• Title/Summary/Keyword: 고수밀

Search Result 13, Processing Time 0.025 seconds

Estimation of maximum measurable depth using hyperspectral image (초분광 영상을 활용한 최대추정가능수심 산정 기법 개발)

  • Seo, Youngcheol;Kim, Dongsu;You, Hojun;Kwon, Yeonghwa
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2022.05a
    • /
    • pp.444-444
    • /
    • 2022
  • 하천 수심 계측은 수심을 사람이 직접 계측하거나 초음파 기반 유속계 (ADCP) 등 최신 계측기기를 이용하여 간접적으로 계측을 실시하고 있다. 하지만 사람이 직접 하천에서 수심을 측정하는 것은 위험이 동반되고, 수심자료의 측정오차가 크게 발생한다. 따라서 수심측정에서 직접 측정 방식의 한계를 극복하기 위해, 초분광 영상의 반사도와 수심이 높은 상관관계를 보이는 것을 활용하여, 초분광 영상 기반 수심 산정 기법을 개발하였다. 초분광 영상 기반 수심 산정 기법은 복수의 파장이 존재하는 초분광영상으로부터 두 개의 파장대의 밴드를 추출하여 모든 경우의 수에 대해 밴드비를 산정한 후, 실측수심과 밴드비 간의 회귀분석을 실시하여 상관계수가 가장 높은 회귀식을 찾아내는 방식이 최적 밴드비 분석법에 기반한다. 최적 밴드비 분석법을 통해 획득된 높은 상관성의 밴드비-수심 관계식을 이용하여 수심을 추정할 수 있다. 이러한 방법은 직접 수심 측정 방식에 비해, 높은 해상도와 밀도, 양질의 데이터를 수집할 수 있는 장점이 있다. 과거 연구에 따르면 저수심부에서의 높은 정확도의 수심추정 결과를 보였지만, 고수심부에서는 실측수심과의 오차도 높아지는 등 정확성이 떨어지는 경향을 보인다. 따라서 본 연구에서는 보다 효율적인 수심계측을 할 수 있도록 최적 밴드비 분석법을 활용한 수심추정에서 신뢰성 있는 수심의 범위를 파악할 수 있는 방법을 제시하고자 한다. 본 연구에서는 대상지역으로 낙동강 본류와 황강 지류 합류부로 선정하였고, 초음파 기반 유속계(ADCP)와 드론을 활용하여 실측수심과 초분광 영상을 취득하였다. 민감도 분석을 위한 수심자료를 0.5m 단위로 분할하였으며, 구간별로 최적 밴드비 분석을 실시하였다. 그 결과, 구간별로 산정된 상관계수와 평균제곱근오차 (RMSE)를 통해 정확도가 높은 구간을 구별할 수 있었다. 또한 해당 구간을 초과하는 수심은 초분광 영상을 통해 추정이 어려운 것으로 판단되며, 분석한 구간까지를 최대 추정 가능 수심으로 정의하였다. 마지막으로 검증을 위해 최대추정가능수심으로 판단된 구간까지의 데이터만 활용하여 최적 밴드비 분석법을 적용하여 상관계수나 평균제곱근오차 결과의 개선여부 확인을 통해, 본 연구에서 제시한 방법이 정확한 최대추정가능수심 구간을 산정할 수 있는지 확인하였다.

  • PDF

On the High Yield Pulping of Fir by Pressurized Refining (가압(加壓)리화이닝법(法)에 의한 젓나무의 고수율(高收率)펄프 제조(製造)에 관한 연구(研究))

  • Cho, Nam Seok;Jo, Byoung Muk
    • Journal of Korean Society of Forest Science
    • /
    • v.53 no.1
    • /
    • pp.44-55
    • /
    • 1981
  • Neutral sulfite precooked fir chips were refined in the Asplund Laboratory Defibrator at various temperature ($20^{\circ}C$, $120^{\circ}C$ and $180^{\circ}C$). The effects of refining temperatures on the physical property and morphological structure of the resulting pulps were discussed. Yields of precooked chips (84%, 92% and 100%) and refining temperature affected remarkably the yield of refined pulp, its beatability, sheet strength and morhphological characteristics. Pulp yield and beatability decreased with increasing refining temperature. Fiber surface of unbeaten pulp from precooked chips of 84% yield was to some extent covered by the secondary wall, while that of the pulp form precooked yield of 92% by the compound middle lamella. In the case of uncooked chips, fibers were damaged heavily, and the exposed fiber surface resulted from the equal amount of the secondary wall and the compound middle lamella. In the case of pulps prepared from precooked chips of higher yields (92% and 100%), sheet strength increased linearly as sheet density increased. But at the same sheet density, pulp from lower precooked yield (84%) had better sheet strength after open discharge refining as compared to pressurized refining, because pulp from the former had much amounts of fines fraction of higher water retention value than the latters. And there was observed a little difference in fiber length distribution but nearly similar in its morphology with increasing refining temperature.

  • PDF

Seasonal Variation Characteristics of Zostera marina L. in HAENAM SAGUMI on the Southern Coast of Korea (해남 사구미 연안 거머리말(Zostera marina L.)의 계절특성)

  • Ok, Jae Seung;Lee, Sang Yong;Shin, Kyung Hoon;Kim, Hi Joong
    • Korean Journal of Ecology and Environment
    • /
    • v.46 no.4
    • /
    • pp.513-523
    • /
    • 2013
  • This ecological study was conducted to analyze seasonal variation characteristics of Zostera marina at HAENAM SAGUMI on the Southern Coast of Korea. Environmental characteristics, plant morphological characteristics, shoot density, biomass, and leaf production were monitored from August 2008 to March 2011. Zostera marina occurred in the subtidal zone from 0 to 2.5 m below the mean low water level. Water temperature showed a clear annual pattern, with increase in spring and summer, and decreases in fall and winter. Irradiance showed seasonal variation, even though daily weather condition has short-term variation in the incident irradiation. Plant morphological characteristics, shoot density, biomass, and leaf production showed clear seasonal variation. Seasonal variation in the above biomass of Zostera marina was mainly caused by changes in shoot length. We found that there are correlations between environmental characteristics (water temperature, irradiation) and the growth of Zostera marina. There is stronger correlation between water temperature and the growth of Zostera marina, compared to the correlation between irradiation and the growth of Zostera marina. In particular, the growth of Zostera marina is inhibited by both higher and lower water temperature.