• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.128-132
• /
• 2010

울릉분지 북동쪽 독도 주변 해역은 해수면 위의 작은 섬들과 해저에 큰 화산체로 구성된 독도와 해수면 아래 큰 규모의 해산 두 개(심흥택해산, 이사부해산)가 위치하고 있으며 그 중 해수면위로는 독도만 솟아 있다. 정밀해저면영상기(MS-1000)를 이용하여 큰 규모의 조사선으로 접근이 어려웠던 동도-서도 주변 연안에 대한 정밀해저면영상 조사를 2010년 1월에 소형조사선을 이용하여 수행하였다. 부두 동쪽 해안은 동도와 근접하고 있어 큰 규모의 돌출 암반이 많이 분포하고 있으며 부두 북쪽으로는 모래층의 연흔구조가 많이 나타나며 소규모의 암반 및 자갈들이 많이 분포하는 것으로 판단된다. 동도와 서도사이의 해저면영상을 분석해보면 동도 선착장부근으로는 모래퇴적물의 연흔구조가 많이 나타나고 동도와 서도 중앙부로 가면서 모래보다는 작은 자갈들이 많이 분포하며 서도쪽으로 가면서는 모래 및 자갈퇴적물이 암반구조로 이루어져있는 것으로 판단된다. 정밀해저면영상기(MS-1000)는 고정밀한 해저면영상을 획득할 수 있으며 불규칙한 지형으로 기존 장비가 접근하없어지며기 어려운 해저지형에도 사용하기 적합한 것으로 판단된다. 향후 항구 및 해안구조물 등과 같은 고정밀해저면영상이 필요한 분야에 활용성이 높을 것으로 생각되고 또한 유지/보수가 필요한 수중 군시설 및 부두시설에 대한 정밀조사를 통하여 효율적 관리 정보제공할 수 있을 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.388-392
• /
• 2015

본 연구에서는 고정하상 직하류부에서 발생하는 국부세굴현상을 분석하기 위해서 이동상 수리실험을 수행하였다. 순환식 유량공급이 가능한 개수로 실험장치에 아크릴로 제작된 사각형 모형을 설치하고 하류에 균일한 입경의 모래를 설치하여 다양한 수리조건과 시간변화에 따른 하상고의 변화를 측정하였다. 그리고 측정된 하상고 자료로부터 시간별 최대세굴심의 크기를 산정하여 분석하였다. 그 결과 세굴심의 상류부 경사는 일정한 값으로 유지되었고, 최대세굴심과 세굴공 길이, 최대세굴심 발생거리는 시간변화에 따라 증가폭이 점차적으로 감소하였다. 또한 세굴심의 시간변화식의 기울기와 경계지점에서의 수심평균 상대난류강도값과의 관계를 분석하였다. 세굴공 내에서는 하상근처에서 후류가 발생하고, 수심방향으로 유속편차가 극심하게 증가하는 분리전단층이 발생하였다. 본 연구에서 분석된 최대세굴심의 시간적 변화양상과 세굴심 내부에서 발생하는 흐름 및 난류강도 분포특성을 보다 면밀히 분석하여 세굴심의 발달에 영향을 미치는 인자를 이용하여 향후 적절한 세굴심의 예측식을 개발할 수 있고, 최대세굴심을 저감할 수 있는 방안을 제안할 수 있다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.1
• /
• pp.165-172
• /
• 2002

Generally, the steel rigid frame has been analyzed using finite element analysis tools. While many efforts have been poured into the understanding and accurate prediction for the nonlinear behavior of the columns and beam-columns connections, the base of the columns are modeled as simply hinged or fixed. However, the base of the steel columns practically is neither fixed not hinged. It behaves as semi-rigid. In this paper, the supports of the columns we modeled as semi-rigid and the importance of such approach in moment-resisting columns is evaluated. Two typical buildings designed by the US specification are modeled and analyzed by the finite element based on stiffness method and flexibility method. The column bases of three-story buildings are modeled as rotational springs with a varying degree of stiffness and strength that simulates the semi-rigidity of the base. Depending on the degree of stiffness and strength, the semi-rigidity varies from the hinged to the fixed. Buildings with semi-rigid column bases behaves similarly to the building with fixed bases. It has been numerically observed through the pushover and nonlinear time history analyses that the decrease of the stiffness of the column base induces the rotational demand on the int air beams. an increase of rotation demands on the first store connections and lead to a soft-story mechanists Due often to the construction and environmental effects, undesired reduction of column base stiffness may cause an increase of rotation demands on the first store connections and lead to a soft-story mechanism.

• Journal of Life Science
• /
• v.23 no.12
• /
• pp.1471-1476
• /
• 2013

The present study deals with the immobilization of Kluyveromyces lactis ${\beta}$-galactosidase on a weak ionic exchange resin (Duolite A568) as polymer support. ${\beta}$-Galactosidase was immobilized using the adsorption method. A kinetic study of the immobilized enzyme was performed in a packed-bed reactor. The adsorption of the enzyme followed a typical Freundlich adsorption isotherm. The adsorption parameters of k and n were 14.6 and 1.74, respectively. The initial rates method was used to characterize the kinetic parameters of the free and immobilized enzymes. The Michaelis-Menten constant ($K_m$) for the immobilized enzyme (120 mM) was higher than it was for the free enzyme (79 mM). The effect of competitive inhibition kinetics was studied by changing the concentration of galactose in a recycling packed-bed reactor. The kinetic model with competitive inhibition by galactose was best fitted to the experimental results with $V_m$, $K_m$, and $K_I$ values of 46.3 $mmolmin^{-1}mg^{-1}$, 120 mM, and 24.4 mM, respectively. In a continuous packed-bed reactor, increasing the flow rate of the lactose solution decreased the conversion efficiency of lactose at different input lactose concentrations. Continuous operation of 11 days was conducted to investigate the stability of a long-term operation. The retained activity of the immobilized enzymes was 63% and the half-life of the immobilized enzyme was found to be 15 days.

• Journal of Environmental Science International
• /
• v.6 no.1
• /
• pp.61-67
• /
• 1997

Heavy metal adsorption by microbial cells is an alternative to conventional methods of heavy metal removal and recovery from metal-bearing wastewater The waste Sac-chuomyces cerevisiae is an inexpensive, relatively available source of biomass for heavy metal biosorption. Biosorption was investigated by free and immobilized-S. cerevisiae. The order of biosorption capacity was Pb>Cu>Cd with batch system. The biosorption parameters had been determined for Pb with free , cells according to the Freundlich and Langmuir model. It was found that the data fitted reasonably well to the Freundlich model. The selective uptake of immobilized-S. cerevisiae was observed when all the metal ions were dissolved in a mixed metals solution(Pb, Cu, Cr and Cd). The biosorption of mixed metals solution by immobilized-cell was studied in packed bed reactor. The Pb uptake was Investigated in particular, as it represents one of the most widely distributed heavy metals in water. We also tested the desorption of Pb from immobilized-cell by us- ing HCI, $H_2SO_4$ and EDTA.

• Microbiology and Biotechnology Letters
• /
• v.17 no.6
• /
• pp.611-618
• /
• 1989

Effects of methionine on cephalosporin C(CPC) production in a fluidized-bed bioreactor were investigated using bioparticles of Cephalosporium acremonium. Since methionine was found to be an important metabolic regulator on the synthesis of cephalosporin C, the effects of its concentration in the cuture broth and feeding mode to the bioreactor were studied. It was observed that the presence of initial methionine was essential for higher cephalosporin C production and there existed an optimal content of methionine. Carbon consumption rate also increased significantly under the presence of methionine. Production of cephalosporin C was most active when methionine was exhausted in the broth; however its additional feeding did not enhance the antibiotic production in the fluidized-bed bioreactor as much as expected. It was therfore considered important to feed an optimal content of methionine at the early operating stage for a higher cephalosporin C production in a fluidized-bed bioreactor. An interesting thing to note was that titre of the antibiotic with reused bioparticles was about 2 times higher in the methionine containing medium than that without methionine. Therefore repeated use of bioparticles, with an optimal content of methionine, was believed to be very useful to enhance to process productivity.

• Clean Technology
• /
• v.16 no.4
• /
• pp.277-283
• /
• 2010

Eosin Y is used a colorant and dye but eosin Y is harmful toxic substance. In this study, the adsorption characteristics of granular activated carbon have been investigated for the adsorption of eosin dye dissolved in water. The effects of initial dye concentration, contact time, pH and temperature on adsorption of eosin by a fixed amount of activated carbon have been studied in batch adsorber and fixed bed. The adsorptivity of activated carbon for eosin Y were largely improved by pH control. When the pH was 3 in the sample, the eosin Y could be removed 99% of initial concentration (10 mg/L). The adsorption equilibrium data are successfully fitted to the Freundlich isotherm equation in the temperature range from 293 to 333 K. The estimated values of k and ${\beta}$ are 19.56-134.62, 0.442-0.678, respectively. The effects of the operation conditions of the fixed bed on the breakthrough curve were investigated. When the inlet eosin Y concentration is increased from 10 to 30 mg/L, the corresponding adsorption breaktime appears to decrease from 470 to 268 min at bed height of 3 cm and a constant flow rate of 2 g/min. When the initial eosin Y flow rate is increased from 1 to 3 g/min, the corresponding adsorption breaktime appears to decrease from 272 to 140 min at bed height of 3 cm and inlet concentration of 10 mg/L. Also, breaktime increased with increasing bed height at flow rate of 2 g/min and inlet concentration of 10 mg/L. And length of adsorption zone showed similar patterns.

• Journal of the Korean Magnetics Society
• /
• v.13 no.3
• /
• pp.91-96
• /
• 2003

Cross-geometrical Cr/Co/Al-Ox/Co/Ni-Fe tunnel junctions were fabricated by magnetron sputtering. To form an insulating layer, The Al layer was oxidized in an atmosphere of oxygen-argon mixture at low power after deposition. To enhance the coercivity of the bottom Co layer, The Cr seed layer was deposited on the glass and it led to increase in coercivity. The coercivity increase is due to the increase of roughness through the Cr thickness. In over oxidation time, the oxidation of Co bottom layer and flat interface of insulator can increase the bottom Co coercivity. But TMR ratio gradually decrease. TMR ratio is relevant with Cr thickness, insulator thickness, and oxidation time. The maximum TMR ratio was 14% at room temperature and the TMR ratio was decreased to half at 0.51 V.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.5
• /
• pp.75-82
• /
• 2008

In this study, the possibility of vibration control of high-rise building structures by applying top-story isolation has been investigated. To this end, El Centro NS (1940) earthquake load is applied to 20- and 50-story building structures for numerical analysis. Artificial wind loads are used to evaluate the serviceability of example structures against wind vibration. As the number of isolated stories of example buildings is changed, structural responses has been evaluated to investigate optimal isolated building mass. And the natural period of isolation systems for top-story isolation is varied to investigate the improvement of control performance compared with the fixed base structure. Based on the analytical results, the top-story isolation system can be used as a hued mass damper and effectively reduce the structural responses of high-rise buildings against wind and seismic loads.

• Land and Housing Review
• /
• v.14 no.1
• /
• pp.1-16
• /
• 2023

This study examines the housing-related characteristics of unmarried youth using occupational history data from the 10th-14th (2016-2020) youth panel (YP2007) of the Korea Employment Information Service, and the characteristics of housing and employment. Their effect on marriage intention was empirically analyzed. The results of the analysis show that highly educated people, high-wage workers, household heads or economically independent young people, and young people in good financial conditions have a high willingness to marry. Their economic conditions are very important factors. Among the young employed who have become economically independent from their parents, full-time permanent workers, workers at large corporations, and highly waged youth showed a strong desire to get married. On the contrary, young people who are insecure temporary/daily workers, workers at small firms, and low-wage workers show a low willingness to marry. In conclusion, the results imply that young people who are in a vulnerable state in the labor market are giving up or delaying their marriage. Therefore, it is necessary to enhance policies to provide better employment opportunities for youth and, simultaneously, revamp the policy measures to enhance housing conditions.