• 기계와재료
• /
• v.6 no.3 s.21
• /
• pp.69-84
• /
• 1994

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.8-14
• /
• 2003

곡선부가 많은 국내 기존선의 속도향상을 위한 틸팅차량의 개발은 기존선의 전철화에 따른 고속화를 위해 그 필요성이 부각되고 있다. 일반 고속차량과 다른 주행 메카니즘을 가지고 있는 틸팅차량의 주요 기술을 확보하기 위한 틸팅대차와 틸팅시스템의 개발과 연구는 한국철도의 기술력 향상에 큰 역할을 할 것이다. 180km/h급 한국형 틸팅차량의 틸팅 메카니즘 기구동역학 해석을 통하여 틸팅 대차를 형성하는 주요 파라메터들의 변화에 따른 틸팅 메카니즘의 특성과 영향력을 검토한다. 이를 통하여 최적의 틸팅운동을 수행할 수 있는 주요 파라메터의 값을 제시함으로서 틸팅차량이 요구하는 최적의 틸팅 메카니즘을 구현하고자 한다. 이 연구를 통해서 얻어지는 결과들은 팅팅 대차용 엑츄에이터의 성능 설계와 해석의 기반 자료로 사용되어진다.

• Journal of the Korean Society for Railway
• /
• v.15 no.4
• /
• pp.315-322
• /
• 2012

In a tunnel, interior noise of a high speed train increases by 5dB~7dB. The reason is that the sound intensity of the acoustic field in the tunnel significantly increases by the reflected waves occurred in the closed space. Especially, the incident acoustic power largely increases on the outside of the compartment side panel and large transmission of noise is available through the side panel and the glass window. In this paper, the sound insulation strategy in the tunnel is proposed for the next generation high speed train under development. Specimens of the aluminum extruded panels, layered panels and double glazed window are manufactured and intensity transmission loss is measured according to ASTM E2249-02. Based on the measured data, problems in the sound insulation performance are diagnosed and the sound insulation strategy is reviewed on each panel and layered structures.

• Journal of the Korean Society for Railway
• /
• v.14 no.4
• /
• pp.333-340
• /
• 2011

The purpose of this paper is to develop two kinds of finite element models for the heavy deformable obstacle defined in grade crossing collision scenario of the Europe TSI and the Korean rolling stock safety regulations and to apply the crashworthiness evaluation for the Korean high-speed EMU with the FE model. The numerical models of the heavy obstacle were changed from a past rigid one to a current deformable one whose stiffness requirement should be verified by a collision simulation defined in the regulations. Through several trial simulations, two types of numerical models for the heavy obstacle were developed, which satisfied physical properties specifies in the regulations. One is a solid-type obstacle with uniform density and the other is a shell-type. With the obstacles developed in this study, the grade crossing collision scenario for Korean high-speed EMU was simulated and evaluated for the two-type obstacle models. From the simulation results, the shell and solid-type obstacles showed quite different behaviors after collision, and the shell type model gave more severe results.

• Journal of the Korean Society for Railway
• /
• v.16 no.1
• /
• pp.7-13
• /
• 2013

A scaled version of a roller rig is developed to demonstrate the dynamic characteristics of a railway vehicle for academic purposes. This rig is designed based on Jaschinski's similarity law. It is scaled to 1/10 of actual size and allows 9-DOF motion to examine the up and down vibration of a train set. The test rig consists of three sub-hardware components: (i) a driving roller mechanism with a three-phase AC motor and an inverter, (ii) a bogie structure with first and second suspensions, and (iii) the vehicle body. The motor of the rig is capable of 3,600rpm, allowing the test to simulate a vehicle up to a maximum speed of 400Km/hr. Because bearings and joints are properly connected to the sub-structures, various motion analyses, such as a lateral, pitching, and yawing motion, are allowed. The slip motion between the rail and the wheel set is also monitored by several sensors mounted in the rig. After the construction of the hardware, an experiment is conducted to obtain the natural frequencies of the dynamic behavior of the specimen. First, the test rig is run and data are collected from six sets of accelerometers. Then, a numerical analysis of the model based on the ADAMS program is derived. Finally, the measurement data of the first three fundamental frequencies are compared to the analytical result and the validation of the test rig is conducted. The results show that the developed roller rig provides good accuracy in simulating the dynamic behavior of the vehicle motion. Although the roller rig designed in this paper is intended for academia, it can easily be implemented as part of a dynamic experiment of a bogie and a vehicle body for a high-speed train as part of the research efforts in this area.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.3
• /
• pp.339-346
• /
• 2012

The pre-evaluation of the current-collection performance is an important issue for high-speed railway vehicles. In this paper, using flexible multibody dynamic analysis techniques, a simulation model of the dynamic interaction between the catenary and pantograph is developed. In the analysis model, the pantograph is modeled as a rigid body, and the catenary wire is developed using the absolute nodal coordinate formulation, which can analyze large deformable parts effectively. Moreover, for the representation of the dynamic interaction between these parts, their relative motions are constrained by a sliding joint. Using this analysis model, the contact force and loss of contact can be calculated for a given vehicle speed. The results are evaluated by EN 50318, which is the international standard with regard to analysis model validation. This analysis model may contribute to the evaluation of high-speed railway vehicles that are under development.

• Computational Structural Engineering
• /
• v.11 no.3
• /
• pp.253-262
• /
• 1998

본 연구에서는 경부고속철도의 주요 교량형식인 PSC 박스교량을 3차원 뼈대요소를 사용하여 모형화하였으며, 궤도불규칙성의 형상은 지수 스펙트럴 밀도함수를 사용하여 생성시켰다. 경부고속철도차량(K-TGV)중 동력차는 17자유도의 3차원 주행열차로 모형화하였고, 이러한 교량, 궤도불규칙성 및 차량 모형을 이용하여 교량과 차량의 상호작용을 해석할 수 있는 프로그램을 개발하였다. 동적해석을 위한 교량과 차량의 운동방정식은 Lagrange 방정식을 사용하여 유도하였으며, 운동방정식의 수치해석에는 Newmark-β법을 사용하였다. 개발된 프로그램을 이용하여 동력차의 주행에 의한 교량의 시간이력곡선을 구하였으며, 궤도불규칙성의 영향을 분석하였다. 또한 도상의 유무에 따른 교량동적거동의 특성과 함께 열하중의 편심의 영향도 분석하였다.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.242-244
• /
• 2004

현재, 고속철도차량의 국내기술확보를 위해 한국형 고속전철이 개발되어 단품시험, 완성차시험, 공장시험 등을 통해 기본적인 성능을 확인한 후 현재는 본선시운전 시험을 실시하고 있다. 시제차량의 성능 및 기능을 종합적이고 효율적으로 확인하기 위해 고속철도 시운전시험시 상시 계측시스템을 시제차량에 설치하여 운영하고 있다. 본 논문에서는 상시계측시스템을 이용하여 보조전원장치에 대한 고장진단을 실시한 것에 대하여 기술하였다.

• Journal of KSNVE
• /
• v.3 no.2
• /
• pp.95-102
• /
• 1993

고속철도를 포함한 철도운행에 있어서 소음문제는 중요한 환경문제의 하나 이다. 지금까지 철도소음에 관한 국내에서의 연구는 철도소음 기준과 관련된 일부 연구를 제외하고는 거의 없는 상황이다. 앞으로 고속철도의 성공적인 운행을 위하 여는 선로변에서의 소음저감 대책으로 지형과 궤도조건에 따른 소음피해 예측과 소음원 특성을 고려한 효과적인 방음설계에 대한 연구가 필요하다. 또한 경부고속 철도 노선에 터널이 많으므로 터널 미기압파의 발생과 그대책에 대한 연구가 필요할 것으로 생각된다. 이와 더불어 국산화 차량 개발을 위하여 차체와 판토그래프에서의 공력소음감소를 위한 공력해석, 전동소음과 구조물 소음 감소를 위한 차륜과 쾌도의 개선, 추진장치와 보조장치의 소음제어설계 등 각각의 소음발생원에 대한 이해와 소음저감 기술의 개발이 필요하다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.175-181
• /
• 2016

This occurs when the unbalanced rotating body is inconsistent with the mass center line axis geometric center line. Wheelsets are assembled by a single axle with two wheels and a rotating body of a running railway vehicle. Owing to non-uniformity of the wheel material, the wear, and error of the wheel and axle assembly may cause an imbalance. Wheelsets will suffer the effects of vibrations due to the unbalanced mass, which becomes more pronounced due to the thin and high-speed rotation compared to the shaft diameter This can affect the driving safety and the running behavior of a rail car during high-speed running. Therefore, this study examined this unbalanced wheel using a railway vehicle multibody dynamics analysis tool to assess the impact of the dynamic VI-Rail movement of high-speed railway vehicles. Increasing the extent of wheel imbalance on the analysis confirmed that the critical speed of a railway vehicle bogie is reduced and the high-speed traveling dropped below the vehicle dynamic behaviour. Therefore, the adverse effects of the amount of a wheel imbalance on travel highlight the need for management of wheel imbalances. In addition, the static and dynamic management needs of a wheel imbalance need to be presented to the national rail vehicles operating agency.