• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1579-1588
• /
• 2014

The LAN method is the most widely used in domestic high-speed internet access and rapidly moving to 1 Gbps Ethernet from 100 Mbps one to provide high-speed services such as UHD TV. The 1000BASE-T PHY with 4 pairs UTP transmits a PAM-5 signal at the 125 MHz clock per each pair to achieve 1 Gbps rate. In order to correct errors over the channel, the transmitter uses a TCM which is combined the convolutional encoder and PAM-5, and the receiver uses the Viterbi decoder. In this paper, we implement a Viterbi decoder which can correct two pair errors and operate at the least 125 MHz clock speed. Finally, we will verify the error correction function and the operating speed of the implemented decoder with a logic analyzer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10A
• /
• pp.1021-1028
• /
• 2002

This paper proposes a method to extract the content curve that reflects changes in video content from the MPEG video in the compressed domain, and also describes a video summary generation technique which can read video effectively and rapidly from the content curve. Existing video summary techniques have a disadvantage of taking significant amount of time to generate the video summary due to complex calculations in the decoding process. Moreover, the existing techniques, which use video content curve, require to perform many calculations to process the high dimensional content curve. However, the proposed technique generates video summary fast via the linear approximation of the proposed curve, after extraction the two dimensional content curve directly. In addition, the proposed technique has a merit that the user can set any number of key-frames and amount of calculation that form the video summary.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6A
• /
• pp.420-425
• /
• 2012

A forward error correction (FEC) coding techniques is one of time diversity techniques with which the effect of channel impairments due to noise and fading are spreaded over independently, and thus the performance could be improved. Therefore, the performance of the FEC scheme can be maximized if we minimize the correlation of channel information across over a codeword. In this paper, we propose a block turbo code with the maximized time diversity effect which may be reduced due to utilization of high order modulation schemes and due to transmission over a comparatively fast fading environment. Especially, we propose a very simple formula to calculate the address of coded bit allocation, and thus we do not need any additional outer interleavers, i.e., inter-codeword interleavers. The simulation resuts investigated in this paper reveal that the proposed scheme can provide the performance gain of more than a few decibels compared to the conventional schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12C
• /
• pp.1669-1676
• /
• 2004

In H.264, 7 modes {16${\times}$16, 16${\times}$8, 8${\times}$16, 8${\times}$8, 8${\times}$4, 4${\times}$8, 4${\times}$4) are used to enhance the coding efficiency. The motion vector estimation with 7 modes may require huge computing time. In this paper, to speed up the motion vector estimation procedure while the high image quality remains, we propose a motion vector refinement scheme using the temporary motion vector generated with little computation. The proposed estimation process consists of three phases: Mode decision for a 16${\times}$16 macroblock, Composing a temporary motion vector, Refinement of the temporary motion vector. We demonstrate the effectiveness of the proposed method by computer simulation. In the results, the encoding time consumed by the proposed scheme has been reduced significantly while the encoded video quality remains unchanged.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.10
• /
• pp.586-594
• /
• 2003

X-Match algorithm is a lossless compression algorithm suitable for hardware implementation owing to its simplicity. It can compress 32 bits per clock cycle and is suitable for real time compression. However, as the bus width increases 64-bit, the compression unit also need to increase. This paper proposes the cooperative parallel X-Match (X-MatchCP) algorithm, which improves the compression speed by performing the two X-Match algorithms in parallel. It searches the all dictionary for two words, combines the compression codes of two words generated by parallel X-Match compression and outputs the combined code while the previous parallel X-Match algorithm searches an individual dictionary. The compression ratio in X-MatchCP is almost the same as in X-Match. X-MatchCP algorithm is described and simulated by Verilog hardware description language.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.4
• /
• pp.67-73
• /
• 2002

There have been increased concerns on mobile stratospheric communication system(SCS) for the purpose of advanced service of personal and high speed communication systems. In fact, this SCS is considered and studied for IMT-2000 service by ITU. Although, it is important to make accurate channel model for prediction of the SCS performance, there is no measured channel data in this system. Thus, in this paper, we estimate the performance of SCS bye use of channel model provided by Corazza(2) and modified by You(3). And also, the effects of channel codings on system performance are analyzed by deriving bit error performance based on realistic Rician log-normal fading channel models. The performance results are divided into three kinds of areas with three kinds of elevation angles 20$^\cire$, 45$^\cire$, and 80$^\cire$. And also the effects of forward error correction channel codings on system performance with Hamming(7,4), HCH( IS,7) and convolutional code of constraint length 3 and code rate R=1/2.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.541-546
• /
• 2004

Space-Time Coding(STC) is a technique that utilizes joint correlation of transmitted signals in both time and space domains. Through this approach, diversity and coding gains can be simultaneously obtained. In this paper, we use SPW simulation tool to implement the IEEE 802.11a system. Based on this system, OFDM system with STC and convolutional coder concatenated is implemented. The system performance is analyzed and compared with the performance of the IEEE 802.11a system. The simulation results show that the performance with concatenated codes at a data rate of 6Mbps shows approximately a 5dB gain over the system with the convolutional code only. At a data rate of 12Mbps, the performance with concatenated codes is further improved by approximately 6dB.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.11
• /
• pp.107-113
• /
• 2013

Mobile mobility and data reliability should be guaranteed as well as amounts of data services are essential in the era of smart media. In order to improve the reliability of high-speed data, strong channel coding and modulation techniques are required. In this paper, the structure of Turbo TCM decoder, applying high-order modulation techniques and the DPSAM method which improves performances in time-selective fading channels in the case of burst errors are suggested through the optimal decoding method and iteration decoding so as to improve bandwidth efficiency in Turbo Codes with excellent encoding gain. The proposed method in comparison with the existing method is that 3dB is superior in case that BER is $10^{-2}$ and the number of iterations is 3. In addition, the function is improved at approximately 6dB in case that BER is $10^{-3}$ and the number of iterations is 7. The proposed method requires additional bandwidth; however, the bandwidth loss can be overcome through Turbo TCM technology on the additional bit rate from the bandwidth loss.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.587-592
• /
• 2020

The giant information exchange enabled by the Internet of Things paradigm will likely exploit electrical lines as a ready-to-use infrastructure. The advantage of using the pre-installed infrastructure of wiring networks makes power line communication a competitive technology for broad-band communications. Therefore, there has been a growing interest towards the use of existing power line communication channels as an effective means for transmitting high speed data and Internet service. One of the main noise types affecting power line communication systems is the impulsive noise, and the focus of this work is on the impact of this impulsive noise on the performance of OFDM-QPSK systems. For the performance analysis of impulsive noise, data measured in three environments were used. Through the analysis, it is shown that OFDM-QPSK system outperforms QPSK system for most of the impulsive noise cases. Also, RS-coded OFDM-QPSK system can achieve good BER performance under 3 cases impulsive noise environment.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1068-1074
• /
• 2011

In this paper, the proposed scheme is STBC(space-time block codes) system combined with convolution code which is the most popular channel coding to ensure the reliability of data transmission for a high data rate wireless communication. The STBC is one of MIMO(multi-input multi-output) techniques. In addition, this scheme uses a modified viterbi algorithm in order to get a high system gain when data is transmitted. Because we combine STBC and convolution code, the proposed scheme has a little high quantity of computation but it can get a maximal diversity gain of STBC and a high coding gain of convolution code at the same time. Unlike existing viterbi docoding algorithm using Hamming distance in order to calculate branch matrix, the modified viterbi algorithm uses Euclidean distance value between received symbol and reference symbol. Simulation results show that the modified viterbi algorithm improved gain 7.5 dB on STBC 2Tx-2Rx at $BER=10^{-2}$. Therefore the proposed scheme using STBC combined with convolution code can improve the transmission reliability and transmission efficiency.