• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.883-888
• /
• 2012

Recently, the logistics industry in Asia is growing rapidly mostly with Chinese economic development. A variety of studies have been carried out to reduce the logistic cost under the situation that the global freight traffic continues to increasing. The Short Sea Shipping(SSS) system, a multi modal transport system centered around coastal shipping to realize high value-added logistics, achieved considerable success in EU. To implement the SSS system in Korea, it is necessary to develop the various essential technologies related to development of efficient ships and port facilities, including equipment for loading and unloading containers, operating and managing systems for freight terminals and technologies for tracking and securing containers. The present paper focuses on the survey of the current essential technologies available for implementation of the SSS system and suggests the direction of future development in the technologies.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1312-1317
• /
• 2013

Pseudolite is a contraction of the term "pseudo-satellite", used to refer to something that is not a satellite which performs a function commonly in the domain of satellites. Pseudolite are most often small transceivers that are used to create a local, ground-based GPS alternative. Pseudo-range measurement of pseudolite has around 300m range error, when time synchronization error of $1{\mu}sec$ occurs. Therefore the time synchronization methods play an important part in navigation augmentation using pseudolite. This paper proposes three clock synchronization methods that are installation method of pseudolite station, method using KRISS-UTC and method using PRN code phase difference for pseudolite. The simulation platform structure is presented for evaluating proposed clock synchronization performance.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.92-96
• /
• 2007

전라남도 국민참여형 위성영상 블로그 시스템은 2006년도 행정자치부 자치단체정보화지원사업의 일환으로 구축된 것으로서， 사용자가 고해상도 위성영상 위에 직접 자신의 글，사진， 동영상을 올리고，이를 다른 사용자나 시스템과 공유할 수 있도록 구축된 시스템이다. 본 시스템이 궁극적으로 구현하고자 했던 과제는 다음과 같다. (1)지리정보 혹은 기타 정보의 고정성을 탈피하고，(2)지리정보와 멀티미디어 자료의 효율적 통합을 통해 geoUCC를 구축하며，(3)사용자의 참여를 통한 지리정보 제공 방식의 쌍방향성을 구현하여，(4) 사용자를 일방적 자료 활용자에서 자료 생성자로 발전시키고 궁극적으로는 자치단체와 국민 간 새로운 방식의 소통 방식을 생성하는 것이다. 본 시스템 구축의 결과로서 본 시스템에서 일반 국민에게 서비스되는 내용은 다음과 같다. (1) 전라남도 전역의 1m급 고해상도 위성영상의 대국민 서비스，(2)전라남도 전역에 대한 지번 단위까지의 주소 검색 서비스，(3)웹 상에서의 실시간 3차원 GIS 서비스，(4)Web2.0의 철학을 반영한 RSS, Trackback 및 Tag 검색 기능，(5)사용자가 직접 고해상도 위성영상 위에 자신의 글， 사진，동영상，홈페이지 등을 올릴 수 있는 "위성영상 블로그 쓰기 기능"，(6)국내 거의 모든 포털 사이트의 블로그와 홈페이지를 지원하는 시스템 연계(퍼가기) 기능 등이다. 결론적으로 본 시스템의 사용자는 고해상도 위성영상 기반의 지도 위에 자신의 여행기，사진， 동영상을 올림으로써 자신만의 사용자제작콘텐츠(UCC)를 생성할 수 있을 뿐만 아니라， 이를 다른 사용자와 공유， 활용함으로써 실질적인 쌍방향，참여형 지리정보시스템을 이용하게 된 것이다.

• Journal of Korea Port Economic Association
• /
• v.26 no.3
• /
• pp.165-174
• /
• 2010

DEA converts multiple inputs and outputs of a decision unit into a single measure of performance, generally mentioned as relative efficiency. DEA has been applied successfully as a performance evaluation tool in many fields including manufacturing, banks, pharmacies, and hospitals to name a few. This paper applies the input-oriented DEA model, DEA/Window analysis, and Malmquist indices to the 9 regions in Korea to measure the efficiency and productivity. The empirical results show the following findings. First, the super efficiency indicate that efficiency of Group 2 is greater than Group 1. Second, Malmquist indices show that productivity of Group 2 is less than Group 1. Third, DEA/Window of Group2 show that Chungnam is most stable, while Jeonnam is most unstable.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1511-1519
• /
• 2010

In this paper, we proposed and analyzed a RSSI based cooperative localization algorithm considering wireless propagation characteristics in indoor and outdoor environments for wireless sensor networks, which can estimate the BN position. The conventional RSSI based estimation scheme has low precision ranging due to instability propagation characteristics by time variable. Hence, we implemented ray-launching simulator for analysis of propagation characteristics in 4 case, and experimented proposed localization scheme with 4 RN and 1 to 5 BN. Simulation results show that NLCA has estimation error as 2m-3.5m, however, proposed CLA/ECLA has 1.3m-2.5m/0.5m-1.2m by same environments. Therefore, if we can consider channel characteristics, the proposed algorithm provides higher localization accuracy than RSSI based conventional one.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.295-295
• /
• 2010

생체 식립형 임플란트의 경우 성공도는 매식체의 골유착 정도에 크게 영향을 받는다. 골유착 시 임플란트의 표면 형상과 하중, 골질의 양 등 많은 요인에 영향을 받게 되므로, 임플란트의 안정성을 주기적으로 점검해야할 필요가 있다. 따라서 임플란트 안정성을 공진 주파수 분석법을 이용하여 측정하기 위해 압전소자 제작과 트랜스듀서의 구조를 설계하였다. 유한요소 해석을 통하여 압전소자와 트랜스듀서의 두께와 크기 변화를 통해 측정 주파수 범위를 10kHz대역으로 맞추었으며, 해석 결과를 토대로 샘플제작과 평가를 실시하였다. 평가 결과 시뮬레이션 해석결과와 유사한 10kHz의 주파수 대역을 가지는 것을 볼 수 있었고, 식립된 나사의 고정도가 증가할수록 주파수가 점차 증가하는 결과를 얻을 수 있었다.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.511-516
• /
• 2019

The purpose of this study was to investigate the factors influencing on the denture satisfaction in the elderly with removable denture in Jeonju(N=157). The average of denture satisfaction was 3.62. As for denture satisfaction per sub-factors was in order of masticatory satisfaction(3.81), fixation satisfaction(3.66) and general satisfaction(3.46). The convergence factors on the denture satisfaction were the perceived oral health state, leisure activity, monthly pocket money, and visiting dental clinic. As a result, the influencing factors of denture satisfaction were general characteristics of denture wearers rather than denture related characteristics. Therefore, it is necessary to pay attention to the social factors(leisure life, economy level, etc.) of denture wearers in order to increase the denture satisfaction.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.5
• /
• pp.397-403
• /
• 2007

Insect and birds in nature flap their wings to generate fluid dynamic forces that are required for locomotion. To develop a feasible flapping MAV, it is of crucially important to study the fundamental relations between flapping motion and thrust generation. In this paper, the onset conditions of the thrust generation of a heaving flat plate is investigated using a Lattice-Boltzmann method. For a fixed heaving amplitude of h/C=0.5, the effect of reduced frequency on the thrust generation is investigated. For several values of heaving amplitude(h/C=0.25, 0.325, 0.50), the effect of reduced frequency on the thrust generation is also investigated. It can be said that Strouhal number is more important rather than reduced frequency in case of thrust generation. It is found that the critical Strouhal number over which the flat plate starts to produce thrust is around 0.1. Thrust is an exponential function of the Strouhal number.

• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.113-122
• /
• 2011

Visual images are very close to our living and we make decisions and choose behavioral options with the visual images on mass media. In current-affair documentary programs, interviews have potential effects that can change public opinions on important issues. Therefore, it's a consequence that the study examined how different expressions of visual images in documentary. Using preceding research methods, this study focus on form, color, movement and depth of visual images. This study analyzed quantitatively all interview shots with 15 current-affair documentary programs from major TV stations such as KBS, MBC and SBS. The findings of the study are 1) half of interview shots used the visual image expressions to hide interviewees' face according to the shield law, 2) choosing close-up shots in company with bust shots, 3) using natural lights and hand-held camera techniques for interviews, and 4) showing wide angles without depths of visual image.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.5
• /
• pp.685-691
• /
• 2013

A load-cell-type anemovane operates based on wind vector properties. The developed load-cell-type anemovane is of a fixed type in which the wing does not rotate, unlike in the case of existing anemovanes. The load-cell-type anemovane is required to accurately derive the correlation between the load ratio and the wind direction in order to develop a qualified product. This is because the load ratio repeats every $90^{\circ}$ owing to the use of four load cells, and its value varies nonlinearly according to the wind direction. In this study, we compared analytical results with experimental results. Fluid analysis was carried out using ANSYS CFX. Furthermore, the prototype was tested using a self-manufactured wind tunnel. The wind direction was selected as the design variable. 13 selected wind direction conditions ranging from $0^{\circ}$ to $90^{\circ}$ with an interval of $7.5^{\circ}$ for analysis were defined. Furthermore, 10 wind direction conditions with an interval of $10^{\circ}$ for the experiment were defined. We derived the relations between the pressure ratio and the wind direction through the experiment and fluid analysis.