• Journal of the Korean Society of Radiology
• /
• v.17 no.1
• /
• pp.63-69
• /
• 2023

In head and neck radiation therapy, the thermoplastic immobilization mask used for fixing the patient's posture and reproducibility causes scattered rays by being in close contact with the skin. To investigate the increase in skin dose due to the scattered rays generated from the immobilization mask, we evaluated dose reduction by decreasing contact between face skin and immobilization mask in computerized radiotherapy planning system with CT scanned images. In addition, to confirm the reproducibility problem of the setup due to the decrease in the cover area of immobilizing, the difference of each setup was confirmed using DRR and CT images. As the mask area covered for immobilizing was reduced, the dose on the skin surface significantly decreased, and it was confirmed that there was no significant difference in reproducibility even if the entire face was not covered and fixed.

• Progress in Medical Physics
• /
• v.21 no.1
• /
• pp.86-92
• /
• 2010

The purpose of this study was to measure curvature contour skin dose using radiochromic film and TLD for a conventional open field. We also attempted to quantify the degradation of skin sparing associated with use of immobilization devices for high energy photon beams and to calculate the skin dose with a help of Monte Carlo (MC) simulation. To simulate head-and-neck and shoulder treatment, a cylindrical solid water phantom 11 cm in diameter was irradiated with 6 MV x-rays using $40{\times}40\;cm^2$ field at 100 cm source axis distance (SAD) to the center of the phantom. Aquaplastic mesh mask was placed on the surface of the cylindrical phantom that mimicked relevant clinical situations. The skin dose profile was obtained by taking measurements from $0^{\circ}$ to $360^{\circ}$ around the circumference of the cylindrical phantom. The skin doses obtained from radiochromic film were found to be 47% of the maximum dose of $D_{max}$ at the $0^{\circ}$ beam entry position and 61% at the $90^{\circ}$ oblique beam position without the mask. Using the mask (1.5 mm), the skin dose received was 59% at $0^{\circ}$ incidence and 78% at $80^{\circ}$ incidence. Skin dose results were also gathered using thin thermoluminescent dosimeters (TLD). With the mask, the skin dose was 66% at $0^{\circ}$ incidence and 80% at $80^{\circ}$ incidence. This method with the mask revealed the similar pattern as film measurement. For the treatments of the head-and-neck and shoulder regions in which immobilization mask was used, skin doses at around tangential angle were nearly the same as the prescription dose. When a sloping skin contour is encountered, skin doses may be abated using thinner and more perforated immoblization devices which should still maintain immoblization.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.68-69
• /
• 2001

스테레오 물체 추적을 위해서는 추적 물체의 현재 위치를 추출하는 것이 선행 되어야한다. 입력된 좌측 영상과 이전 프레임에서 얻은 윈도우 마스크(window mask)의 기준 영상간에 식 (1)의 MSE 알고리즘을 적용하였다. 여기에서 윈도우 마스크의 기준 영상은 초기에만 추적을 원하는 물체를 마스크로 잡아(locking) 초기화 시켜 주면, 이후에는 스스로 계속 갱신(update)하게 된다. (중략)

• Journal of radiological science and technology
• /
• v.40 no.1
• /
• pp.63-70
• /
• 2017

The purpose of this study was compare to the patient setup deviation of two different type thermoplastic immobilization masks for glottis cancer in the intensity-modulated radiation therapy (IMRT). A total of 16 glottis cancer cases were divided into two groups based on applied mask type: standard or alternative group. The mean error (M), three-dimensional setup displacement error (3D-error), systematic error (${\Sigma}$), random error (${\sigma}$) were calculated for each group, and also analyzed setup margin (mm). The 3D-errors were $5.2{\pm}1.3mm$ and $5.9{\pm}0.7mm$ for the standard and alternative groups, respectively; the alternative group was 13.6% higher than the standard group. The systematic errors in the roll angle and the x, y, z directions were $0.8^{\circ}$, 1.7 mm, 1.0 mm, and 1.5 mm in the alternative group and $0.8^{\circ}$, 1.1 mm, 1.8 mm, and 2.0 mm in the alternative group. The random errors in the x, y, z directions were 10.9%, 1.7%, and 23.1% lower in the alternative group than in the standard group. However, absolute rotational angle (i.e., roll) in the alternative group was 12.4% higher than in the standard group. For calculated setup margin, the alternative group in x direction was 31.8% lower than in standard group. In contrast, the y and z direction were 52.6% and 21.6% higher than in the standard group. Although using a modified thermoplastic immobilization mask could be affect patient setup deviation in terms of numerical results, various point of view for an immobilization masks has need to research in terms of clinic issue.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.12
• /
• pp.2975-2980
• /
• 2015

Edge detection is one of image processing techniques applied for a variety of purposes in a number of areas and it is used as a necessary pretreatment process in most applications. Detect this edge has been conducted in various fields at domestic and international. In the conventional edge detection methods, there are Sobel, Prewitt, Roberts and LoG, etc using a fixed weights mask. Since conventional edge detection methods apply the images to the fixed weights mask, the edge detection characteristics appear somewhat insufficient. Therefore in this study, to complement this, preprocessing using gray-level transformation function and algorithm finding final edge using maximum and minimum value of estimated mask by local mask are proposed. And in order to assess the performance of proposed algorithm, it was compared with a conventional Sobel, Roberts, Prewitt and LoG edge detection methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1867-1873
• /
• 2015

Edge detection is one of image processing techniques applied for a variety of purposes in a number of areas and it is used as a necessary pretreatment process in most applications. In the conventional edge detection methods, there are Sobel, Prewitt, Roberts and LoG, etc using a fixed weights mask. Since conventional edge detection methods apply the images to the fixed weights mask, the edge detection characteristics appear somewhat insufficient. Therefore in this study, an algorithm for detecting the edge is proposed by applying the cross mask based on the center pixel and up, down, left and right mask based on the surrounding pixels of center pixel in order to solve these problems. And in order to assess the performance of proposed algorithm, it was compared with a conventional Sobel, Roberts, Prewitt and LoG edge detection methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10A
• /
• pp.830-837
• /
• 2003

The interests of HEO is growing due to the congestion of GSO. ITU-R is studying about the pfd for HEO FSS in the 4GHz and 11GHz bands that will adequately protect the FS and, at the same time, will better reflect HEO FSS satellite requirements. We simulated and analysed the interference effects from the USAKU-H2 type of HEO FSS system into the FS receive station in these bands. Based on our analysis, we evaluated if the pfd masks proposed in ITU-R provided the appropriate protection to the FS located at near latitude 40$^{\circ}$N.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.177-177
• /
• 2010

본 연구에서는 반도체용 Si wafer에 마스크 공정 및 slit etching 공정을 적용하여 목표인 30um 이하의 Probe unit을 개발하기 위해 Deep Si Etching(DRIE) 장비를 이용하여 식각 공정에 따른 특성을 평가하였다. 마스크는 Probe block 조립에 적합한 패턴으로 설계 하였으며, slit의 에칭된 지점에 pin이 삽입될 수 있도록 그 폭을 최소한으로 설계하였다. 30um pitch와 20um pitch의 마스크를 각각 설계하여 포토공정에 의해 마스크패턴을 제작하였으며, 식각공정 결과 식각율 5um/min, profile angle $89^{\circ}{\pm}1^{\circ}$로 400um wafer의 양면관통 식각을 확인하였으며, 표면 및 단면 식각특성을 조사하였다.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_1
• /
• pp.725-733
• /
• 2020

The objectives of this study were (1) to develop a temporal mask map using MCD12Q1 data, and (2) to extract the annual variations in paddy, (3) to investigate the correlation analysis between MYD13Q1 NDVI and rice yield, and (4) to review its applicability. For these purposes, the temporal mask map was created using annual MCD12Q1 PFT data from 2002 to 2019, and compared with the fixed mask map. As a result, it found that the temporal mask map well reflected the variations of the paddy area. In addition, the correlation coefficient between NDVI and rice yield was also high significant as compared to the fixed mask map. Therefore, the temporal mask map will be useful for NDVI extraction, crop monitoring, and estimation of rice yield.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2005.06a
• /
• pp.121-125
• /
• 2005