• YAKHAK HOEJI
• /
• v.29 no.5
• /
• pp.291-301
• /
• 1985

주사제의 고무마개는 의약품과 직접 접촉하므로 보통 주사제의 용기로 규정되고 있다. 이러한 주사제용 고무마개의 필요조건과, 앞으로의 전망, 문제점에 관하여 검토해 보기로 한다.

• YAKHAK HOEJI
• /
• v.29 no.5
• /
• pp.330-339
• /
• 1985

주사제에 쓰이는 용기는 용기의 구성요소로 인정되는 고무마개 및 플라스틱 용기도 포함되지만 여기에서는 앰풀과 바이알에 국한하여 처리및 품질관리를 중심으로 설명하고자 한다.

• The Journal of Engineering Geology
• /
• v.18 no.3
• /
• pp.331-338
• /
• 2008

A new ground water sampler was developed and evaluated for target depth sampling under most rigorous field conditions. This new concept sampler comprises an air-cylinder, a hypodermic needle and a sampling bottle. Pressurized air or nitrogen gas can be used as a mechanical power source to operate the sampler. The air-cylinder is used to jab the hypodermic needle into the rubber cap of the sampling bottle. The hypodermic needle functions as a pathway to inject groundwater into the sampling bottle. Field test was conducted in a seawater intrusion monitoring well located at Handong district of Jeju Island. Water qualities in this well are periodically changed from the effects of sea water. Water sampling fir the same target depth in this well were tried at various times, and variations in electrical conductivity and pressure at the inside and outside of the sampler were measured using CTD divers. We found that the device could collect water samples only when it was actuated, and the pattern and range of variations in electrical conductivities and pressures measured at the inside and outside of the sampler were nearly identical. These results indicate that water samples using the sampler presented in this study represent correctly water qualities in which the samplings were made at a specific target depth in a well.

• Journal of the Korean Society of Radiology
• /
• v.12 no.6
• /
• pp.777-783
• /
• 2018

The purpose of this study was to investigate the degree of tearing of the rubber when the spike of the syringe connector was connected to the bottle of the contrast medium composed of the rubber compound type and to investigate the presence of the synthetic rubber due to tearing and grinding and the size of the pulverized product when the pulverized matters rubber was detected. As a result, in the case of tearing degree, the front side of the first contact with the end of the syringe connector was torn more than the back side by about $3.14{\pm}0.04mm$, and the pulverized matters was detected on average 7 to 15 on the 10 contrast mediums. The average particle size was measured to be about $7.89{\pm}0.31{\mu}m$. In addition, it is necessary to develop a micro_filter type automatic injection system for blocking off the pulverized matters as well as additional experiments through various experiments and analysis methods, and it is considered that interest of related organizations will be needed in preparation of fatal accidents when pulverized matters is introduced.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.401-406
• /
• 2002

식물조직 배양공정의 기계화 기술개발을 위한 기초자료를 얻고자 식물조직 배양기술의 개발 또는 식물묘를 대량생산하는 연구지도기관 및 농원 등의 배양실 10개소를 대상으로 배지의 분주, 배양용기의 밀봉 및 세척, 배양체의 접종공정 등에 대한 작업실태를 조사분석한 결과를 요약하면 다음과 같다. 가. 배양기술의 개발 또는 식물묘 대량생산은 대부분이 나리, 호접란, 풍란, 심비디움 등 화훼류였으며, 배지는 모두 한천이 혼합된 고체배지, 배양용기는 형상 및 용량 등이 다른 플라스크, 배양병, pE용기 등이 사용되었다. 나. 배지의 분주작업은 조사대상 10개배양실중 6개소는 작업자가 비이커를 사용하여 분주하였고 4개소는 자동 또는 반자동분주기를 사용하였으며, 인력 및 반자동분주기의 사용시 배양용기간의 분주량은 기준량의 $\pm$25%범위에서 차이가 있었다. 다. 액체배지의 분주시 온도는 36.8~88.$0^{\circ}C$, 점도는 3.7~11.8cP 범위였고 점도는 배지에 혼합하는 한천, 사과 등 유기물의 량에 따라 차이가 있으므로 배지의 분주작업을 기계화하기 위해서는 배지의 온도와 점도, 배양용기와 분주량 등을 종합적으로 고려하여 배지의 점도에 따라 분주량을 조절할 수 있도록 개발할 필요성이 있다고 생각된다. 라. 배양용기의 밀봉소재는 플라스크의 경우 호일 또는 고무마개와 호일, 배양병은 모두 나사산이 있는 캡, PE용기는 뚜껑을 사용하였으며, 밀봉작업은 모든 배양실에서 인력에 의존하였고 작업능률은 호일만으로 밀봉하는 경우 시간당 180~240병, 캡은 시간당470~600개 정도였다. 마. 배양체의 접종작업은 모든 배양실이 인력에 의존하였으며, 배양체를 배지와 분리하여 불필요한 부분을 제거하고 배양작물에 따라 생육정도를 2~3등급으로 구분하여 배양용기의 배지 위에 치상하는 과정으로 수행되었으며, 작업능률은 호접란의 경우 배양병에 25본을 접종하는데 시간당 6병, 심비디움은 원형 플라스크에 25본을 접종하는데 시간당 10병 정도였다. 바. 식물체의 대량증식에 사용되는 플라스크, 배양병, PE용기 등 배양용기의 세척작업은 농원의 1개배양실에서 간이식 세척기, 이 외의 9개배양실은 모두 물에 담겨 두었다가 세제와 브러쉬 등을 사용하여 인력으로 세척하고 있어 생력화 기술개발이 요구되었다.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.459-468
• /
• 2019

Purpose: The cavity exploration of the lower part of the road is carried out to prevent ground-sinking. However, the detected communities cannot be identified by the cavity location and history information, such as repackaging the pavement. Therefore, the field applicability of RFID systems was evaluated in this study to enable anyone to accurately identify information. Method: During temporary recovery, tag recognition distance and recognition rate were measured according to underground burial materials and telecommunication tubes using RFID systems with electronic tag chips attached to the bottom of the rubber cap. Result: The perceived distance and perceived rate of depth for each position of the electron tag did not significantly affect the depth up to 15cm, but it did have some effect if the depth was 20cm. In addition, water effects from nearby underground facilities and rainfall are relatively small, and the effects of wind will need to be considered during the weather conditions of the road. Conclusion: The RFID tags for field application of the pavement management system store various information such as location and size of cavity, identification date, cause of occurrence, and surrounding underground facilities to maximize cavity management effect with a system that can be computerized and mobile utilization.

• Korean Chemical Engineering Research
• /
• v.51 no.2
• /
• pp.250-256
• /
• 2013

Gasoline generates organic acid and polymer (gum) by hydrocarbon oxidation depending on the storage environment such as temperature and exposure to sunlight, which can cause metal corrosion, rubber and resin degradation and vehicle malfunction caused by accumulation in fuel supply system. The gasoline which has not been used for a long time in bi-fuel (LPG-Gasoline) vehicle causes problems, and low octane number gasoline have evaporated into the field, but the exact cause has not been studied yet. In this study, we suggest a plan of quality management by investigating the gasoline oxidation behavior. In order to investigate the oxidation behavior of gasoline, changes of gasoline properties were analyzed at various storage conditions such as storage time, storage vessel type (vehicle fuel tank, PE vessel and Fe vessel) and storage circumstances (sunlight exposure and open system, etc.). Currently distributing gasoline and bioethanol blended fuel (blended 10%) were stored for 18 weeks in summer season. The sample stored in PE vessel was out of quality standard (octane number, vapor pressure, etc.) due to the evaporation of the high octane number and low boiling point components through the vessel cap and surface. Especially, the sunlight exposure sample stored in PE vessel showed rapid decrease of vapor pressure and increase of gum. Bioethanol blended fuel showed similar results as gasoline.