• Information and Communications Magazine
• /
• v.25 no.7
• /
• pp.10-15
• /
• 2008

최근 고속도로의 길이와 운전 차량 수가 빠른 속도로 증가하고 있어 운전자들에게 고속도로 교통상황를 신속하고 정확하게 제공하는 것이 중요한 문제로 대두되고 있다. 고속도로통행료수납시스템(TCS: Toll Collection Systrem)은 전국 고속도로를 주행하는 차량의 통행 정보를 실시간으로 제공하므로 교통 상황 예측에 유용하게 활용될 수 있다. TCS 자료는 차량이 입구영업소를 통과한 후 출구영업소를 통과하는 데 소요된 시간으로서, 운전한 시간, 휴게소 체류시간 등을 모두 포함한 통행시간으로 운전자의 운전 특성, 통행 목적, 피로의 정도에 따라 편차가 크게 나타난다. TCS 자료의 통행시간을 기초로 예측된 정보는 이러한 불확실성을 포함하고 있기 때문에 이를 활용하기 다양한 데이터처리 기법이 필요하다. 본 논문에서는 TCS 자료의 효율적인 전처리 및 교통 예측 기법 현황에 대하여 기술하고 향후 발전 방향을 제시하였다.

• Journal of Korean Society of Transportation
• /
• v.20 no.4
• /
• pp.151-162
• /
• 2002

The object of this study is to develop an operating time prediction model for expressways using toll collection data. A Prediction model based on modular neural network model was developed and tested using real data. Two toll collection system(TCS) data set. Seoul-Suwon section for short range and Seoul-Daejeon section for long range, in Kyongbu expressway line were collected and analyzed. A time series analysis on TCS data indicated that operating times on both ranges are in reasonable prediction ranges. It was also found that prediction for the long section was more complex than that for the short section. However, a long term prediction for the short section turned out to be more difficult than that for the long section because of the higher sensitivity to initial condition. An application of the suggested model produced accurate prediction time. The features of suggested prediction model are in the requirement of minimum (3) input layers and in the ability of stable operating time prediction.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.147-155
• /
• 2005

The purpose of this paper is to develop a method for estimation of reliable path-travel time using data obtained from the toll collection system on freeways. The toll collection system records departure and arrival time stamps as well as the identification numbers of arrival and destination tollgates for all the individual vehicles traveling between tollgates on freeways. Two major issues reduce accuracy when estimating path-travel time between an origin and destination tollgate using transaction data collected by the toll collection system. First, travel time calculated by subtracting departure time from arrival time does not explain path-travel time from origin tollgate to destination tollgate when a variety of available paths exist between tollgates. Second, travel time may include extra time spent in service and/or rest areas. Moreover. ramp driving time is included because tollgates are installed before on-ramps and after off-ramps. This paper describes an algorithm that searches for arrival time when departure time is given between tollgates by a Progressive Iterative Forward and Backward (PIFAB) search method. The algorithm eventually produces actual path-travel times that exclude any time spent in service and/or rest areas as well as ramp driving time based on a link-based procedure.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.209-221
• /
• 2009

Travel time estimation under given traffic conditions is important for providing drivers with travel time prediction information. But the present expressway travel time estimation process cannot calculate a reliable travel time. The objective of this study is to estimate the path travel time spent in a through lane between origin tollgates and destination tollgates on an expressway as a prerequisite result to offer reliable prediction information. Useful and abundant toll collection system (TCS) data were used. When estimating the path travel time, the path travel time is estimated combining the link travel time obtained through a preprocessing process. In the case of a lack of TCS data, the TCS travel time for previous intervals is referenced using the linear interpolation method after analyzing the increase pattern for the travel time. When the TCS data are absent over a long-term period, the dynamic travel time using the VDS time space diagram is estimated. The travel time estimated by the model proposed can be validated statistically when compared to the travel time obtained from vehicles traveling the path directly. The results show that the proposed model can be utilized for estimating a reliable travel time for a long-distance path in which there are a variaty of travel times from the same departure time, the intervals are large and the change in the representative travel time is irregular for a short period.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.1005-1008
• /
• 2011

본 논문에서는 교통 이력자료의 시공간 데이터를 활용하여 교통 분석 및 예측에 필요한 신뢰성 높은 데이터를 제공하기 위한 TCS/HI-PASS 전처리 알고리즘을 제안한다. 시공간 데이터의 전처리 알고리즘은 각종 교통정보에 이용되고 있으며, 그 중 대표적으로 활용되고 있는 것이 차량 검지기(VDS)를 통해 수집된 교통량, 속도, 점유율 정보이다. 이러한 정보에 가공처리 알고리즘을 적용하여 공간평균속도 기반의 통행시간을 산정하고 있으며, 고속도로 통행료 수납시스템(TCS)으로 부터는 출발영업소와 도착영업소의 진 출입시간을 기반으로 평균통행시간을 산정하고 있다. 본 연구에서는 차량 검지기(VDS) 데이터와 기존 TCS 데이터의 전처리 알고리즘을 분석하여 TCS와 HI-PASS 데이터 기반의 개선된 전처리 알고리즘을 설계, 구현하였다.