• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.2
• /
• pp.140-149
• /
• 1985

Fully reversed push-pull low cycle fatigue tests under strain control of trapezoid cyclic mode have been conducted in air at temperature of 550.deg. C and with frequency of 0.5 cpm on the domestic stainless steel STS 316 after solution treatment for 1 hour at 1100.deg. C. As an experimental equipment for high temperature fatigue tests, an electric servo-hydraulic fatigue machine(Instron model 1350) was used. This paper presents the effects of creep hold time and plastic strain range on push-pull high temperature low cycle fatigue life and fracture behavior. The fracture surfaces were observed by means of the scanning electron microscope. The results are as follows. (1) The fatigue life decreases with increase of the plastic strain range equal hold time and also decreases as the hold time is getting longer. (2) The frequency modified damage function can predict fatigue life by incorporating a variation of Coffin's frequency modified approach into damage function. (3) The ratios of creep damage and fatigue damage can be calculated by using he linear accumulation damage concept and the ratio of creep damage increases as the hold time is getting longer. (4) At the creep hold time of 5 minutes and the strain range of 2.0%, the fracture mode was intergranular fracture and striations were hardly observed. In this case, the intergranular cracking was originated in void type('.gamma.' type) cracking.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.869-872
• /
• 2008

Recently, the effects of high temperature on compressive strength, elastic modulus and strain at peak stress of high strength concrete were experimentally investigated. The present study is aimed to study the effect of elevated temperatures ranging from 20 to $700^{\circ}C$ on the material mechanical properties of high-strength concrete of 40, 60, 80MPa grade. In this study, the types of test were the stressed test and stressed residual test that the specimens are subjected to a 25% of ultimate compressive strength at room temperature and sustained during heating and when target temperature is reached, the specimens are loaded to failure. Or specimens are loaded to failure after 24hour cooling time. tests were conducted at various temperatures ($20{\sim}700^{\circ}C$) for concretes made with W/B ratios 46%, 32% and 25%. Test results showed that the relative values of compressive strength and elastic modulus decreased with increasing compressive strength grade of specimen.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.5
• /
• pp.1-8
• /
• 2000

Fatigue and data retention characteristics of the Pt/PZT/Pt structure using single grain PZT thin films by PZT seeding method were investigated. In case of fatigue, there is no loss in switched polarization up to 2$\times$10$^{11}$ cycles using 1MHz square wave form at $\pm$10V and no data loss after 30000sec of memory retention at room temperature. From the activation energy measured at high temperatures, the time required 20% loss in remanent polarization is estimated to be 6.6$\times$10$^{7}$ years at room temperature.

• Asian Journal of Turfgrass Science
• /
• v.15 no.2
• /
• pp.51-64
• /
• 2001

Summer stress is one of the serious problems on cool-season grass at the soccer fields in Korea during heavy rainy season. This study was conducted to intestigate the effect of shade net with regard to its percent (0, 50, 75), color (black, green), height (0 cm, 30 cm) and time (7 hr, 24 hr) on turf canopy temperature, light intensity, leaf color, turf performance, clipping yield and root dry weight of cool-season turfgrass. Turf canopy temperature was 6~13$^{\circ}C$ under black and green shade net when temperature was over 4$0^{\circ}C$. Light intensity was also decreased from 40 to 94% under black and green shade net compared to control. Black shade net was more effective than green net in reduction of temperature and light intensity. Green shade net was found to be better for photosynthesis of cool-season grass. Leaf color, turf performance, clipping yield, and root dry weight were better and increased under 50% and 75% shade net. 50% black shade net with 30cm height and 7 hr treatment showed the best turf performance. It can be concluded that 50% and 75% green shade net can be used fur reducing summer stress on cool-season grass after soccer marches during heavy rain season. The shade net decreased the turf canopy temperature and reduced heating damage of cool-season turfgrass.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.4
• /
• pp.307-317
• /
• 2021

In recent years, global warming has led to frequent climate change-related problems, and elevated temperatures, among adverse climatic factors, represent a critical problem negatively affecting crop growth and yield. In this context, the present study examined the physiological traits of wheat plants grown under high temperatures. Specifically, the effects of elevated temperatures on seed development after heading were evaluated, and the vegetation indices of different organs were assessed using hyperspectral analysis. Among physiological traits, leaf greenness and OJIP parameters were higher in the high-temperature treatment than in the control treatment. Similarly, the leaf photosynthetic rate during seed development was higher in the high-temperature treatment than in the control treatment. Moreover, temperature by organ was higher in the high-temperature treatment than in the control treatment; consequently, the leaf transpiration rate and stomatal conductance were higher in the control treatment than in the high-temperature treatment. On all measuring dates, the weight of spikes and seeds corresponding to the sink organs was greater in the high-temperature treatment than in the control treatment. Additionally, the seed growth rate was higher in the high-temperature treatment than in the control treatment 14 days after heading, which may be attributed to the higher redistribution of photosynthates at the early stage of seed development in the former. In hyperspectral analysis, the vegetation indices related to leaf chlorophyll content and nitrogen state were higher in the high-temperature treatment than in the control treatment after heading. Our results suggest that elevated temperatures after the booting stage positively affect wheat growth and yield.

• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.188-194
• /
• 1999

We synthesized the nonlinear optical (NLO) PI-SOT(polyimide system, 4-[N,N-bis(hydroxyethyl)amino-4,-($\beta$-cyano-$\beta$-methylsulfonyl)vinyl]azobenzene) polymer with high electro-optic coefficients as well as good thermal and temporal stabilities of the elector-optic coefficient ${\gamma}_33$ by the simple Mitsunobu reaction. By using the simple reflection method of C. C. Teng, we measured the thermal and temporal stabilities of the electro-optic coefficient ${\gamma}_33$ of corona-poled PI-SOT polymer at the wavelength of 632.8 nm and 852 nm, respectively. At the temperature of $20^{\circ}C$, the electro-optic coefficient ${\gamma}_33$ of corona-poled PI-SOT polymer were 25.12 pm/V at the wavelength of 632.8 nm and 5.40 pm/V at the wavelength of 852 nm. These values were highly stabilized for more than 60 days at 2$0^{\circ}C$ and stabilized within 6% for more than 10 hours at $100^{\circ}C$.

• Food Science and Preservation
• /
• v.11 no.3
• /
• pp.304-312
• /
• 2004

Early harvested Satsuma mandarin (Citrus unshiu) was treated with hot air at 45$^{\circ}C$ for 2, 4, and 6 hours and stored at 5$^{\circ}C$ for 3 weeks and additional one week at 18$^{\circ}C$ (simulated shelf-life) in order to examine the effect of mild heat treatment on the storage quality of the citrus fruits. Quality attributes of the sample fruits evaluated during storage included the respiration rate, internal gas composition, pH, titratable acidity, soluble solids content, flesh weight loss, firmness, peel color, decay ratio, and sensory properties. The initial respiration rates, just after hot air treatment, were significantly higher in the heat-treated fruits compared to the untreated. However, during storage at 5$^{\circ}C$, the respiration rates showed a similar level in all treatments. Internal gas composition exhibited no significant difference between the heat-treated and untreated samples. Hot air treatment also exerted no significant effects on the pH, titratable acidity, soluble solid contents, flesh weight loss, firmness, and peel color of the fruits during the whole storage period. The decay ratio was manifestly lower in the heat-treated fruits than the untreated. For sensory attributes including visual and organoleptic quality, no significant difference was observed among sample fruits. Results suggested that mild heat treatment with hot air at 45$^{\circ}C$ for 4-6 hours could be used as an effective preconditioning method to keep the postharvest quality of Satsuma mandarin by reducing the decay incidence remarkably during storage.

• Korean Journal of Plant Resources
• /
• v.20 no.5
• /
• pp.398-403
• /
• 2007

This study was carried out to enhance germination of the seed by different immersion temperatures(15, 20, 25, 30 and $35^{\circ}C$) and times(1, 6, 12, 18, 24, 36 and 48 hours) in Cryptomeria japonica that is a major plantation species in the southern Korea. Optimum germination temperature was between $20^{\circ}C$ and $25^{\circ}C$, and the lowest germination was observed at $35^{\circ}C$ Moisture absorption increased with increasing immersion time as a whole and was high at $30^{\circ}C$ and $35^{\circ}C$. Initial moisture absorption rate was highest at $30^{\circ}C$ whereas was lowest at $15^{\circ}C$ Moisture absorption rate constant was also high at $30^{\circ}C$ and $35^{\circ}C$, however, it was relatively low at $15^{\circ}C$ and $20^{\circ}C$ Germination was the highest when the seeds were immersed for 48 hours at $30^{\circ}C$. In mean germination time(MGT) the seeds immersed for 48 hours at $30^{\circ}C$ did not differ from non-treatment, while the others showed higher values than non-treatment. Consequently, germination could be enhanced and MGT was kept by optimum immersion temperature and time.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.417-420
• /
• 2009

The purpose of the present study is to evaluate high temperature fracture toughness through the experimental and analytical method. The analysis method is proposed to simulate the fracture toughness of high temperatures. Load-COD curves of compact test specimen acquired by finite element method analysis using hypo elastic model are simulated to determine the crack initiation load on high temperatures. The results of experimental work are in accord with analysis in thermal shock test.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.55.2-55.2
• /
• 2010

기존의 thermal spray coating은 분사시 가스와 입자가 높은 열을 동반하여 상대적으로 차가운 기판과의 충돌되는 과정에서 기판과 입자 사이에 열응력이 발생하게 되고, 이것은 코팅 특성을 저하시킨다. 또한 고온의 가연성 가스등의 사용으로 작업 시 안전문제 등의 단점이 있었다. 이러한 단점을 보완하기 위하여 분사 시 운동에너지를 주로 이용하는 cold spray coating 공정이 개발되었다. 이 공정은 코팅 입자를 임계속도 이상으로 가속시켜 입자와 기판이 충돌시 소성 변형을 통해 적층되는 코팅기술이다. Cold spray coating공정은 상온 코팅이 가능하기 때문에 주입입자의 물성이 비교적 그대로 유지되고, 고온의 열로 인한 기판의 변질을 막을 수 있다. Cold Spray coating에서 주로 원형 노즐을 사용하나 본 연구에서는 분사 효율 향상을 위한 광폭노즐을 사용하여 코팅 시간 단축을 기대하고 있다. 임계속도 이상의 입자 확보를 위하여 노즐의 expansion ratio와 노즐 shape의 변화를 주어 그에 따른 노즐내의 유동장을 수치해석을 통해 계산하였다. 분사되는 출구면과 기판 사이의 입자 속도 분포를 해석하였고, 이를 통해 임계속도 이상의 속도를 갖는 유효 입자들의 분포 및 유효 분사 면적을 예측하였다. 또한, 기존의 원형 노즐과 광폭 노즐과의 유동장 비교 및 각 노즐 분사면을 분석하여 cold spray coating공정에서의 효율적인 노즐 형상을 디자인하였다.