• Journal of Korean Society of Transportation
• /
• v.17 no.2
• /
• pp.21-27
• /
• 1999

The objective of this study is to clarify the relationship between accident rate and V/C for freeway facility. The relationship can be used as a basic reference to predict and prevent traffic accident. The traffic volume and the number of accidents from 1992 to 1997 on Shingal-Ansan Freeway were analyzed in this study to clarify the relationship. Hourly accident rate and V/C were calculated for each facility sections : basic freeway section, tunnel section and toll gate section. The accident rate models consisting of an independent variable of V/C were established by repression analysis and compared with each other. The relationship between accident rates and V/C ratios represented U-shaped pattern for all sections. The result of this study indicates that accident rates are highest in the low hourly V/C range, decrease with increasing V/C ratio, and then increase as the V/C ratio increases. The accident rate of toll gate section is in general higher than that of other sections. Although the accident rate of tunnel section is higher than that of basic freeway section when V/C is above 0.67, there is no significant difference of accident rate between basic freeway and tunnel section when V/C is between 0.5 and 0.8. Basic freeway tunnel and toll gate section have the minimum accident rate when V/C is 0.78, 0.75 and 0.57 respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.3
• /
• pp.116-130
• /
• 2023

Expressways play pivotal roles in cargo transportation because of their superior accessibility and mobility compared to rail and air. On the other hand, there is a limit to the accurate calculation of cargo transportation performance using existing highways owing to the mixture of vehicle types and difficulty in identifying cargo loads of individual cargo vehicles. This paper presents an algorithm for calculating more reliable cargo transportation performance using big data. The traffic performance (veh·km/day) was derived using the data collected from Toll Collecting System. The average tolerance weight for each vehicle type and the cargo load unit (ton/unit) considering it was calculated using vehicle specification information data and high-speed and low-speed axis data. This study calculated the cargo transportation performance by section and type using various online integrated highway data and presented a method for calculating the transportation performance by linking open business offices and private highways.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.3
• /
• pp.521-528
• /
• 2016

The tollbooths of a main motorway toll plaza are usually operated proactively responding to the variations of traffic demands of two-type vehicles, i.e. cars and the other (heavy) vehicles, respectively. In this vein, it is one of key elements to forecast accurate traffic volumes for the two vehicle types in advanced tollgate operation. Unfortunately, it is not easy for existing univariate short-term prediction techniques to simultaneously generate the two-vehicle-type traffic demands in literature. These practical and academic backgrounds make it one of attractive research topics in Intelligent Transportation System (ITS) forecasting area to forecast the future traffic volumes of the two-type vehicles at an acceptable level of accuracy. In order to address the shortcomings of univariate short-term prediction techniques, a Multiple In-and-Out (MIO) forecasting model to simultaneously generate the two-type traffic volumes is introduced in this article. The MIO model based on a non-parametric approach is devised under the on-line access conditions of large-scale historical data. In a feasible test with actual data, the proposed model outperformed Kalman filtering, one of a widely-used univariate models, in terms of prediction accuracy in spite of multivariate prediction scheme.

• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.205-215
• /
• 2008

As static traffic assignment has reached its limitation with ITS policy applications and due to the increase of interest in studies of ITS policies since the late 1980's, dynamic traffic assignment has been considered a tool to overcome such limitations. This study used the Dynameq program, which simulates route choice behavior by macroscopic modeling and dynamic network loading and traffic flow by microscopic modeling in consideration of the feasibility of the analysis of practical traffic policy. The essence of this study is to evaluate the feasibility for analysis in practical transportation policy of using the dynamic traffic assignment technique. The study involves the verification of the values estimated from the dynamic traffic assignment with South Korea's expressway network and dynamic O/D data by comparing results with observed link traffic volumes. This study used dynamic O/D data between each toll booth, which can be accurately obtained from the highway Toll Collection System. Then, as an example of its application, exclusive bus-lane policies were analyzed with the dynamic traffic assignment model while considering hourly variations.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.531-534
• /
• 2007

원격모니터링 통합모델은 고속도로나 유료도로의 영업소 요금수납 체계의 하부시스템 (요금수납시스템, ETCS시스템, 위반차량촬영시스템, 축중시스템)의 구성 및 장애 현황을 감시하고, 장애 발생에 대한 장애처리 체계를 수행하는 모델이다. 본 논문에서는 실시간 장애감시, 효율적 WorkFlow 구성 및 차별화된 정보를 제공하기 위해서 감시 S/W 엔진과 DBMS(Database Managemnet System) 기반의 C/S (Client /Server)시스템을 구성하고 WEB기반의 환경을 설계한다. 본 통합모델을 구현함으로써 체계적인 구성관리/장애관리를 통한 효율적인 유지관리 업무가 가능하며, 현장 장비의 상태 파악이 조기에 용이하여 장애 시간을 최소화 할 수 있다. 또한 Data의 지식 DB화를 통하여 유사 장애에 대한 조치가 용이하다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.1005-1008
• /
• 2011

본 논문에서는 교통 이력자료의 시공간 데이터를 활용하여 교통 분석 및 예측에 필요한 신뢰성 높은 데이터를 제공하기 위한 TCS/HI-PASS 전처리 알고리즘을 제안한다. 시공간 데이터의 전처리 알고리즘은 각종 교통정보에 이용되고 있으며, 그 중 대표적으로 활용되고 있는 것이 차량 검지기(VDS)를 통해 수집된 교통량, 속도, 점유율 정보이다. 이러한 정보에 가공처리 알고리즘을 적용하여 공간평균속도 기반의 통행시간을 산정하고 있으며, 고속도로 통행료 수납시스템(TCS)으로 부터는 출발영업소와 도착영업소의 진 출입시간을 기반으로 평균통행시간을 산정하고 있다. 본 연구에서는 차량 검지기(VDS) 데이터와 기존 TCS 데이터의 전처리 알고리즘을 분석하여 TCS와 HI-PASS 데이터 기반의 개선된 전처리 알고리즘을 설계, 구현하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.1
• /
• pp.58-70
• /
• 2020

Detour behavior on the expressway means that the driver uses the local road by passing the part of the expressway which is stagnant at the time of the traffic demand such as holidays. Since the detour rate was estimated through the survey at toll gate in the past, there was a difficulty in estimating the actual detour rate due to the small sample of the survey. In this study, we use DSRC-based route travel data to conduct empirical studies on detour patterns such as the estimation of actual detour rate, the improvement of travel time using detour road, and the correlation between traffic conditions on the expressway and detour rate. On the day of Chuseok and the day before Chuseok, the analysis of Giheung-DongtanIC→OsanIC and Seopyeongtaek IC→Walgott JC showed that the use of detour roads increased gradually during the congestion of the main line and travel time reduced when using detour roads, However, when the traffic congestion of the main line is not severe, the travel time increases when using the detour roads. The correlation between the traffic condition of the expressway and the actual detour rate has a negative correlation, which is consistent with the congestion pattern of the main line. The results of this study can be used to overcome limitations of detour pattern research based on surveys in the past and to establish a detour strategy for expressway sections where traffic demand is concentrated.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6D
• /
• pp.569-575
• /
• 2010

The occupancy based O/D is essential for measuring efficiency of various transportation policies like HOV/HOT lane, ramp metering, and public parking station. There has been many studies on occupancy survey methodology and O/D estimation using TCS (Toll Collection System) data separately. The occupancy O/D estimation methodology using TCS data has not been attempted thus far. An overall process from data collection stage to the occupancy O/D estimation stage has been suggested. Field survey was performed at the northbound Seoul toll station of Gyeongbu Expressway by each 2 hours of AM peak, PM non-peak, PM peak, midnight periods on a day. The process of matching the TCS data and field survey data classified by tollbooth ID, car type/mode, and arrival time was also performed. One typical output of the results showed that the ratio of single occupancy vehicles bounding for Seoul during the AM peak amounted to 60%. With the key output of this study and the specific O/D estimation methodology suggested, the whole centroid-to-centroid occupancy O/D of the country could be available, and then various applications in which the occupancy information is required could be possible.

• Journal of Korean Society of Transportation
• /
• v.35 no.5
• /
• pp.458-467
• /
• 2017

The expressway of the Korea has an important role in freight movement because 76 percent of the commodity is transported by trucks. However, there has been few indices on the role of expressways regarding freight transportation and truck traffic. The objective of this study is to propose four freight transportation related indices using ITS-related system such as TCS and HS-Wim: total truck's travel miles ($veh{\cdot}km/year$), total freight transport miles ($ton{\cdot}km/year$). efficiency of truck's travel ($veh{\cdot}km/km$), and efficiency of freight movement ($ton{\cdot}km/km$). These truck and freight related indices were estimated and compared by two different data sources: traffic volume data using VDS and OD data using TCS. These indices were designed to estimated on real time and updated every day and month.

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.209-221
• /
• 2009

Travel time estimation under given traffic conditions is important for providing drivers with travel time prediction information. But the present expressway travel time estimation process cannot calculate a reliable travel time. The objective of this study is to estimate the path travel time spent in a through lane between origin tollgates and destination tollgates on an expressway as a prerequisite result to offer reliable prediction information. Useful and abundant toll collection system (TCS) data were used. When estimating the path travel time, the path travel time is estimated combining the link travel time obtained through a preprocessing process. In the case of a lack of TCS data, the TCS travel time for previous intervals is referenced using the linear interpolation method after analyzing the increase pattern for the travel time. When the TCS data are absent over a long-term period, the dynamic travel time using the VDS time space diagram is estimated. The travel time estimated by the model proposed can be validated statistically when compared to the travel time obtained from vehicles traveling the path directly. The results show that the proposed model can be utilized for estimating a reliable travel time for a long-distance path in which there are a variaty of travel times from the same departure time, the intervals are large and the change in the representative travel time is irregular for a short period.