• Bulletin of Korea Environmental Preservation Association
• /
• v.25 no.3_4
• /
• pp.47-47
• /
• 2003

• Nuclear industry
• /
• no.5_6 s.7
• /
• pp.3-13
• /
• 1982

• 열병합발전
• /
• s.36
• /
• pp.4-9
• /
• 2003

• Environmental engineer
• /
• no.6 s.262
• /
• pp.56-59
• /
• 2008

• Nuclear industry
• /
• no.7_8 s.8
• /
• pp.45-51
• /
• 1982

• Journal of Aerospace System Engineering
• /
• v.11 no.2
• /
• pp.43-50
• /
• 2017

The sea of the Korean peninsula has undergone various marine changes, including naval vessels, naval operational aircrafts, air force fighters, coastal airports and airfields. In particular, salt directly affected by the marine environment, equipment operating under a high temperature / high speed as the gas turbine is the high temperature corrosion (Hot Corrosion) caused by sulfur components and salinity of the fuel used. When the height of the demister (air intake) is less than 7 m, the salinity of the salt entering the sea increases and the corrosion increases rapidly. In addition, the weapon systems operating in the East Sea than in the West Sea showed a 17% increase in the corrosion rate due to the relatively high salinity scattered by saline, wind, and wave. In order to minimize the salinity inflow, it should be operated at more than 13 m from the sea to minimize rapid hot corrosion.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.137-138
• /
• 2017

The sea of the Korean peninsula has various marine changes, including naval vessels, naval operational aircrafts, air force fighters, coastal airports and airfields. In particular salt directly affected by the marine environment, equipment operating in a high temperature / high speed as the gas turbine is the high temperature corrosion(Hot Corrosion) caused by sulfur components and salinity of the fuel used. When the height of the demister (air intake) is less than 7m, the salinity entering the sea increases and the corrosion increases rapidly. In addition, the weapon systems operating in the East Sea than the West Sea showed a 17% increase in corrosion rate due to the relatively high salinity scattered by saline, wind, and wave. In order to minimize the salinity inflow, it should be operated at more than 13m from the sea to minimize rapid hot corrosion.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.71.1-71.1
• /
• 2013

메탄가스와 이산화탄소는 지구온난화 가스이기 때문에 배출규제가 점차 강화될 것으로 전망되고 있다. 또한 이들 가스는 매립지 또는 바이오 공정을 통해 발생되는 가스이기 때문에 단순히 배출을 억제하는 데 그치지 않고 보다 적극적으로 활용해야할 필요성이 있다. 현재 메탄과 이산화탄소를 동시에 활용하는 기술로는 촉매공정을 통해 메탄과 이산화탄소를 수소와 일산화탄소로 전환하는 방법이 대표적이나, 본 공정은 $800{\sim}900^{\circ}C$의 고온조건을 필요로 하고 고압조건에서 다량으로 생성되는 탄소에 의한 촉매 활성도의 저하문제로 인해 해당 기술의 실제 보급에 어려움이 있는 것으로 알려져 있다. 한편, 플라즈마를 활용한 메탄가스 개질(reforming) 기술은 고온 플라즈마인 경우 60~70년 전부터 상용화 사례가 있으며, 저온 플라즈마의 경우는 약 10여 년 전부터 개질반응의 공정온도를 낮추려는 연구를 중심으로 기초연구가 수행되어왔다. 이들 플라즈마를 활용한 메탄개질 기술은 메탄의 직접분해, 부분산화, 수증기 개질 및 건식개질 등으로 분류되는 데, 최근 지구온난화가스인 이산화탄소의 처리에 대한 관심이 높아지면서 이산화탄소를 활용하는 건식개질 기술에 대한 관심이 높아지고 있는 상황이다. 현재 플라즈마 건식개질기술에서 주된 이슈는 높은 전력비용이고, 이를 낮추기 위해 촉매를 활용하거나 플라즈마 발생을 최적화하려는 연구가 진행되고 있다. 본 발표에서는 플라즈마를 활용한 건식개질 기술의 장단점, 실용화 가능성 및 향후의 과제를 다루고 있으며, 이를 위해 기계연구원에서의 연구결과 및 국내외 연구실의 결과를 살펴보았다.

• Journal of the Korean Ceramic Society
• /
• v.40 no.9
• /
• pp.891-896
• /
• 2003

Novel fabrication technique was developed for high strength Reaction-Bonded SiC (RBSC) hot gas filter for use in IGCC (Integrated Gasification Combined Cycle) system. The room and high temperature fracture strengths for Si-melt infiltrated reaction-bonded SiC were 50-123, and 60-66 MPa, respectively. The average pore size was 60-70 $\mu\textrm{m}$ and the porosity was about 34 vol％. RBSC infiltrated with molten silicon showed improved fracture strength at high temperature, as compared to that of clay-bonded SiC, due to SiC/Si phase present within SiC phase. The thickness for SiC/Si phase was increased with increasing powder particle size of SiC from 10 to 34 $\mu\textrm{m}$. Pressure drop with dust particles showed similar response as compared to that for Schumacher type 20 filter. The filter fabricated in the present study showed good performance in that the filtered powder size was reduced drastically to below 1 $\mu\textrm{m}$ within 4 min.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.5
• /
• pp.469-474
• /
• 2014

The high temperature gas-cooled reactor (HTR-10) is designed to produce electricity and hydrogen. Graphite is used as reflector, support structures, and a moderator in reactor core; it has good resistance to neutron and is a suitable material at high temperatures. Friction is generated in the graphite structures for the core reflector, support structures, and moderator because of vibration from the HTR-10 fuel cycle flow. In this study, the wear characteristics of the isotropic graphite IG-110 used in HTR-10 were evaluated. The reciprocating wear test was carried out for graphite against graphite. The effects of changes in the contact load and sliding speeds at room temperature and $400^{\circ}C$ on the coefficient of friction and specific wear rate were evaluated. The wear behavior of graphite IG-110 was evaluated based on the wear surfaces.