• Journal of the Korean Wood Science and Technology
• /
• v.48 no.5
• /
• pp.732-744
• /
• 2020

In this study, a torrefaction of Quercus serrata to manufacture a molded charcoal was performed, investigated material properties, fuel characteristics, and performed a quantitative analysis of hazardous gases which occur during a combustion process. In addition, a molded charcoal in market was selected as a control group, and a comparative analysis was performed. As a result, the higher heating value (HHV) of the torrefied specimen was about 14% higher than that of molded charcoal, and its ash content was about 51 times lower. Moreover, after performing a quantitative assessment of hazardous gases (carbon monoxide, nitrogen oxide, and sulfur dioxide) which were produced when each specimen was combusted for 900 seconds in an enclosed chamber, it was confirmed that the maximum value of generated amount of carbon monoxide on the torrefied specimen was about 50 times lower than that of the existing molded charcoal. Therefore, it was shown that the torrefied specimen produced in this study had a higher heating value than the molded charcoal in the market, and a very low amount of carbon monoxide generated during the combustion process.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.107.2-107.2
• /
• 2011

억새는 척박한 토양 조건에서도 쉽게 자라며 관리가 용이하다는 장점이 있어 바이오에너지 작물로 주목을 받고 있다. 억새는 주로 Miscanthus sacchariflorus(물억새)와 Miscanthus sinensis(참억새) 그리고 두 억새의 잡종인 Miscanthus giganteus로 구분되며, 최근 기존의 억새보다 생체량을 크게 늘린 거대억새가 개발되기도 하였다. 본 실험에서는 우리나라 전역에서 가장 흔하게 볼 수 있는 물억새와 참억새를 유동층 반응기를 이용하여 급속열분해 하였다. 본 연구의 목적은 억새로부터 얻은 바이오원유와 나무로부터 얻은 바이오원유의 특성을 비교하고, 시료투입속도의 변화를 주어 억새로부터 얻은 바이오원유의 수율과 특성을 알아보고자 함이다. 시료의 투입속도는 200g/h, 300g/h, 500g/h, 1000g/h로 변화를 주었으며, 반응온도($500^{\circ}C$), 공탑속도(0.19m/s), 응축기온도($10^{\circ}C$)는 매 실험마다 동일하게 유지하였다. 수집한 바이오원유는 공업분석을 통해 연료로서의 가치를 알아보았다. 목재를 급속열분해 한 경우 바이오원유의 수율은 56.03wt.%로 동일한 조건에서 억새를 급속열분해 한 경우 보다 약 6wt.%가량 높았다. 바이오원유의 발열량은 큰 차이가 없었으나 수분과 점도에서 큰 차이를 보였다. 투입속도가 증가할수록 바이오원유의 수율은 증가하는 경향을 보였으며, 시간당 1000g을 투입하였을 때는 수율이 감소하였으나 수율의 변화는 크지 않았다. 투입속도가 증가하는 경우 바이오원유의 고위발열량과 점도는 감소하고 수분이 증가하는 경향을 보였다.

• Journal of Energy Engineering
• /
• v.9 no.1
• /
• pp.1-9
• /
• 2000

공정연계를 최소호하는 IGCC 시스템에 대한 개념설계를 수행하였다. 공정분석은 상용코드인 ASPEN PLUS를 이용하였다. 가스화기의 적절한 운전조건을 찾기위하여 가스화기를 경계조건으로 하는 액서지 민감도분석을 통하여 투입되는 슬러리와 산소의 조건을 결정하였다. 또한 , 생성가스 냉각시 현열을 최대한 회수학 ldn하여 , 열교환망을 통하여 급수를 에열하고 가스화플랜트의 각 부분에 공급하도록 공정을 구성하였다. 여분의 가열된 급수는 갑압증발시켜 복합사이클에서 동력을 생성시키는데 사용되어진다. 이와 같은 시스템은 , 가스터빈 -ASU-가스화플랜트의 공기에 의한 공정연계와, HRSG-가스냉각 및 정제시스템 간의 증기연계를 가능한 적게함으로써 공정의 운전성과 경제성을 최적으로 유지할 수 있다. 본 연구에서 제시하는 공정의 경우에, 열효율이 약 39%(고위발열량 기준)으로 나타났으며, 단위 기기 및 단위공정들의 최적화를 통하여 40%의 효율달성이 가능할 것이다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.1
• /
• pp.23-33
• /
• 2017

In this study, water and organic treatment efficiency and operating characteristics (temperature, salinity effect) were evaluated when food waste with high water content was treated by Bio-dying method. In addition, the optimum conditions for producing pellets for evaluating the decomposition products as SRF(Solid Refuse Fuel) after Bio-drying and evaluating the use value of SRF as a solid fuel were analyzed. As a result, the temperature, $CO_2$ concentration, organic matter removal rate and weight reduction rate according to the daily dose were about 86% and 68% at the input of 2.4 kg/day. The optimal food waste input was estimated to be 2.4 kg/day. As a result of the pellet molding and produce, Pellets can be produced within 10~25% of raw material water content. It was judged that the water content of 25%, which showed the best quality results in terms of external shape maintenance and strength. The high calorific value of SRF of decomposition products after Bio-drying was more than 3,500 kcal/kg.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.231-243
• /
• 2014

In this study, the potential of biomass, which is generated from oil palm cultivation and crude palm oil (CPO) production of Indonesia was assessed in the aspect of energy content. The types of oil palm biomass were classified on the basis of the cultivation stage and the CPO production stage. In the cultivation stage, biomass is considered to be produced from its' root, trunk and frond. Other possible biomass resources such as empty fruit bunch (EFB), palm kernel shell (PKS) and fiber were included in the CPO production stage. As results, total biomass from damaged plantation area of Indonesia was estimated to be annually from 3 million to 16 million tons in 2011. From CPO mills, approximately 49 million tons/yr of biomass residues were estimated to be annually occurred. Their total energy content from each biomass source in cultivation stage was analyzed to be from 593,000 to 3,197,000 TOEs in terms of gross calorific value. In the case of CPO mills, around 22.7 million TOEs was estimated to be potential energy producible by biomass based on gross calorific value of dry basis. If moisture content considered, net calorific value was analyzed to be decreased to 16.3 million TOEs. Based on the results, the total energy contents of all oil palm biomass were estimated to be up to 25,919,000 TOE in terms of gross calorific value. CPO : Crude Palm Oil, EFB : Empty Fruit Bunch, FFB: Fresh Fruit Bunch, PKS : Palm Kernel Shell, OPF : Oil Palm Frond, PKOC : Palm Kernel Oil Cake, ISPO : Indonesia Sustainable Palm Oil Commission, TOE : Tone of Oil Equivalent.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.3
• /
• pp.65-74
• /
• 2008

In this study, the composition and physico-chemical characteristics of municipal solid waste (MWS) which was treated in four different area were investigated. It is necessary to measure the characteristics of MSW to build a waste treatment and Refuse Derived Fuel (RDF) facility, the data-base and total managing of the landfill. It was found that the average density of solid wastes is in the range of $78.15-199.8kg/m^3$. This MSW was composed of 8.87% of food wastes, 38.8% of papers, 34.12% of plastics & vinyls, 7.16% of textiles, 0.96% of wood, 1.3% of rubber & leathers and others, respectively. Most of MSW are composed of food, paper and plastic waste and more than 94% was combustible waste. For three components, moisture is 17.38%, combustible component is 69.03% and ash is 6.24%. The chemical element has the high order of carbon, oxygen, hydrogen on the dry basis of wastes. And the low heating value of the MSW which is measured by calorimeter is calculated as 2973.8 kcal/kg and high heating value of the MSW is calculated as 5209.94 kcal/kg.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.2
• /
• pp.101-111
• /
• 2009

In this study, the physico-chemical characteristics of municipal solid waste (MWS) which was treated in gangwon area were investigated. It is necessary to measure the characteristics of municipal solid waste for build a waste treatment and RDF facility and for data-base and total managing of the landfill. It was found that the average density of solid wastes is in the range of $101.8{\sim}199.8kg/m^3$. This MSW was composed of 30.7% of food wastes, 36.3% of papers, 15.8% of plastics & vinyls, 1.9% of textiles, 3.2% of wood and 1.5% of rubber & leathers respectively. Most of MSW are composed of food, paper and plastic waste and the combustible waste is more than 90%. For three components, moisture is 44.6%, combustible component is 47.7% and ash is 7.7% respectively. The chemical elements are carbon, oxygen, and hydrogen on the dry basis of wastes. The low heating value of the MSW measured by calorimeter was obtained as 2,631 kcal/kg, and the high heating value of the MSW was obtained as 3,310 kcal/kg.

• Korean Journal of Plant Resources
• /
• v.22 no.4
• /
• pp.293-298
• /
• 2009

We prepared densified wood pellet by agricultural waste. The hemp woody core was used as replacing wood resource. Hemp was separated into the bast fiber and the woody core by hot steaming treatment. The hemp woody core had a similar lignin content(19.4%) and carbohydrate composition with hardwood(20-25% lignin in hardwood), respectively. Also, the hemp had a low ash content(0.5%), which resulted in a low ash formation in pellet burning. Heating value of the hemp pellet(18.40 MJ/kg) had a very similar to the pellet made by hardwoods. The hemp woody core could be replaced the hardwood for densified wood pellet.

• New & Renewable Energy
• /
• v.9 no.3
• /
• pp.29-35
• /
• 2013

This research analyzed the fuel characteristic change of spent coffee bean by torrefaction. The calorific value was increased from 4,974 kcal/kg to 6,075 kcal/kg ($260^{\circ}C$, 30min), 6,452 kcal/kg ($270^{\circ}C$, 30min), 6,823 kcal/kg ($280^{\circ}C$, 30min), 6,970 kcal/kg ($260^{\circ}C$, 30min). The highest energy yield was obtained when the spent coffee bean were torrefied on the condition of $280^{\circ}C$, 30min. The moisture absorption rate was decreased from 5.12% to 2.76% when the spent coffee bean were torrefied on the condition of $290^{\circ}C$, 30min. Lignin was increased from 11.33% to 14.39% on the condition of $260^{\circ}C$ 30min. But it did not preferability to torrefy spent coffee bean at temperature of more than $270^{\circ}C$ because lignin decreases to the level that is hard to make pellet.

• Clinical and Experimental Pediatrics
• /
• v.52 no.8
• /
• pp.898-903
• /
• 2009

Purpose : This study investigated the predictive factors for identifying infection-prone febrile infants younger than three months. Methods : We conducted a retrospective study of 167 infants younger than three months with an axillary temperature >$38^{\circ}C$ who were hospitalized between 2006 and 2008. If they met any of the following criteria, positive blood culture, CSF WBC ${\geq}11/mm^3$ or positive CSF culture, urinalysis WBC ${\geq}6$/HPF and positive urine culture, WBC ${\geq}6$/HPF on microscopic stool examination or positive stool culture, they were considered at high risk for severe infection. Infants with focal infection, respiratory infection or antibiotic administration prior to admission to the hospital were excluded. We evaluated the symptoms, physical examination findings, laboratory data, and the clinical course between the high risk and low risk groups for severe infection. Results : The high-risk group included 77(46.1%) infants, and the most common diagnosis was urinary tract infection (51.9%). Factors, such as male sex, ESR and CRP were statistically different between the two groups. But, a multilinear regression analysis for severe infection showed that male and ESR factors are significant. Conclusion : We did not find the distinguishing symptoms and laboratory findings for identifying severe infection-prone febrile infants younger than three months. However, the high-risk group was male and ESR-dominated, and these can possibly be used as predictive factors for severe infection.