• Title/Summary/Keyword: 고압축비

Search Result 505, Processing Time 0.024 seconds

Utilization technique of methanol for automobile fuel (자동차 연료로서의 메탄올 이용기술)

  • 김문헌
    • Journal of the korean Society of Automotive Engineers
    • /
    • v.18 no.2
    • /
    • pp.18-28
    • /
    • 1996
  • 메탄올이 자동차 연료로서 유망시 되고 있는 이유는 공급면과 이용면의 두 측면에서 장점을 가지고 있기 때문일 것이다. 공급면에 있어서는 원료가 천연가스나 석탄등 자원이 풍부하다는 점이 다른 연료에 비해 유리하며 특히 천연가스로 부터의 화학용 메탄올 제조기술이 거의 확립되어 있다는 점이다. 이용면에 있어서는 상온에서 운송, 저장 및 유량 제어 측면에서 취급이 비교적 용이하며 메탄올 연료의 특성상 옥탄가가 높고 희박연소한계가 넓어 고압축비 희박연소기관을 실현할 수 있으며, NOx나 매연 발생이 적은 저공해 연료인 점이 장점이다. 본 고에서는 본인의 실험실에서 이루어진 메탄올 연료에 대한 몇가지 실험결과들을 토대로 하여 메탄올 기관에 있어서의 일반적인 특성 및 문제점들에 대하여 소개하고자 한다.

  • PDF

Maximum Shear Reinforcement of RC Beams using High Strength Concrete (고강도 콘크리트를 사용한 RC보의 최대철근비)

  • Lee, Jung-Yoon;Hwang, Hyun-Bok
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2008.11a
    • /
    • pp.839-842
    • /
    • 2008
  • The ACI 318-05 code requires the maximum amount of shear reinforcement in reinforced concrete (RC) beams to prevent possible sudden shear failure due to over reinforcement. The design equations of the maximum amount of shear reinforcement provided by the current four design codes, ACI 318-05, CSA-04, EC2-02, and JCI-99, differ substantially from one another. The ACI 318-05, CSA-04, and EC2-02 codes provide an expression for the maximum amount of shear reinforcement ratio as a function of the concrete compressive strength, but Japanese code does not take into account the influence of the concrete compressive strength. For high strength concrete, the maximum amount of shear reinforcement calculated by the EC2-02 and CSA-04 is much greater than that calculated by the ACI 318-05. This paper presents the effects of shear reinforcement ratio and compressive strength of concrete on the maximum shear reinforcement in reinforced concrete beams. Ten RC beams having various shear reinforcement ratio were tested. Although the test beams were designed to have much more amount of shear reinforcement than that required in the ACI 318-05 code, all beams failed due to web concrete crushing after the stirrups reached the yield strain.

  • PDF

Evaluation of Mechanical Properties for the Compacted Bentonite Buffer Materials (압축 벤토나이트 완충재의 역학 물성 평가)

  • Yoon, Seok;Hong, Chang-Ho;Kim, Taehyun;Kim, Jin-Seop
    • Journal of the Korean Geotechnical Society
    • /
    • v.37 no.10
    • /
    • pp.5-11
    • /
    • 2021
  • The compacted bentonite buffer is one of the most important components in an engineered barrier system (EBS) to dispose of high-level radioactive waste (HLW) produced by nuclear power generation. The compacted bentonite buffer has a crucial role in protecting the disposal canister against the external impact and penetration of groundwater, so it has to satisfy the thermal-hydraulic-mechanical requirements. Even though there have been various researches on the investigation of thermal-hydraulic properties, few studies have been conducted to evaluate mechanical properties for the compacted bentonite buffer. For this reason, this paper conducted a series of unconfined compression tests and obtained mechanical properties such as unconfined compressive strength, elastic modulus, and void ratio of Korean compacted bentonite specimens with different water content and dry density values. The unconfined compressive strength and elastic modulus increased, and the Poisson's ratio decreased a little with increasing dry density. It showed that unconfined compressive strength and elastic modulus were proportional to dry density. However, there was not a remarkable correlation between mechanical properties and water content.

Failure Modes of RC Beams with High Strength Reinforcement (고강도 비틀림보강철근을 사용한 철근콘크리트 보의 파괴모드)

  • Yoon, Seok-Kwang;Lee, Su-Chan;Lee, Do-Hyeong;Lee, Jung-Yoon
    • Journal of the Korea Concrete Institute
    • /
    • v.26 no.2
    • /
    • pp.143-150
    • /
    • 2014
  • To avoid abrupt torsional failure due to concrete crushing before yielding of torsional reinforcement and control the diagonal crack width, design codes specify the limitations on the yield strength of torsional reinforcement of RC members. In 2012, Korean Concrete Institute design code increased the allowable maximum yield strength of torsional reinforcement from 400 MPa to 500 MPa based on the analytical and experimental research results. Although there are many studies regarding the shear behavior of RC members with high strength stirrups, limited studies of the RC members regarding the yield strength of torsional reinforcement are available. In this study, twelve RC beams having different yield strength of torsional reinforcement and compressive strength of concrete were tested. The experimental test results indicated that the torsional failure modes of RC beams were influenced by the yield strength of torsional reinforcement and the compressive strength of concrete. The test beams with normal strength torsional reinforcement showed torsional tension failure, while the test beams with high strength torsional reinforcement greater than 480 MPa showed torsional compression failure. Therefore, additional analytical and experimental works on the RC members subjected to torsion, especially the beams with high strength torsional reinforcement, are needed to find an allowable maximum yield strength of torsional reinforcement.

Evaluation of Bond-Slip Behavior of High Strength Lightweight Concrete with Compressive Strength 120 MPa and Unit Weight 20 kN/m3 (압축강도 120 MPa, 단위중량 20 kN/m3 고강도 경량 콘크리트 부착-슬립 거동 평가)

  • Dong-Gil Gu;Jun-Hwan Oh;Sung-Won Yoo
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.11 no.1
    • /
    • pp.39-47
    • /
    • 2023
  • The demand for lightweight and high-strength materials is increasing. However, studies on the bond of concrete and reinforcing bars for high-strength lightweight concrete with a compressive strength of 120 MPa and a unit weight of 20 kN/m3 to structural members are lacking. Therefore, in this paper, 108 specimens of high-strength lightweight concrete with a compressive strength of 120 MPa and a unit weight of about 20 kN/m3 were fabricated, a direct pull-out test was performed, and the bond characteristics were evaluated by comparing the test results with design code. Compared to the decrease in unit weight, the solid bubble shows relatively little reduction in compressive strength and modulus of elasticity. It was f ound to have larger slip and parameter values than concrete with low compressive strength and unit weight.

An Introduction and Technical Review for Screw Compressor Chiller (스크류 냉동기의 소개와 국내외 기술동향)

  • 권병렬
    • Journal of the KSME
    • /
    • v.33 no.11
    • /
    • pp.973-978
    • /
    • 1993
  • 스크류 냉동기의 특징은 CFC계 냉매를 사용하지 않고도 -60.deg. C까지 무난하게 온도를 내릴 수 있어 대체 물질의 사용기술이 취약한 국내사정에 빛추어 볼 때 상당한 시간을 벌 수가 있다. 또한 다른 방식의 압축기에 비해 고효율 운전을 할 수가 있다. 스크류냉동기에서 핵심 부품인 스크류 압축기는 1878년 독일의 Krigar에 의해 원리가 정립되었고, 1934년 스웨덴의 A. Lysholam에 의해 공기 압축기로써 상품화가 되었다. 가까운 일본에서는 1955년 스웨덴의 SRM 사로부터 기술을 도입하여 상품화를 시작하였다. 국내는 1970년대부터 스크류 압축기를 외국으 로부터 수입하고 기타 부속품은 국내에서 제작하는 정도로 성장하고 있다가, 1968년에 K사에서 스웨덴의 SRM사로부터 기술을 도입하여 1단 압축 스크류 냉매압축기를 제작하기 시작하였고, 1991년부터 국내 기술로 2단 압축 반밀폐형 냉매 압축기의 연구 개발에 들어가 92년 말부터 상 품화를 성공시켰다. 이 글에서는 스크류 냉동기의 특징과 구성을 소개하고 특히 스크류 압축기의 원리 및 기술현황에 관하여 언급하고자 한다.

  • PDF

분자류 영역에 따른 터보분자펌프(TMP) 배기속도 측정에 관한 연구

  • Gang, Sang-Baek;Sin, Jin-Hyeon;Cha, Deok-Jun;Jeong, Wan-Seop;Im, Jong-Yeon
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.08a
    • /
    • pp.46-46
    • /
    • 2010
  • 고진공펌프 중의 하나인 터보분자펌프(turbo-molecular pump: TMP)는 반도체/디스플레이 등 첨단 공정에서 진공 환경을 조성하는 핵심장비로서 현재 한국표준과학연구원 진공기술센터에서 개발 중인 고진공펌프 종합특성평가시스템을 구축 중이며, 1000 L/s 및 2500L/s 배기속도 용량을 가지는 터보분자펌프(TMP)의 database를 구축하고 있다. 이에 터보분자펌프(TMP)의 배기속도 측정 시 사용되는 가스의 분자류 영역에 따른 배기속도의 변화를 연구하고자 한다. 터보분자펌프(TMP)의 배기속도는 분자류 영역에 따라 상이한 배기속도를 가진다. 특히 가벼운 분자들은 터보분자펌프(TMP)로 배기시키기 어려우며, 분자량이 작은 가스들은 분자량이 큰가스 분자들에 비해 압축비(compression ratio)도 작아진다. 압축비가 큰 경우에는 실재 운전조건에 무관하게 배기속도가 최대값을 가지지만, 압축비가 작을 경우에는 운전 시 터보분자펌프(TMP)의 압축비에 따라 배기속도가 달라 질 수 있으며, 압축비는 펌프의 inlet에서의 압력과 exhaust에서의 압력의 비이다. 즉, 가벼운 기체 분자(H2, He 등)들은 무거운 기체 분자(N2, Ar 등)들에 비해 배기속력이 작아진다. 현재 개발 중인 한국표준과학연구원 진공기술센터의 고진공 종합특성평가시스템을 이용하여 분자류 영역에 따른 가벼운 기체 분자와 무거운 기체 분자의 배기속도를 측정하여 분자류 영역에 따라 상이한 배기속도의 변화를 연구하고자 한다. 본 논문에서는 터보분자펌프(TMP)의 분자류 영역에 따른 가벼운 기체 He과 무거운 기체 N2를 사용하여 압축비의 변화와 배기속도 측정에 관해 상관관계를 제시하며, 분자류 영역에 따른 터보분자펌프(TMP)의 배기속도 운전성능을 제시하고자 한다.

  • PDF

A High Efficiency Data Compression Scheme Based on Deletion of Bit-plain in Wireless Multimedia Sensor Networks (무선 멀티미디어 센서 네트워크에서 비트-평면 삭제를 통한 고효율 데이터 압축 기법)

  • Park, Junho;Ryu, Eunkyung;Son, Ingook;Yoo, Jaesoo
    • The Journal of the Korea Contents Association
    • /
    • v.13 no.10
    • /
    • pp.37-45
    • /
    • 2013
  • In recent years, the demands of multimedia data in wireless sensor networks have been significantly increased for the high-quality environment monitoring applications that utilize sensor nodes. However, since the amount of multimedia data is very large, the network lifetime is significantly reduced due to excessive energy consumption on particular nodes. To overcome this problem, in this paper, we propose a high efficiency data compression scheme in wireless multimedia sensor networks. The proposed scheme reduces the packet size by a multiple compression technique that consists of primary compression that deletes the lower priority bits considering characteristics of multimedia data and secondary compression based on Chinese Remainder Theorem. To show the superiority of our scheme, we compare it with the existing compression scheme. Our experimental results show that our proposed scheme reduces the amount of transmitted data by about 55% and increases network lifetime by about 16% over the existing scheme on average.

Strength Characteristics on High Strength Concrete against Sulfate Attack (황산염의 침해를 받는 고강도 콘크리트의 강도특성과 물성변화)

  • Park, Young-Shik;Suh, Jin-Kook;Lee, Jae-Hoon;Shin, Young-Shik
    • Magazine of the Korea Concrete Institute
    • /
    • v.10 no.5
    • /
    • pp.117-128
    • /
    • 1998
  • 화학적으로 유해한 환경에 놓인 콘크리트 구조물은 필연적으로 그 기능이 악화되므로 혼화재를 포함한 고강도 콘크리트 또는 혼화재 그 자체가 화학물질에 오염된 환경하에서 어떤 변화를 일으키는가에 대한 연구의 필요성이 점점 증대되고 있다. 따라서 본 논문에서는 건설현장에서 가장 흔히 사용되는 보통강도 콘크리트와 실리카-흄을 포함한 포틀랜드시멘트 경화체인 고강도 콘크리트가 황산염의 침해를 받는 경우에 일어나는 강도특성과 물성변화를 조사하기 위하여 담수와 함께 황산나트륨, 황산마근네슘, 황산나트륨과 황산마그네슘의 혼합용액 등 여러종류의 황산염 용액에 실리카-흄을 사용한 고강도 콘크리트, 낮은 물-시멘트 비의 고강도 콘크리트, 보통강도의 콘크리트 등의 시험체들을 270일간 침지시켜 침지시간에 따른 압축강도 변화와 실리카-흄의 첨가량에 따른 압축강도 변화, 그리고 실리카-흄의 첨가량에 따른 선형팽창량 및 중량변화등에 관한 실험을 수행하였다. 이에 대한 실험결과를 토대로 실리카-흄을 사용한 고강도 콘크리트에 황산염이 미치는 영향을 분석하여 고강도 콘크리트의 실용성을 극대화하기 위한 방안에 대하여 고찰해보았다. 그 결과 실리카-흄을 포함한 고강도 콘크리트는 황산나트륨의 침해에 대해서는 강한 저항성을 나타내지만 황산마그네슘에 대해서는 심각한 침해를 일으키는 것으로 나타났으므로 황산마그네슘에 노출될 우려가 있는 콘크리트 구조물에 고강도를 발현하기 위하여 실리카-흄을 사용하는 것은 구조적으로 큰 문제가 발생할 것으로 사료된다.

A Study on the Prediction of the Strength and Axial Strain of High-Strength Concrete Columns Confined by Tie Reinforcement (띠근 보강 고강도 콘크리트 기둥의 강도 및 축변형 특성 산정에 관한 연구)

  • Park, Hoon-Gyu;Jang, Il-Young
    • Magazine of the Korea Concrete Institute
    • /
    • v.11 no.2
    • /
    • pp.197-208
    • /
    • 1999
  • The use of high-strength concrete which permits smaller cross sections, reduced dead loads, and longer spans has been getting more popular in tall buildings. However, there has been little research on behavior of high-strength concrete columns laterally reinforced with square ties and subjected to compressive loading. With the addition of transverse reinforcement which lead to triaxial compressive state, ductility behavior of high-strength column member shall be increased. In this study, rational quality and quantity evaluations were made to investigate the ultimate strength and strain ductility by confinement effect of tie reinforced high-strength concrete columns subject to uniaxial loads. Concrete failure theory at the triaxial compressive state and statistical results based on conventional experimental data were applied for this propose. Up to 185 columns, tested under monotonically increasing concentric loading, were evaluated in terms of strength and strain ductility. Analytical results show that confinement stress, maximum compressive strength, and increase of strain equations were developed with the consideration of concrete strength, yield strength, spacing, volumetric ratio, and configurations of tie reinforcement.