• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.9
• /
• pp.381-392
• /
• 2013

During the last decade, the multitude of advances attained in terminal computers, along with the introduction of mobile hand-held devices, and the deployment of high speed networks have led to a recent surge of interest in Quality of Service (QoS) for video applications. The main difficulty is that mobile devices experience disparate channel conditions, which results in different rates and patterns of packet loss. One way of making more efficient use of network resources in video services over wireless channels with heterogeneous characteristics to heterogeneous types of mobile device is to use a scalable video coding (SVC). An SVC divides a video stream into a base layer and a single or multiple enhancement layers. We have to ensure that the base layer of the video stream is successfully received and decoded by the subscribers, because it provides the basis for the subsequent decoding of the enhancement layer(s). At the same time, a system should be designed so that the enhancement layer(s) can be successfully decoded by as many users as possible, so that the average QoS is as high as possible. To accommodate these characteristics, we propose an efficient transmission scheme which incorporates SVC-aware dual-channel repetition to improve the perceived quality of services. We repeat the base-layer data over two channels, with different characteristics, to exploit transmission diversity. On the other hand, those channels are utilized to increase the data rate of enhancement layer data. This arrangement reduces service disruption under poor channel conditions by protecting the data that is more important to video decoding. Simulations show that our scheme safeguards the important packets and improves perceived video quality at a mobile device.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.1
• /
• pp.31-37
• /
• 2007

A $^{192}Ir$ small-focal source has been developed by using the HANARO reactor and the radioisotope production facility at the Korea Atomic Energy Research Institute (KAERI). The small-focal source with the dimension of 0.5 mm in diameter and 0.5 mm in length was fabricated as an aluminum-encapsulated form by a specially designed pressing equipment. For the estimation of the radioactivity, neutron self-shielding and ${\gamma}-ray$ self-absorption effects on the measured activity was considered. From this estimation, it is realized that $^{192}Ir$ small-focal sources over 3 Ci activities can be produced from the HANARO. Field performance tests were performed by using a conventional source and the developed source to take images of a computer CPU and a piece of a carbon steel. The small-focal source showed better penetration sensitivity and geometrical sharpness than the conventional source does. It is concluded from the tests that the focal dimension of this source is small enough to maximize geometrical sharpness in the image taking for the close proximity shots, pipeline crawler applications and contact radiography.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.4
• /
• pp.659-666
• /
• 2006

Servo-motors are used as key components of automated system by performing precise motion control as accurate positioning and accurate speed regulation in response to the commands from computers and sensors. Especially, the linear brushless servo-motors have numerous advantages over the rotary servo motors which have connection with the friction induced transfer mechanism such as ball screws, timing belts, rack/pinion. This paper proposes an estimation method of unknown motor system parameters using the informations from the sinusoidal driving type linear brushless DC motor dynamics and outputs. The estimated parameters can be used to tune the controller gain and a disturbance observer. In order to meet this purpose high performance Digital Signal Processor, TMS320F240, designed originally for implementation of a Field Oriented Control(FOC) technology is adopted as a controller of the liner BLDC servo motor. Having A/D converters, PWM generators, rich I/O port internally, this servo motor application specific DSP play an important role in servo motor controller. This linear BLDC servo motor system also contains IPM(Intelligent Power Module) driver and hail sensor type current sensor module, photocoupler module for isolation of gate signals and fault signals.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.7
• /
• pp.283-292
• /
• 2013

In order to ensure high performance, all the servers in an existing server cluster are always On regardless of number of real-time requests. They ensure QoS, but waste server power if some of them are idle. To save energy consumed by servers, the server power mode control was developed by shutdowning a server when a server is not needed. There are two types of server power mode control depending on when a server is actually turned off if the server is selected to be off: static or dynamic. In a static mode, the server power is actually turned off after a fixed time delay from the time of the server selection. In a dynamic mode, server power is actually turned off if all the services served in the server are done. This corresponds to a turn off after a variable time delay. The static mdoe has disadvantages. It takes much time to find an optimal shutdown time manually through repeated experiments. In this paper, we propose a dynamic shutdown method to overcome the disadvantages of static shutdown. The proposed method allows to guarantee user QoS with good power-saving because it automatically approaches an optimal shutdown time. We performed experiments using 30 PCs cluster. Experimental results show that the proposed dynamic shutdown method is almost same as the best static shutdown in terms of power saving, but better than the best static shutdown in terms of QoS.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.2
• /
• pp.118-126
• /
• 2004

Grid is a new Information Technology (IT) concept of "super Internet" for high-performance computing: worldwide collections of high-end resources such as supercomputers, storage, advanced instruments and immerse environments. The Grid is expected to bring together geographically and organizationally dispersed computational resources, such as CPUs, storage systems, communication systems, real-time data sources and instruments, and human collaborators. The term "the Grid" was coined in the mid1990s to denote a proposed distributed computing infrastructure for advanced science and engineering. The term computational Grids refers to infrastructures aimed at allowing users to access and/or aggregate potentially large numbers of powerful and sophisticated resources. More formally, Grids are defined as infrastructure allowing flexible, secure, and coordinated resource sharing among dynamic collections of individuals, institutions and resources referred to as virtual Organizations. GRID is an emerging IT as a kind of next generation Internet technology which will fit very well with agrometeorological services in the future. I believe that it would contribute to the resource sharing in agrometeorology by providing super computing power, virtual storage, and efficient data exchanges, especially for developing countries that are suffering from the lack of resources for their agmet services at national level. Thus, the establishment of CAgM-GRID based on existing RADMINSII is proposed as a part of FWIS of WMO.part of FWIS of WMO.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.6
• /
• pp.759-769
• /
• 2015

Diode rectifiers are very popular in industry. However, they include large low-order harmonics in the input current and do not satisfy harmonic current content restrictions. To reduce the harmonics to the power system, several methods have been introduced. It is heavy and expensive solution to use passive filters as the solution for high power application. Another solution for the harmonic filter is utilization of active filter, but it is too expensive solution. Diode rectifiers with configurations using switching device have been introduced, but they are very complicated. The combined 12-pulse diode rectifier with the square auxiliary voltage supply has been introduced. It has the advantages that auxiliary circuit is simple and inexpensive compared to other strategies. The advanced auxiliary voltage supply in this thesis is presented as a new solution. When the square auxiliary voltage supply applied, the improvement of THD is 6~60[%] in whole load range. But when the advanced auxiliary voltage supply applied, it shows stable and excellent reduction effect of THD as 57~71[%]. Especially, for the case with 10[%] load factor, reduction effect of THD has little effect as 6[%] in the case of inserting a square auxiliary voltage supply. But when the proposed new solution applied, reduction effect has excellent effect as 71[%]. Theoretical analysis of the combined 12-pulse diode rectifier with the advanced auxiliary voltage supply is presented and control methods of the auxiliary supply is proposed. The reduction in the input current harmonics is verified by simulation using software PSIM.

• Journal of Digital Contents Society
• /
• v.17 no.1
• /
• pp.51-57
• /
• 2016

Distributed Computing attempts to harness a massive computing power using a great numbers of idle PCs resource distributed linked to the internet and processes a variety of applications parallel way such as bio, climate, cryptology, and astronomy. In this paper, we develop internet-distributed computing environment, so that we can analyze High Resolution Rainfall Prediction application in meteorological field. For analyze the rainfall forecast in Korea peninsula, we used QPM(Quantitative Precipitation Model) that is a mesoscale forecasting model. It needs to a lot of time to construct model which consisted of 27KM grid spacing, also the efficiency is degraded. On the other hand, based on this model it is easy to understand the distribution of rainfall calculated in accordance with the detailed topography of the area represented by a small terrain model reflecting the effects 3km radius of detail and terrain can improve the computational efficiency. The model is broken down into detailed area greater the required parallelism and increases the number of compute nodes that efficiency is increased linearly.. This model is distributed divided in two sub-grid distributed units of work to be done in the domain of $20{\times}20$ is networked computing resources.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04a
• /
• pp.193-195
• /
• 2001

현대 사회는 인터넷을 통하여 수많은 정보들을 신속히 얻을 수 있고 공유할 수 있지만, 아직까지 PSTN(Public Switched Telephone Network: 공중전화망)을 이용하는 팩스가 광범위하게 사용되고 있다. 그것은 팩스가 컴퓨터 환경이 주어지지 않는 상황에서도 정보의 교환이 가능하며, 현재 팩스의 기능을 대체할 수 있는 전자메일 못지 않게 상세한 정보를 24시간 주고 받아볼 수 있기 때문이다. 그러나, 공중전화망을 이용한 팩스 전송은 LAN 환경에서의 정보 전송보다 높은 전송 비용 및 느린 전송 속도록 인하여 LAN과 PSTN을 혼용하는 인터넷 팩스 시스템이 개발되었고, 현재 상용 서비스되고 있다. 그런데, 상용 서비스를 하고 있는 인터넷 팩스 업체들은 고가의 장비와 유지/보수비용에 따른 전송 비용을 책정함으로써 공중 전화망을 이용한 전송 비용의 부담을 완전히 해소해 주지는 못하고 있다. 본 논문에서는 상용 업체들의 팩스 시스템과 서비스 형태를 분석하고, 그에 따라 전송 비용을 좀 더 절감할 수 있게 하기 위한 분산 인터넷 팩스 시스템을 설계 및 구현하였다. 즉, 상용 업체에서 제공하는 인터넷 팩스 시스템의 전송 서비스 기능의 대부분을 포함하면서, 팩스 모뎀과 LAN 환경에 연결된 PC를 사용하여 인터넷 팩스 시스템을 구축하게 함으로써 하드웨어의 구입비 및 유지/보수비용을 최소화하였을 뿐만 아니라 지역마다 팩스 서버를 분산 배치하여 별도로 운영하게 함으로써 상용 인터넷 팩스 서비스 업체들이 단독 혹은 일부 분사-지사 형태로 전송 처리해 오던 방법을 완전히 지역별로 작업을 분배 처리할 수 있게 하였다.위를 점하였다.전송과 복원이 이루어질 것이다.하지 않은 경우 단어 인식률이 43.21%인 반면 표제어간 음운변화 현상을 반영한 1-Best 사전의 경우 48.99%, Multi 사전의 경우 50.19%로 인식률이 5~6%정도 향상되었음을 볼 수 있었고, 수작업에 의한 표준발음사전의 단어 인식률 45.90% 보다도 약 3~4% 좋은 성능을 보였다.으로서 hemicellulose구조가 polyuronic acid의 형태인 것으로 사료된다. 추출획분의 구성단당은 여러 곡물연구의 보고와 유사하게 glucose, arabinose, xylose 함량이 대체로 높게 나타났다. 점미가 수가용성분에서 goucose대비 용출함량이 고르게 나타나는 경향을 보였고 흑미는 알칼리가용분에서 glucose가 상당량(0.68%) 포함되고 있음을 보여주었고 arabinose(0.68%), xylose(0.05%)도 다른 종류에 비해서 다량 함유한 것으로 나타났다. 흑미는 총식이섬유 함량이 높고 pectic substances, hemicellulose, uronic acid 함량이 높아서 콜레스테롤 저하 등의 효과가 기대되며 고섬유식품으로서 조리 특성 연구가 필요한 것으로 사료된다.리하였다. 얻어진 소견(所見)은 다음과 같았다. 1. 모년령(母年齡), 임신회수(姙娠回數), 임신기간(姙娠其間), 출산시체중등(出産時體重等)의 제요인(諸要因)은 주산기사망(周産基死亡)에 대(對)하여 통계적(統計的)으로 유의(有意)한 영향을 미치고 있어 $25{\sim}29$세(歲)의 연령군에서, 2번째 임신과 2번째의 출산에서 그리고 만삭의 임신 기간에, 출산시

• Journal of Broadcast Engineering
• /
• v.15 no.1
• /
• pp.122-132
• /
• 2010

AT-DMB system has been developed to increase data rate up to double of conventional T-DMB in the same bandwidth while maintaining backward compatibility. The AT-DMB system adopted hierarchical modulation which adds BPSK or QPSK signal as enhancement layer to existing DQPSK signal. The enhancement layer signal should be small enough to maintain backward compatibility and to minimize the coverage loss of conventional T-DMB service coverage. But this causes the enhancement layer signal of AT-DMB susceptible to fading effect in transmission channel. A turbo code which has improved error correction capability than convolutional code, is applied to the enhancement layer signal of the AT-DMB system for compensating channel distortion. However there is a need for other solutions for better reception of AT-DMB signal in receiver side without increasing transmitting power. In this paper, we propose adaptive array antenna system with Eigen-space beamforming algorithm which benefits beamforming gain along with diversity gain. We analyzed the reception performances of AT-DMB system in indoor and mobile environments when this new smart antenna system and algorithm is introduced. The computer simulation results are presented along with analysis comments.

• Composites Research
• /
• v.34 no.1
• /
• pp.8-15
• /
• 2021

In the shipbuilding and marine industry, as a technology for reducing the weight of parts to reduce energy and improve operational efficiency of ships is required, a method of applying fibers-reinforced composites which is high-strength lightweight materials, as part materials can be considered. In this study, the possibility of applying fibers-reinforced composites to the pipe support clamps was evaluated to reduce the weight of LNGC. The fibers-reinforced composites were manufactured using carbon fibers and glass fibers as reinforcing fibers. Through the computer simulation program, the properties of the reinforcing materials and the matrix materials of the composites were inversely calculated, and the performance prediction was performed according to the change in the properties of each fiber lamination pattern. In addition, the structural analysis of the clamps according to the thickness of the composites was performed through the finite element analysis program. As a result of the study, it was confirmed that attention is needed in selecting the thickness when applying the fibers-reinforced composites of the clamp for weight reduction. It is considered that it will be easy to change the shape of the structure and change the structure for weight reduction in future supplementary design.