• Journal of agriculture & life science
• /
• v.46 no.3
• /
• pp.119-127
• /
• 2012

For the promotion of the evaporative cooling efficiency of hot air in greenhouse in summer, a fog sprayer consisted of a high volume spraying two-fluid nozzle with turbo fan and a blowing fan was set up at 2.2 m height from bottom of small glass greenhouse and tested to estimate the possibility of the greenhouse cooling. The mean droplet size and the volume sprayed by one of fog sprayer were $29{\mu}m$ and $160m{\ell}/min$. All the droplets sprayed and blown by the fog sprayer were evaporated within 2 m radius. The result from the cooling test that two sprayers set up in glass greenhouse of plane area $228m^2$ was represented lower cooling effect that the temperature and relative humidity of inside air of greenhouse were $28.8^{\circ}C$ and 87.5% when those of outside air of greenhouse were $30.2^{\circ}C$ and 81.2%. Through investigation of literatures and results of the cooling test, it was estimated that the water spraying rate of evaporative cooling of single span greenhouse with 50% light curtain and with air change rate of 1 volume/min was $10m{\ell}/min/m^2$ so that the inside air temperature may cool down $2{\sim}3^{\circ}C$ on the basis of $35^{\circ}C$ atmospheric temperature in summer of south korean area.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.2
• /
• pp.105-113
• /
• 2019

A two-year study was conducted from 2017 to 2018 by the establishment of a test field at Chungju-si and Cheongyang-gun. Plant height, number of leaves, insects and diseases, and fresh and dry matter yields for corn hybrid('Kwangpyeongok') were investigated. Daily average, maximum, and minimum temperature, monthly average temperature, daily precipitation, and sunshine duration during the growing season were investigated. We selected climate-critical factors to corn productivity and conducted an evaluation of vulnerability to climate change from 1999 to 2018 for both regions. In 2018, the dry matter yield of forage corn was 6,475 and 7,511 kg/ha in Chungju and Cheongyang, respectively, which was half of that in 2017. The high temperature and drought phenomenon in the 2018 summer caused the corn yield to be low. As well as temperature, precipitation is an important climatic factor in corn production. As a result of climate impact vulnerability assessment, the vulnerability has increased recently compared to the past. It is anticipated that if the high temperature phenomenon and drought caused by climate change continues, a damage in corn production will occur.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.13 no.1
• /
• pp.2191-2205
• /
• 1971

In this research, Nong-rim No. 6 was adopted as a test variety of rice. Rice seedlings were transplanted on June 14, 1970. Roots were settled into soil on June 20 and a total number of days irrigated of $21cm{\times}21cm$ and an area of $9.9m^2$ for a test plot were accepted, planting 70 stumps of rice in a test plot. The soil in test plots are classified by soil test as oam, and its chemical contents are as shown in Table 3. Irrigation water was secured by pumping from the Sudun stream that originates at the Suho reservoir. Accordingly, the qualities of irrigation. water are considered to be the same as those of water stored in the Suho reservoir. There were 54 days of intermittent rainfalls in total during the whole 110-day period of irrigation. As a result, it is likely that the growth of rice plants was influenced by rainfall at a comparatively great degree. In order to measure the amounts of water consumption, infiltrometers, measuring devices for the decreases of water depths and lycimeters were provided. As a result of measurements, an average daily rate of infiltration was observed to be 14mm/day. It is expected from this research that the effect of increased yield will be secured by supplying optimum amounts of water for irrigation on proper times, and that the amounts of water consumption for irrigation can be saved by applying suitable irrigation methods. The test results obtained are summarized as follows: 1. Yields produced in the test plots of continuous irrigation are lower than those in the test plots of rotational irrigation, i.e., yields produced at the test plots irrigatied once in a period of 8 days are higher by 27% in average than those produced at test plots of continuous irrigation. 2. The amounts of irrigation water for test plots, which have a clay layer of 9cm in thickness and vynil diaphragm without holes, are saved by about 52% in comparison with ordinary test plots. 3. Ears are sprouted 5 days earlier at continuous irrigation plots as compared with other test plots. 4. It seems that there are growing stages of rice plants such as those of forming and sprouting of ears, in which the amounts of irrigation water are consumed more in comparison with the other stages. Therefore, it may be possible to increase of decrease the amount of irrigation water, according to the growing stage of rice plant, so as to save irrigation water.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.5
• /
• pp.407-428
• /
• 1991

The eastern coastal area having variability of climate is located within Taebaek mountain range and the east coast of Korea. It is therefore ease to cause the wind damages in paddy field during rice growing season. The wind damages to rice plant in this area were mainly caused by the Fohn wind (dry and hot wind) blowing over the Taebaek mountain range and the cold humid wind from the coast. The dry wind cause such as the white head, broken leaves, cut-leaves, dried leaves, shattering of grain, glume discolouration and lodging, On the other hand the cold humid wind derived from Ootsuku air mass in summer cause such symptom as the poor rice growth, degeneration of rachis brenches and poor ripening. To minimize the wind damages and utilize as a preparatory data for wind injury of rice in future, several experiments such as the selection of wind resistant variety to wind damage, determination of optimum transplanting date, improvement of fertilizer application methods, improvement of soils and effect of wind break net were carried out for 8 years from 1982 to 1989 in the eastern coastal area. The results obtained are summarized as follows. 1. According to available statisical data from Korean meteorological services (1954-1989) it is apperent that cold humid winds frequently cause damage to rice fields from August 10th to September 10th, it is therefore advisable to plan rice cultivation in such a way that the heading date should not be later than August 10th. 2. During the rice production season, two winds cause severe damage to the rice fields in eastern coastal area of Korea. One is the Fohn winds blowing over the Taebaek mountain range and the other is the cold humid wind form the coast. The frequency of occurrence of each wind was 25%. 3. To avoid damage caused by typhoon winds three different varieties of rice were planted at various areas. 4. In the eastern coastal area of Korea, the optimum ripening temperature for rice was about 22.2$^{\circ}C$ and the optimum heading date wad August 10th. The optimum transplanting time for the earily maturity variety was June 10th., medium maturity variety was May 20th and that of late maturity was May 10th by means of growing days degree (GDD) from transplanting date to heading date. 5.38% of this coastal area is sandy loamy soil while 28% is high humus soil. These soil types are very poor for rice cultivation. In this coastal area, the water table is high, the drainage is poor and the water temperature is low. The low water temperature makes it difficult for urea to dissolve, as a result rice growth was delayed, and the rice plant became sterile. But over application of urea resulted in blast disease in rice plants. It is therefore advise that Ammonium sulphate is used in this area instead of urea. 6. The low temperature of the soil inhibits activities of microorganism for phosphorus utilization so the rice plant could not easily absorb the phosphorus in the soil. Therefore phosphorus should be applied in splits from transplanting to panicle initiation rather than based application. 7. Wind damage was severe in the sandy loamy soil as compared to clay soils. With the application of silicate. compost and soil from mointain area. the sand loamy soil was improved for rice grain colour and ripening. 8. The use of wind break nets created a mocro-climate such as increased air. soil and water temperature as well as the reduction of wind velocity by 30%. This hastened rice growth, reduced white head and glume discolouration. improved rice quality and increased yield. 9. Two meter high wind break net was used around the rice experimental fields and the top of it. The material was polyethylene sheets. The optimum spacing was 0.5Cm x 0.5Cm. and that of setting up the wind break net was before panicle initiation. With this set up, the field was avoided off th cold humid wind and the Fohn. The yield in the treatment was 20% higher than the control. 10. After typhoon, paddy field was irrigated deeply and water was sprayed to reduce white head, glume discolouration, so rice yield was increased because of increasing ripening ratio and 1, 000 grain weight.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2A
• /
• pp.129-136
• /
• 2011

Recently studies on functional concrete with a photocatalytic material such as $TiO_2$ have actively been carried out in order to remove air pollutants. The absorbtion of $TiO_2$ from those studies is applied by it being directly mixed into concrete or by suspension coated on the surface. When it comes to the effectiveness, the former process is less than that of the latter compared with the $TiO_2$ use. As a result, the direct coating of $TiO_2$ on materials' surface is more used for effectiveness. The Surface spread of it needs to have a more than $400^{\circ}C$ heat treat done to stimulate the activation and adhesion of photocatalysis. Heat treat consequently leads hydration products in concrete to be dehydrated and shrunk and is the cause of cracking. The study produces $TiO_2$ used Sol-gel method which enables it to be coated with a low temperature treat, applies it to pearlite using Lightweight Aggregate Concrete fixed with a low temperature treat and evaluates the spread performance of it. In addition to this, the size of pearlite is divided into two types: One is 2.5 mm to 5.0 mm and the other is more than 5.0 mm for the benefit of finding out the removal characteristics of $CH_3CHO$ whether they are affected by pearlite size, mixing method and ratio with $TiO_2$ and elapsed time. The result of this experiment shows that although $TiO_2$ produced by Sol-gel method is treated with 120 temperature, it maintains a high spread rate on the XRF(X ray Florescence) quantitative analysis which ranks $TiO_2$ 38 percent, $SiO_2$ 29 percent and CaO 18 percent. In the size of perlite from 2.5 mm to 5.0 mm, the removal characteristic of $CH_3CHO$ from a low temperature heated Lightweight concrete appears 20 percent higher when $TiO_2$ with Sol-gel method is spreaded on the 7 percent of surface. In other words, the removal rate is 94 percent compared with the 72 percent where $TiO_2$ is mixed in 10 percent surface. In more than 5.0 mm sized perlite, the removal rate of $CH_3CHO$, when $TiO_2$ is mixed with 10 percent, is 69 percent, which is similar with that of the previous case. It suggests that the size of pearlite has little effects on the removal rate of $CH_3CHO$. In terms of Elapsed time, the removal characteristic seems apparent at the early stage, where the average removal rate for the first 10 hours takes up 84 percent compared with that of 20 hours.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.1
• /
• pp.93-103
• /
• 1992

Experiments were conducted in the research field of the Wheat and Barley Research Institute with three barley cultivars, Olbori, Kangbori and Suwon 18, which showed different growth characteristics. The highest rates of daily dry matter accumulation in grains were 1.03 1.94 mg / grain / day in early and optimum sowings and 0.88 1.88 mg / grain / day in late sowings, which occurred around 20～30 days after heading in early and optimum sowings and 15～20 days after heading in late sowings. Grains reached their maximum weight by 40 days after heading in early and optimum sowings and 35 days after heading in late sowings. Total sugar content in grains followed a pattern of linear increase immediately after heading, but it started to decrease around 20 days after heading. On the other hand, starch content continued to increase until maturity. The contents of both components were high in the order of ＆apos;Olbori＆apos; ＆gt; ＆apos;Kangbori＆apos; ＆gt; ＆apos;Suwon 18＆apos;, but they did not respond in a regular pattern to different sowings. 1,000 grain weight showed highly significant positive correlation(r=0.767$^{**}$) with the duration of grain growth, but it had negative correlations with the average (r=-0.548$^{**}$) or the sum (r=-0.595$^{**}$) of post-anthesis daily mean temperature.ature.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.4 no.3
• /
• pp.194-200
• /
• 1984

Effects of seed coating on establishment, early growth and herbage production were investigated in Pot, Soil box and Field experiments. Seed was coated with 60% Lime, 20% Phosphate and 20% Peatmoss(W/W), also finely sprayed 13% Arabic gum and 2% Methyl cellulose(W/V). Coating were generally 1:20, seed: coat(W/W). 1. In the general growth of the growing stages and different oversown species at 80 days, seed coated was promoted than none in early growth. (Table 2 and 3) 2. Stand counts at 60 days after oversown, seed coated was higher 15% than none, especially, there was advantage due to coating on the medium and large size seeds such as Orchardgrass, Perennial ryegrass and Kentucky bluegrass, but did not assist establishment of the large (Tall fescue) and small (Ladino clover) size seed. 3. Variation of sward composition was not quite different between two treatments, but seed coated was slightly increased the Percentage of sown grasses with advance of cutting time. 4. Total dry metter yield per unit area with seed coated was higher 17% than none in establishment year. 5. Variations in the chemical composition of the herbage and soil were influenced by coating materials in the coating regime (Table 8). 6. From these facts, seed coated also appeared that adequate seedling stands, early growth and herbage production could be obtained with higher than conventional overseeding method under a poor conditions.

• Korean Journal of Medicinal Crop Science
• /
• v.1 no.1
• /
• pp.3-9
• /
• 1993

This experiment was conducted to study germination characteristics and the decrease cause of germination percent in Angelica gigas Nakai seed. The emergence percent of winter sowing was higher than that of spring sowing as 66.6% and 41.1%, respectively, and the first emergence date was also earlier in winter sowing. The seed germination speed, percent and coefficent showed the highest value at $20^{\circ}C$ of incubation temperature, but lower value at $10^{\circ}C\;and\;30^{\circ}C$. The water uptake speed was increased along with increasing water temperature. The weight of imbibed seed at germination was 3.4times higher based on the weight of intact dry seed and 2.3times on removal of seed coat. In terms of length of seed was large, the germination percent was higher. The germination percent of brown colored seeds showed higher value than that of green colored seeds. The prolonged storage period decreased germination percent. When A.gigas seeds stored at room temperatue for 2years, the seeds were lost their viability. The biological inhibition effect of methanol, water and ether extract on the germination and growth of A.gigas and lettuce seed showed the highest value in the methanol extract, followed by water extract and the least in ether extract.

• Korean Journal of Poultry Science
• /
• v.8 no.1
• /
• pp.7-14
• /
• 1981

The experiment using Anake broiler strain chicks was conducted to study the effort fungistatic agents on microbial counts, Ins of nutrient, growth rate and feed efficiency of the broiler. Feed was adjusted to 12% and 15% moisture level during hot and high humidity season and sorbic acid at the level of 0.02%, 0.04% and Ca-propionic acid at the level 0.1% 0.2% was added. The results obtained were as follows. 1, The Addition of fungistatic agents could slightly reduce mold and yeast counts. The highest effect on inhibition of mold and yeast counts was observed for the addition of sorbic acid at 0.04% level to the fled contained 15% moisture. 2, Approximately 14% starch loss of ground corn was observed from the fred contained 15% moisture and the loss could be diminished to 3-7% by the addition of fungistatic agents with the superior effect of sorbic acid to Ca-propionic acid. 3. Approximately 15% fat loss was detected when high moisture fled was und and this was reduced to 7% by the addition of 0.04% sorbic acid to the feed. 4. Significantly higher growth rate (p＜0.05) during starter period was observed for low moisture feed added by sorbic acid compared with that for high moisture diet without fungistatic agents or with Ca-propionate at the level of 0.1%. 5. Significantly lower feed efficiency (p＜0.05) during starter period of high moisture feed without fungistatic agents was observed; hower no significant different response was detected by either moisturer level of kinds and levels of fungistatic agents used. 6. Significantly higher growth rate (p＜0.05) during finisher period of lower moisture feed with 0.04% sorbic acid was observed compared with that of high moisture fled without fungistatic agents or the feed added by 0.1% Ca-propionate level. 7. Significantly higher feed efficiency (p＜0.05) during finisher period of low moisture feed added by sorbic acid 0.02% or 0.04% level was found compared with that of high moisture feed without fungistatic agents and low moisture feed added by Ca-propionate at the level of 0.1% or 0.2%. 8. Mort bacteria, mold and yeast were observed in the ceca than in small intestine. The. moisture content of dict had no effect on intestinal microfloral counts. However, numbers of mold and yeast of intestine could slightly be reduced by fungistatic agents administration. 9. Nothing but encephalomalacia to chicks fed feed contained 15% moisture without addition of fungistatic agents was observed. In conclusion, addition of either sorbid acid at 0.04% level and Ca-propionate at 0.2% level to high moisture feed or reduced moisture level to 12% could be con-sidered more effective to enhance growth rate and fled efficiency of broilers during summer period.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.1
• /
• pp.23-30
• /
• 2007

The ultimate objective of this study is to develop oxygen-enriched combustion techniques applicable to the system of practical industrial boiler. To this end the combustion characteristics of lab-scale LNG combustor were investigated as a first step using the method of numerical simulation by analyzing the flame characteristics and pollutant emission behaviour as a function of oxygen enrichment level. Several useful conclusions could be drawn based on this study. First of all, the increase of oxygen enrichment level instead of air caused long and thin flame called laminar flame feature. This was in good agreement with experimental results appeared in open literature and explained by the effect of the decrease of turbulent mixing due to the decrease of absolute amount of oxidizer flow rate by the absence of the nitrogen species. Further, as expected, oxygen enrichment increased the flame temperatures to a significant level together with concentrations of $CO_2$ and $H_2O$ species because of the elimination of the heat sink and dilution effects by the presence of $N_2$ inert gas. However, the increased flame temperature with $O_2$ enriched air showed the high possibility of the generation of thermal $NO_x$ if nitrogen species were present. In order to remedy the problem caused by the oxygen-enriched combustion, the appropriate amount of recirculation $CO_2$ gas was desirable to enhance the turbulent mixing and thereby flame stability and further optimum determination of operational conditions were necessary. For example, the adjustment of burner with swirl angle of $30\sim45^{\circ}$ increased the combustion efficiency of LNG fuel and simultaneously dropped the $NO_x$ formation.