• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.9
• /
• pp.44-53
• /
• 1999

Generating diagnostic test patterns for combinational circuits remain to be a very difficult problem. For example, ISCAS85 c7552 benchmark circuit has 100 million fault pairs, Thus, we need more sophisticated algorithm to get more information. A new diagnostic algorithm for test pattern generation is suggested and implemented in this paper. DIATEST algorithm based on PODEM is also implemented for comparison to the new algorithm. These two algorithms have been applied to ISCAS85 benchmark circuits. Experimental results show that (1) both algorithms achieve fault pair coverage over 99%, (2) total test length of the new algorithm is much shorter than that of DIATEST, and (3) the new algorithm gives much more information used for making diagnostic dictionary, diagnostic decision tree or diagnostic test system despite DIATEST is faster than the new algorithm.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.3
• /
• pp.367-372
• /
• 2008

In this paper we proposed a model of a fault diagnosis expert system with high reliability to compare identical well-functioning motors. The purpose of the survey was to determine if any differences exit among these identical motors and to identify exactly what these differences were, if in fact they were found. Using measured data for many identical brushless dc motors, this study attempted to find out whether normal and fault can be classified by each other. Measured data was analyzed using the State Transition Model (STM). Based on a proposed STM method, the effect of a different normal state is minimized and the detection of fault is improved in identical motor system. Experimental results are presented to prove that STM method could be a useful tool for diagnosing the condition of identical BLDE motors.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.5
• /
• pp.73-81
• /
• 1996

In multiprocessor systems with multiple processors and memories, efficient communication between processors and memories is critical for high performance. Various types of multistage networks have been proposed. The economic feasibility and the improvements in both computing throughput and fault tolerance/diagnosis have been some of the most important factors in the development of these computer systems. In this paper, we present an efficient algorithm for the diagnosis of generalized cube interconnection networks with a fan-in/fan-out of 2. Also, using the assumed fault model present total fault diagnosis by generating suitable fault-detection and fault-location test sets for link stuck fault, switching element fault in direct/cross states, including broadcast diagnosis methods based on some basic properties or generalized cube interconnection networks. Finally, we illustrate some example.

• Journal of Convergence for Information Technology
• /
• v.9 no.10
• /
• pp.101-107
• /
• 2019

This paper proposes a method for detecting faults in conveyor systems used for transportation of raw materials needed in the thermal power plant and cement industries. A small drone was designed in consideration of the difficulty in accessing the industrial site and the need to use it in wide industrial site. In order to apply the system to the embedded microprocessor, hardware and algorithms considering limited memory and execution time have been proposed. At this time, the failure determination method measures the peak frequency through the measurement, detects the continuity of the high frequency, and performs the failure diagnosis with the high frequency components of noise. The proposed system consists of experimental environment based on the data obtained from the actual thermal power plant, and it is confirmed that the proposed system is useful by conducting virtual environment experiments with the drone designed system. In the future, further research is needed to improve the drone's flight stability and to improve discrimination performance by using more intelligent methods of fault frequency.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.99-104
• /
• 1998

In this paper I designed test pattern generator which will be completely detected the faults of multi-stage Logic Circuit. 1 generated this pattern using the test pattern generation Logic Circuit. The generated test patterns compared with the exhausted testing was decreased pattern. This test pattern generator will detect the all single stuck-at faults in the multi-stage Logic Circuit. The choice of which of the many I.C testing methods to use can have a effect on the success or failure of the fault detected. One of the most important considerations is cost and designed test pattern generator is very low cost type.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.157-158
• /
• 2007

본 논문에서는 산업전반에 걸쳐 널리 사용되는 유도전동기의 고장상태를 검출하기 위해 DFT(Discreet Fourier Transform)와 LDA에 기반을 둔 진단 알고리즘을 제안하고자 한다. 실험에 의해 측정된 전류값을 DFT에 의해 시간공간에서 주파수 공간으로 변환한 후에 LDA기법을 이용하여 특징벡터를 산출한 후 거리 유사도에 의해 진단이 수행된다. 제안된 방법의 타당성을 보이기 위해 여섯 가지의 고장을 대상으로 다양한 조건하에서 실험한 결과 기존 방법에 비교하여 우수한 결과를 나타냈다.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.31 no.3
• /
• pp.39-46
• /
• 2002

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2031-2033
• /
• 2003

본 논문에서는 25%, 50%, 75%, 100% 정격 부하 아래에서 b유도전동기의 회전자 고장을 검출하기 위한 효과적인 FFT 기반 알고리즘을 제안하였다. 제안한 방법은 고정자 전류 스펙트럼 성분 중에서 회전자 고장에 큰 영향을 주는 주파수 성분에서 미리 결정한 기준벡터와 특정벡터 사이의 평균 절대치 차이(Mean Absolute Difference)를 이용하였다. 기준벡터는 정상 상태의 고정자 전류 스펙트럼 성분 중에서 기본 주파수 상, 하의 두개의 측파대 주변의 좁은 영역에서 추출하였고 특징벡터는 정상상태와 회전자 바 고장상태의 고정자 전류 스펙트럼 성분 중에서 또한 기준벡터와 동일한 영역에서 추출하였다. 부하실험을 통하여 제안한 알고리즘의 적용 결과는 각각의 정격 부하에서 유도전동기의 회전자 바 고장을 효과적으로 검출할 수 있음을 입증하였다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.1
• /
• pp.31-38
• /
• 2011

Faults of motor drive systems to be used for various industrial applications can cause serious problems. In this paper, a method to diagnose switch open fault of a voltage-fed PWM inverter is proposed. The proposed method normalizes dq current and fault-detection and first classification are performed by mean values of dq phase currents, second classification is performed by features such as the relation of dq phase currents, the ranges of those, the positions of those according to the results, and fault switch is diagnosed with the results. The proposed method performs the simulation for diagnosis of inverter switch open faults with MATLAB and identifies the feasibility of the proposed method. Because the proposed method is implemented by simple algorithms, the proposed algorithm can be embedded in general induction motor drive systems and be used.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.29-35
• /
• 2019

As the fourth industrial revolution is emerging, many companies are increasingly interested in smart factories and the importance of sensors is being emphasized. In the case that sensors for collecting sensing data fail, the plant could not be optimized and further it could not be operated properly, which may incur a financial loss. For this purpose, it is necessary to diagnose the status of sensors to prevent sensor' fault. In the paper, we propose a scheme to diagnose digital-sensor' fault by analyzing the rising time and falling time of digital sensors through the LSTM(Long Short Term Memory) of Deep Learning RNN algorithm. Experimental results of the proposed scheme are compared with those of rule-based fault diagnosis algorithm in terms of AUC(Area Under the Curve) of accuracy and ROC(Receiver Operating Characteristic) curve. Experimental results show that the proposed system has better and more stable performance than the rule-based fault diagnosis algorithm.