (L/S) ratio, catalyst amount, reaction temperature, and reaction time. As a optimized result, the highest TRS of 7.74 g/L was obtained under condition of 7.5 L/S ratio, $140^{\circ}C$, 15% catalyst amount and 2 hr. By the way, at this condition, only 0.13 g/L 5-HMF was detected. The solid acid-catalyzed hydrolysis of marine resources had the potential in the field of bioenergy.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.902-912
• /
• 1996

In the skeletal isomerization of 1-pentene over various solid acid catalysts, we have studied catalytic reactivity, selectivity, reaction mechanism and the relation between acid strength of catalysts and catalytic activity. Natural zeolite shows highest activity among the all catalysts and the modified ${\eta}$-alumina with fluorine and sulfuric acid shows higher activity than unmodified ${\eta}$-alumina. The yield of isopentene increases with increasing temperature and increasing contact time. However the cracking products increase at the high temperature and very high contact time. In addition, the activity of natural zeolite exchanged with metal cation decreases and shows good relation with the polarizing power of metal cation. According to the result of ammonia TPD, the acid strength of catalysts has an effect on catalytic activity.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.279-285
• /
• 2008

The etherification of 2-naphthol with ethanol has been carried out over various solid acid catalysts. CNS, CNSWS, SCMS, MCF, and SBA-15 with and without sulfonic acid were used in this study as solid acid catalysts. The conversion of 2-naphthol and the selectivity of 2-naphthyl ethyl ether were obtained at reaction temperature = $180^{\circ}C$, $LHSV=1h^{-1}$, ethanol/2-naphthol molar ratio = 20 using a fixed-bed down flow reactor. The conversion of 2-naphthol and the selectivity of 2-naphthyl ethyl ether over silica group catalysts were higher than them over carbon group catalysts. The conversion of 2-naphthol was 70-90% and the selectivity of 2-naphthyl ethyl ether was more than 90% over silica group solid acid catalysts. It was performed XRD, SEM, TEM, and $NH_3-TPD$ to characterize solid acid catalysts.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.109.2-109.2
• /
• 2011

바이오디젤의 생산은 원료유의 순도와 촉매 종류, 알코올의 양, 반응시간, 반응 온도와 같은 다양한 조건을 이용하여 최적의 조건을 찾아내는 것이 중요하며 이는 곧 생산단가와 직결된다. 바이오디젤 전환 시 고체촉매를 이용하면 후처리 공정의 단순화가 가능하며 글리세린의 순도가 약 98%로 매우 높아져 고부가 물질 생산 원료로 활용이 가능하다는 장점이 있으며 생산 단가를 4~20% 가량 낮출 수 있다. 본 연구에서는 바이오디젤의 경제적인 생산을 위하여 정제공정을 단순화 시킬 수 있는 방안으로 3종의 고체촉매를 이용하여 동 식물성 유지의 바이오디젤로 전환 실험을 수행 하였다. 촉매 활성화를 위하여 고체촉매를 $700^{\circ}C$에서 3~5시간 소성하고 동 식물성 유지를 이용 전이에스테르화 반응실험을 수행하여 30분 간격으로 시료를 수집 하였다. 실험 결과, 동물성 폐유지로부터 반응 120분 후에 최대 90% 이상의 지방산 메틸에스테르로의 전환율을 얻을 수 있었으며 식물성 유지인 팜유에서는 86%, 유채유에서는 64%의 전환율을 나타냈다. 동 식물성 유지의 초기 산가는 0.45~2mg KOH/g 사이로 나타났다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.512-512
• /
• 2009

본 연구는 자유지방산을 포함하고 있는 저품위 유지로부터 바이오디젤을 합성하는데 있어서 외부가열 방법 대신에 마이크로파를 이용한 내부 직접가열 방법으로 고체촉매 반응을 가속화한 연구에 관한 것이다. 대두유를 원료로 KOH 균일촉매를 이용한 전이에스테르화 실험에서는 섭씨 60도 상압조건에서 반응시간 3분에 95.4%의 전환율을 획득했다. 올레산과 고체산촉매를 이용한 자유지방산 제거 실험에서는 섭씨 60도 상압조건에서 solvent free 방식의 S-ZrO2는 반응시간 20분만에 93.7%의 제거율을 보였고 Rohm&Hass사의 Amberlyst-15dry 촉매는 반응시간 30분에 82.0%의 제거율을 보였다. 또한 바이오디젤 합성에 사용된 마이크로파의 총 에너지를 측정한 결과 외부가열 방법에 비해 약 1/3 수준임을 확인했다. 이것은 기존의 heat bath를 이용한 실험결과들과 비교할 때 반응속도가 약 10배 정도 향상되면서도 에너지효율이 높다는 것을 확인한 결과로서, 저품위 유지를 원료로 하는 바이오디젤 생산공정에서 마이크로파가 매우 효율적인 가열수단이 될 수 있음을 보여주었다.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.162-170
• /
• 1993

Vapor-phase ETBE(ethyl tert-butyl ether) synthesis from TBA(tert-butyl alcohol) and ethanol was carried over solid acid catalysts such as heteropoly acids and proton type zeolites. Heteropoly acids were more active than proton type zeolites and $H_4SiW_{12}O_{40}$ catalyst showed about the same activity as Amberlyst-15 ion exchange resin catalyst used as an industrial catalyst in ETBE synthesis. The catalytic activity of transition metal exchanged heteropoly acids was greatly enhanced, because new acid site was generated with hydrogen reduction. This effect of hydrogen reduction was related to the reduction characteristics of catalysts and the order of reducibility was $Ag^+$>$Cu^{2+}$>$Fe^{2+}$.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.583-588
• /
• 2010

Esterification of free fatty acid with methanol to biodiesel was investigated in a batch reactor using various solid acid catalysts, such as polymer cation-exchanged resins with sulfuric acid functional group(Amberlyst-15, Dowex 50Wx8), acidic ionic liquids (ILs)-modified silica gels respectively with $-SO_3H$ and $-SO_2Cl$ functional group ($SiO_2-[ASBI][HSO_4]$, $SiO_2-[ASCBI][HSO_4]$) and grafted silica gels respectively with $-SO_3H$ and $-SO_2Cl$ functional group ($SiO_2-R-SO_3H$, $SiO_2-R-SO_2Cl$). The effects of reaction time, temperature, reactant concentration(molar ratio of methanol to oleic acid), and catalyst amount were studied. Allylimidazolium-based ILs on modified silica gels were superior to other tested solid acid catalysts. Especially, the performance of $SiO_2-[ASBI][HSO_4]$ (immobilized by grafting of 3-allyl-1-(4-sulfobutyl)imidazolium hydrogen sulfate on silica gel) was better than that of a widely known Amberlyst-15 catalyst at the same reaction conditions. A high conversion yield of 96% was achieved in the esterification reaction of the simulated cooking oil at 353 K for 2 h. The high catalytic activity of $SiO_2-[ASBI][HSO_4]$ was attributed to the presence of strong Brønsted acid sites from the immobilized functional groups. The catalyst was recovered and the biodiesel product was separated by simple processes such as decantation and filtration.