• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.6
• /
• pp.72-84
• /
• 2000

The test patterns for path delay faults consist of two patterns. So in order to test the delay faults, a new weight generation algorithm that is different from the weight generation algorithm for stuck-at faults must be applied. When deterministic test patterns for weight calculation are used, the deterministic test patterns must be divided into several subsets, so that Hamming distances between patterns are not too long. But this method makes the number of weight sets too large in delay testing, and may generate inaccurate weights. In this pater, we perform fault simulation without pattern partition. Experimental results for ISCAS 89 benchmark circuits prove the effectiveness of the new weight generation algorithm proposed in this paper.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.9
• /
• pp.275-284
• /
• 2016

The software used in the nuclear safety field has been ensured through the development, validation, safety analysis, and quality assurance activities throughout the entire process life cycle from the planning phase to the installation phase. However, this evaluation through the development and validation process needs a lot of time and money, and there are limitations to ensure that the quality is improved enough. Therefore, the effort to calculate the reliability of the software continues for a quantitative evaluation instead of a qualitative evaluation. In this paper, we propose a reliability evaluation method for the software to be used for a specific operation of the digital controller in a nuclear power plant. After injecting weighted faults in the internal space of a developed controller and calculating the ability to detect the injected faults using diagnostic software, we can evaluate the software reliability of a digital controller in a nuclear power plant.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4A
• /
• pp.379-386
• /
• 2007

In this paper, we propose an efficient diagnosis algorithm for multiple stuck-at faults. Because of using vectorwise intersections as an important metric of diagnosis, the proposed diagnosis algorithm can diagnose multiple defects in single stuck-at fault simulator. In spite of multiple fault diagnosis, the number of candidate faults is drastically reduced. For identifying faults, the variable weight, positive calculations and negative calculations are used for the matching algorithm. To verify our algorithm, experiments were performed for ISCAS85 and full-scan version of ISCAS89 benchmark circuits.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.79-81
• /
• 2004

본 논문에서는 전력시스템의 정적 안전도수준(Steady-state Security Level)을 평가할 수 있는 안전도 지수를 전력시스템의 영향을 반영하는 가중치를 고려하여 보다 개선된 안전도 지수를 제안한다. 먼저, N-1선로사고를 가정하여 각 선로가 계통에 미치는 영향과 각 선로의 사고로 인해 모선 전압의 변동량을 분석하여 각각 안전도 지수들의 가중치를 산정한다. 이때, 가중치의 표준화를 위해 분포도(Distribution Chart)를 활용한다. 가중치가 적용된 안전도 지수는 이를 고려하지 않은 안전도 지수보다 더욱 계통상황을 잘 반영할 것이며, 전력계통 운영 상태를 나타내는 중요한 지표로서 활용될 수 있을 것이다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.3
• /
• pp.315-321
• /
• 2014

This paper presents an integrated chassis control system with fail safety using optimum yaw moment distribution for a vehicle with steer-by-wire and brake-by-wire devices. The proposed system has two-level structure: upper- and lower-level controllers. In the upper-level controller, the control yaw moment is computed with sliding mode control theory. In the lower-level controller, the control yaw moment is distributed into the tire forces of active front steering(AFS) and electronic stability control(ESC) with the weighted pseudo-inverse based control allocation(WPCA) method. By setting the variable weights in WPCA, it is possible to take the sensor/actuator failure into account. In this framework, it is necessary to optimize the variables weights in order to enhance the yaw moment distribution. For this purpose, simulation-based tuning is proposed. To show the effectiveness of the proposed method, simulations are conducted on a vehicle simulation package, CarSim.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.9
• /
• pp.29-37
• /
• 1998

In weighted random pattern testing it is an important issue to find the optimal weight sets for achieving a high fault coverage using a small number of weighted random patterns. In this paper, a new weight set optimization algorithm is developed, which can generate the optimal weight sets in an efficient way using the sampling probabilities of deterministic tests patterns. In addition, the simulation based method of finding the proper maximum Hamming distance is presented. Experimental results for ISCAS 85 benchmark circuits prove the effectiveness of the new weight set optimization algorithm and the method of finding the proper maximum Hamming distance.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.9 s.351
• /
• pp.59-63
• /
• 2006

With the increasing complexity of VLSI devices, more complex faults have appeared. Many methods for diagnosing the single stuck-at fault have been studied. Often multiple defects on a foiling chip better reflect the reality. So, we propose an efficient diagnosis algorithm for multiple stuck-at faults. By using vectorwise intersections as an important metric of diagnosis, the proposed algorithm can diagnose multiple defects using single stuck-at fault simulator. In spite of multiple fault diagnosis, the number of candidate faults is also drastically reduced. For fault identification, positive calculations and negative calculations based on variable weights are used for the matching algorithm. Experimental results for ISCAS85 and full-scan version of ISCAS89 benchmark circuits prove the efficiency of the proposed algorithm.

• Journal of Digital Convergence
• /
• v.11 no.12
• /
• pp.431-438
• /
• 2013

In this paper we proposed a intelligent recommendation processor that the type of auto parts failures that may occur in the checkout process is represented by association relationship and the relationship was implemented with ontology. For this purpose, we defined 10 kinds of failure types and their associated parts, and we designed to simulate the recommendation process of five views. For components to be checked with the type of fault, it was possible to be expansion recommendation to the intelligent by controlling the weight value according to the relationship on the components.

• Journal of the Korea Convergence Society
• /
• v.13 no.1
• /
• pp.23-30
• /
• 2022

The failure of the reefer container causes a great loss of cost, but the current reefer container alarm system is inefficient. Existing studies using simulation data of refrigeration systems exist, but studies using actual operation data of refrigeration containers are lacking. Therefore, this study classified the causes of failure using actual refrigerated container operation data. Data imbalance occurred in the actual data, and the data imbalance problem was solved by comparing the logistic regression analysis with ENN-SMOTE and class weight with the 2-stage algorithm developed in this study. The 2-stage algorithm uses XGboost, LGBoost, and DNN to classify faults and normalities in the first step, and to classify the causes of faults in the second step. The model using LGBoost in the 2-stage algorithm was the best with 99.16% accuracy. This study proposes a final model using a two-stage algorithm to solve data imbalance, which is thought to be applicable to other industries.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.20_21
• /
• 2009

전력거래소는 국내 유일하게 한국의 전력계통을 실시간으로 감시 제어하고, 계통의 안전성을 평가 후 최적으로 운용하기 위해 2002년부터 현 EMS 시스템을 운용해 오고 있다. 초기 모든 계통해석의 근간이 되는 상태추정의 운용을 위해 계통모델과 필요 취득 데이터를 대폭 정비하였다. 현재는 154kV 무인 변전소의 탭을 추가취득 하고 모든 아날로그 취득데이터의 그룹별 가중치 조정에 의한 상태추정 등 계통해석의 정도개선 노력을 지속적으로 추진해오고 있다. 또한 상정고장 개소와 발변전소 3상 단락 고장 개소를 대폭 확대 정비하여 예상되는 모든 고장에 급전원이 신속히 대처할 수 있도록 하였다. 또한 무효전력 제어를 통한 계통손실 최소화 방안의 합리적 도출을 위한 최적화 기능의 실시간 계통운용 등 괄목한 성과를 거두었다. 본고에서는 이들 EMS 계통해석 기능을 중심으로 현재의 활용실태와 미래의 방향에 대하여 소개하고자 한다.