• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.226-228
• /
• 1998

PBMA_DP 프로토콜은 우선순위에 따른 수락 확률을 변화시켜준다. 수락 확률수치는 요구슬롯(R-slot)의 개수에 영향을 받는다. 따라서 부하가 많아지면 R-slot의 개수를 줄이고, 부하가 적어지면R-slot의 개수를 늘려 성능의 향상을 꾀할 수 있다. 따라서 본 논문에서는 동적으로 R-slot의 개수를 바꾸어주는 알고리즘 두 가지를 제안한다. R-slot위치는 고정시키고 개수만 변화시키는 방식과 R-slot 위치를 변화시키면서 개수도 변화시키는 방식이다. 또한 단말의 개수를 예측하는 방법에 대해 간단히 설명한다. 위의 두 방식에 대한 모의 실험을 시행하여 성능분석을 행한다.

• 한국게임학회지
• /
• v.6 no.1
• /
• pp.61-63
• /
• 2009

가상환경에서 다양한 객체 요소들이 휴먼 캐릭터와 서로 상호작용을 한다. 이것은 휴먼 모션 애니메이션에 영향을 준다. 기본모션데이터는 동적, 고정된 객체의 접촉 상태, 지면과의 관계에 따라 영향을 받는다. 모션이 적절히 수정되지 않으면 불규칙, 비합리적인 표현이 생성될수 있다. 본 논문은 모션 데이터 커브를 추적하고 적절히 장애물 객체의 속성을 포함하는 관절데이터를 추적한다. 상호작용의 결과에 적절히 응답하여 데이터를 수정한다. 본 논문은 애니메이션 시나리오상에서 상호작용하는 객체를 위한 동적 제어 메커니즘을 설계하는 기법을 제시한다. 특정한 규칙을 이용하여 의사 결정할 수 있는 지능형 에이젼트에 기반한 구조로 에이젼트 시스템을 제안한다.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2567-2572
• /
• 2007

The suppression of fluid force acting on a square prism near plane wall was studied by attaching fences on the corners of the prism. The height of the fence was 10% of the square width and the range of Reynolds number considered was Re=$2.0{\times}10^4$. The experimental parameters were the attaching position and numbers of fences, the space ratios G/B(G/B=0.1${\sim}$1.2) between prism and plane wall. The average drag coefficients were increased and the average lift coefficients were decreased and increased with the space ratios toward plane wall. The drag of the prism was reduced average 7.6% with the space ratios by attaching the normal fence at the rear and upper corner and the horizontal normal fence at the rear and lower corner on the prism. In this case, the separated flow at the front and upper corner was reattached on the upper side of the prism and the vortex streets between the prism and plane wall were appeared more slowly than that of prism without fences.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.12a
• /
• pp.125-131
• /
• 2004

LiDAR 데이터의 필터링은 원 데이터로부터 건물, 수목 등과 같은 비지면점을 제거하는 과정이며, 이러한 필터링을 통해 DEM을 생성할 수 있다. 대표적인 필터링 방법들로는 분산을 이용한 linear prediction 기법, 주변 점들과의 경사관계를 이용한 slope-based 기법, morphology 필터, local maxima 필터 등이 있으며 이러한 기존의 기법들의 단점을 보완하기 위한 연구가 활발히 진행되고 있다. 대부분의 필터링 기법들은 필터의 크기(윈도우의 크기)와 같은 인자를 대상 지역에 적합하게 사용자가 직접 설정해주어야 한다. 더욱이 복잡한 지형, 지물이 존재하는 지역에 적용하기 위해서는 인자를 변형시켜줘야 하며 특히, 다양한 크기의 건물이 존재하는 지역에 대하여 적용하기 위해서는 가변적인 크기의 필터가 필요하다. 이에 본 논문에서는 다양한 크기의 건물이 존재하는 지역에 대하여 필터의 크기를 변화시키지 않고 필터링을 수행할 수 있는 연산기법을 제안하였다. 본 연구에서는 수목이나 자동차 등과 같은 작은 개체의 제거를 위해 고정된 작은 크기의 윈도우를 가지는 모폴로지 필터를 우선 적용한다. 그 후 건물과 같은 큰 개체의 포인트는 이웃 포인트와의 고도차이를 이용하여 인식하고 이웃에 위치하는 지면 포인트로 대체하며, 갱신된 값이 바로 다음 연산에 반영 되도록 한다. 또한 상, 하, 좌, 우 네 방향에 대하여 라인별로 독립된 연산을 수행한 후에 이들을 비교함으로써 오차를 보정한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.672-680
• /
• 2017

A solar photovoltaic system is composed of a module mounting structure, supporting trunk, and a control unit that supplies generated electrical power to an external power grid or a load. The efficiency of the system depends on the incident solar light, so the mounting structure is installed to face the sun. However, because the sun always moves, systems that track the sun have better efficiency than fixed systems. The structure experiences wind pressure, snow load, seismic load, and structure weight. The wind pressure has the most serious effect on the structure. The pressure was obtained using finite element method for various gaps between modules and angles between the panel and the ground. The wind pressure is lowest when the gap is zero, and it increases with the inclination angle. Based on the results, a mounting structure module was designed.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.5
• /
• pp.381-389
• /
• 2011

In this study, we are focusing our attention on lift characteristics of the low aspect wings for Wing-In Ground effect crafts (WIG). Experimental measurements at an open-type wind tunnel are carried out and results are comparatively presented. In order to simulate the realistic ground condition in where the WIG craft is flying, moving ground is implemented by a conveyor belt rotating with the same velocity of the inflow. We consider two different wings (NACA0012 and DHMTU section) which have four different aspect ratios (0.5, 1.0, 1.5 and 2.0). Forces acting on the wings are measured and lift characteristics are elaborately investigated for various different conditions. In addition, end-plate effects are estimated. Results are validated by comparing with theoretic solutions of the symmetric airfoil. Present results show that ground effects are differently generated in moving or fixed ground conditions, and hence left characteristics are affected by the ground condition. Consequently, accurate aerodynamic forces acting on the WIG craft are guaranteed in a realistic moving ground condition.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.4
• /
• pp.29-36
• /
• 2012

In order to create a wind resource map, we need wind data, contour map and roughness map. Moving Filter technique was applied to Udo of Jeju Island to improve the accuracy and efficiency of creating roughness map based on the Land Cover Map of the Ministry of Environment. The Land Cover Map was simplified using moving filtering, and the roughness map was created with this Land Cover Map. The wind resource map was created using this roughness map. Finally, we verified the validity and application of moving filter technique for wind resource map. As a result, the wind map which was created using the roughness map with moving filtering showed bias values which were all negative. It means the wind map is underestimated to values of wind energy and RMSE values were also from 0.0237m/s to 0.0253m/s at 50m height. In other words, estimation of wind resource using image filtering provides reliable results at 80m height typically when the wind turbine is installed. Finally, we found that image filtering technique is very useful tool to make wind resource map.

• Journal of Bio-Environment Control
• /
• v.17 no.3
• /
• pp.188-196
• /
• 2008

Single span pipe greenhouses (pipe houses) are widely used in Korea because these simple structures are suitable for construction by farmers thus reducing labor cost. However, these pipe houses are very weak and frequently damaged by heavy snow and strong wind. Pipe house is constructed by pipe fabricator, which is anchored to the ground by inserting each pipe end into ground to $30\sim40cm$, so the ground support condition of pipe end is not clear for theoretical analysis on greenhouse structure. This study was carried out to find out the suitable ground support condition needed f3r structural analysis when pipe house was designed. The snow and wind loading tests on the actual size pipe house were conducted to measure the collapsing shape, displacement and strain. The experimental results were compared with the structural analysis results for 4 different ground support conditions of pipe ends(fixed at ground surface, hinged at ground surface, fixed under ground and hinged under ground). The pipe house under snow load was collapsed at the eaves as predicted, and the actual strain at the windward eave and ground support under wind load was larger than that under snow load. The displacement was the largest at the hinged support under ground, followed by the hinged at ground surface, the fixed under ground and then the fixed at ground surface independent of displacement direction and experimental loading condition. The experimental results agreed most closely with the results of theoretical analysis at the fixed condition under ground among 4 different ground support conditions. As the results, it was recommended that the pipe end support condition of single span pipe greenhouse was the fixed under ground for structural analysis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.4_1
• /
• pp.9-21
• /
• 1992

The effectiveness of the isolation system installed at the base of the primary structure and at the support of the substructure mounted on the primary structure is evaluated for reducing of structural responses under different earthquakes in this paper. The structural responses are analyzed to identify its behavior due to the input motion characteristics such as various peak acceleration and frequency content. Three analytical models are used to evaluate the effectiveness of the isolation system in this study as follows: fixed-base primary structure with support-fixed substructure, base-isolated primary structure with support-fixed substructure, and fixed-base primary structure with support-isolated substruciure. A computer code (KBISAP) is used for numerical integration of equation of motion considering the interaction between the primary structure and the secondary structure. The matrix condensation technique and constant average acceleration method are utilized in this program. And also, the effective stiffness of the base-isolator on reducing the structural response are evaluated for various earthquakes through the relationship of the acceleration - displacement.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.818-823
• /
• 2011

6-generalized coordinates of absolute translational displacements and angular displacements measured at Cartesian coordinates system fixed at the ground has been used to describe general dynamic behavior of a rigid body in mechanical systems. However, track coordinates system moving with the centerline of the track can be used to develop dynamic formulations for railway vehicle. It is easy to impose the constraints of track coordinates by the virtue of track coordinates system moving with track centerline. In this analysis, dynamic equations of railway vehicle by using track coordinates system is derived and the simulation results are presented.