• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1331-1332
• /
• 2010

• The Science & Technology
• /
• v.29 no.6 s.325
• /
• pp.18-19
• /
• 1996

각종 기능을 갖춘 센서와 컴퓨터로 자동항법장치를 한 미래의 자동차가 눈 앞에 다가오고 있다. 단단하고 충격을 줄여주는 특수 플라스틱, 밤에 운전시야를 넓혀주는 적외선 감지장치, 자동으로 펑크를 때워주는 로열티 타이어, 고온에 견디는 세라믹 엔진, 수소를 연료로 하는 공해없는 자동차 등의 개발이 한창 진행중이다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.527-532
• /
• 1996

Fe-Cr-Mn계 스테인리스강을 진공 용해하여 최적 소둔 조건인 1,20$0^{\circ}C$에서 30분동안 소둔 열처리한 후 미세 조직, 기계적 특성 및 부식 특성에 미치는 시효 열처리의 영향에 대하여 실험하였다. 미세 조직 분석은 광학 현미경 관찰, XRD분석, SEM분석, TEM분석 등으로 행하였고, 기계적 시험은 인장 시험, 충격 시험, 경도 시험을 행하였다. 부식 저항성을 평가하기 위해 황산, 염산분위기에서 양극 분극 시험을 행하였다. 시효 열처리에 따른 미세 조직간의 상분율 변화는 거의 없었지만 입계를 중심으로 제2상이 석출되었고, 그 양은 시효 시간이 증가함에 따라 증가하였다. 인장 강도 및 연신율은 낮은 시효 온도에서는 시효 온도와 시효 시간에 따라 큰 차이를 보이지 않았지만 고온으로 갈수록 시효 시간이 증가함에 따라 다소 감소하는 경향이 나타났다. 충격에너지는 1시간 시효시에는 시효 온도에 따라 큰 변화를 보이지 않았지만 10시간, 100시간 시효한 경우 시효 온도가 상승함에 따라 감소하였다. 이러한 경향은 고온에서 시효한 경우 입계성장이 가속화되어 나타난 것으로 판단된다. 시효 시간이 증가함에 따라 부식 환경에 관계없이 부식 저항성이 감소하였다. 85$0^{\circ}C$에서 시효한 경우 가장 우수한 내식성을 보였고, $650^{\circ}C$에서 낮은 내식성을 나타냈는데 이는 이 온도 구간에서 탄화물 등의 제2상의 석출에 의한 것으로 판단된다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.5
• /
• pp.450-457
• /
• 2009

Periodical thermal shock can introduce defects in thermal barrier coating made by layers of CoNiCrAlY bond coating(BC) and $ZrO_2-8wt%Y_2O_3$ ceramic top coating(TC) on Inconel-738 substrate using plasma spraying. Thermal shock test is performed by severe condition that is to heat until $1000^{\circ}C$ and cool until $20^{\circ}C$. As the number of cycle is increased, the fatigue by thermal shock is also increased. After test, the micro-structures and mechanical characteristics of thermal barrier coating were investigated by SEM, XRD. The TGO layer of $Al_2O_3$ is formed between BC and TC by periodical thermal shock test, and its change in thickness is inspected by eddy current test(ECT). By ECT test, it is shown that TGO and micro-crack can be detected and it is possible to predict the life of thermal barrier coating.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.10
• /
• pp.813-820
• /
• 2021

In this study, a low-velocity impact test was performed to obtain the dynamic properties of solid propellants. The dynamic behavior of the solid propellant was examined by measuring the force and displacement of the impactor during the low-velocity impact test. The bending displacement was calculated by compensating for the local displacement caused by the low-velocity impact test in the form of three point bending and the shear displacement caused by using a short and thick solid propellant specimen. Stress and strain were calculated using compensated displacements and measured force, and dynamic properties of solid propellants were obtained from the stress-strain curve and compared with static bending test. The dynamic properties of solid propellant under the low-velocity impact loading at various operating temperature conditions such as room temperature(20 ℃), high temperature(63 ℃), and low temperature(-32 ℃) were compared and investigated.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.4
• /
• pp.21-28
• /
• 1986

Conversion of anaerobic mesophilic digestion to thermophilic range has been investigated using a synthetic sludge. When temperature was raised at a rate of 2, 1, and $0.5^{\circ}C$ per day with continuous feeding, a lower reaction rate was observed with a high rate of temperature change. Although methane fermentation ceased completely for an digesters at thermophilic temperature, acid fermentation continued. Methane fermentation was never achieved even with neutralization during 6 months of resting. The methane formers were completely inactivated by the temperature shock and accumulation of volatile acids due to continuous feeding, while the acid formers lost biological activity quickly, but gradually acclimated to a high temperature. When temperature was raised without feeding, successful thermophilic digestion was achieved with 1 day of resting at thermophilic temperature at a rate of $1^{\circ}C$ per day, and also achieved with 20 days of resting at a direct increase. Conversion to a thermophilic range is easily achieved with resting. A short period of resting is required at a low rate of temperature increase, while a long period of resting enough to balance methane formers with acid fermers makes a conversion possile when temperature is raised at a high rate. Soured thermophilic digesters were recovered after seeding of mesophilic sludges, and sludge seeding could be a good method of start-up, conversion, or recovery of a thermophilic digester. Significant amount of thermophiles seemed to be present in the mesophilic digesters.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.248-248
• /
• 2004

초경합금재 (cemented carbides)는 WC(텅스텐 카바이드, 탄화텅스텐)과 Co(코발트)를 주성분으로 한 복합재료로서 저온경도와 고온경도가 뛰어 나며, 압축강도와 강성이 높은 것 등, 제반 물리적 성질이 안정되어 있다 이와 같은 우수한 특징을 이용하여, 초경합금재는 다양한 분야에 이용되고 있는데, 크게 나누어 절삭 공구용으로 뿐만 아니라 IT 관련, 환경 관련 산업용, 광산용 공구, 건설 공구, 철강의 압연 롤러 등의 내마멸, 내충격용 재료에도 많이 사용된다. 이들 가운데, 내마멸, 내충격용으로 사용되는 것은 절삭 공구용 초경합금재에 비해 결합제인 코발트를 많이 함유하며 경질 성분의 텅스텐 카바이드의 입자 지름도 거칠고 크다.(중략)

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.12
• /
• pp.3748-3758
• /
• 1996

This study is to investigate experimentally relationships between the impact energy and moisture absorption characteristies vs.the residual bending strength with the variation of stacking seqences. When Carbon-fiber reinforced plastics(CFRP) impact-induced laminates are subjected to the high temperatures and hygrothermal effects, it is found that what CFRP laminates are impacted by a steel ball (5 mm in diametar) ; thus, the generated delamination is observed by the ultrasonic microscope. And the residual bending strength is evaluated by a three-point bending test. Also, a thermostat is used in test with the unimpacted and impacted specimens for the moisture experimentaiton. The percision electro lever scles is used to measure the moisture content(1/10, 000g).

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.10
• /
• pp.1869-1876
• /
• 1992

The effect of particle property on FOD(foreign object damage) and strength degradation in structural ceramics especially, silicon carbide was investigated by accelerating a spherical particle having different material and different size. The damage induced showed significant differences in their patterns with increase of impact velocity. Also percussion cone was formed at the back part of specimen when particle size became large and its impact velocity exceeded a critical value. The extent of ring cracks was linearly related to particle size, however the impact of steel particle produced larger ring cracks than that of SiC particle. Increasing impact velocity the residual strength showed different degradation behaviors according to particle and its size. In the region the impact site represents nearly elastic deformation behavior, the residual strength was dependent upon the depth of cone crack regardless of particle size. However in elastic- plastic deformation region, the radial cracks led to rapid drop in residual strength.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.6
• /
• pp.571-579
• /
• 2009

For the flow analysis of reactive compressible media involving energetic materials and metallic confinements, a Hydro-SCCM (Shock Compression of Condensed Matter) tool is developed for handling multi-physics shock analysis of energetics and inerts. The highly energetic flows give rise to the strong non-linear shock waves and the high strain rate deformation of compressible boundaries at high pressure and temperature. For handling the large gradients associated with these complex flows in the condensed phase as well as in the reactive gaseous phase, a new Eulerian multi-fluid method is formulated. Mathematical formulation of explosive dynamics involving condensed matter is explained with an emphasis on validating and application of hydro-SCCM to a series of problems of high speed multimaterial dynamics in nature.