• Title/Summary/Keyword: 고도 계획

Search Result 1,513, Processing Time 0.029 seconds

기존 도시의 U-City 구축 필요성 및 고도화 방안

  • Han, Seon-Hui;Im, Yong-Min;Lee, Jae-Yong
    • Information and Communications Magazine
    • /
    • v.31 no.8
    • /
    • pp.3-9
    • /
    • 2014
  • '08.3월 U-City법이 제정되었고, '09년에 U-City법에 근거한 제1차 유비쿼터스도시종합계획 (이하 U-City종합계획)이 수립되었다. 이후 계획에 따라 U-City R&D, U-City시범도시 지원사업 등이 추진되었으며, 기술, 서비스, 인력양성, 산업지원, 법제도 개선 등 다양한 부문에 U-City 지원 정책이 시행되었다. 이로 인해 국내 U-City 사업이 활발히 추진되었으나 주로 공공 주도의 신도시를 중심으로 구축되어 과도한 건설비용 및 관리운영비 부담, 중복투자 등의 다양한 문제를 발생하게 된다. 결국 신도시 조성 개발이익을 통한 U-City 구축은 건설경기의 침체와 함께 심각한 위기를 맞게 된다. 하지만 새정부 출범 이후 U-City는 창조경제 대표사업으로 채택되어 재도약할 수 있는 계기가 마련되었고 정부는 지역경제 활성화의 일환으로 도시재생사업에 U-City를 접목하는 등 U-City 부흥을 위한 시도를 지속적으로 하고 있다. 특히 신도시 개발로 치우쳐서 발생된 기존도시와의 불균형을 해소하기 위해 다각도로 해결방안을 모색하고 있다. 이에 현 시점에서는 기존도시에 초점을 맞추어 U-City 방향을 살펴보는 연구가 필요하며, 기존 신도시형 U-City가 추구했던 정보통신 위주의 계획에서 벗어나 지역특성 및 수준 등을 고려한 도시계획적 측면으로 접근하는 것이 바람직하다. 본고에서는 국내외 스마트시티 동향을 파악하고 우리나라의 신도시개발형 U-City 구축 현황의 문제점을 진단하여 기존도시형 U-City 구축의 필요성을 도출하였다. 이를 토대로 실효성 있는 기존도시 U-City 구현을 위하여 도시계획적 관점에서의 고도화 방안을 모색하고자 한다.

A Comparison and Analysis of the Levee Height Determination Methods in Korea and the USA (우리나라와 미국의 제방고 산정 기법에 대한 비교 분석)

  • Kang, Tae-Uk;Lee, Sang-Ho;Yu, Kwon-Kyu
    • Journal of Korea Water Resources Association
    • /
    • v.44 no.6
    • /
    • pp.497-510
    • /
    • 2011
  • A levee height is determined by adding a deterministic freeboard to a flood water level in Korea. In the USA, a levee height is determined by choosing a value conditionally among the freeboard criteria and the levels resulted from a probabilistic method. The probabilistic method adopts a conditional non-exceedance probability (CNP) which is the probability that the target stage will not be exceeded given a specific flood event. The purpose of the study is to compare Korean criterion for levee height estimation with that of the USA. Levee heights were determined according to the above two criteria at twenty-five cross sections in five streams. The results show that Korean criterion on average yields levee heights 20 cm higher than those calculated by the criterion of the USA. The larger the flood discharges become, the higher the levee height differences are usually. It is caused by the freeboard estimation criterion of Korea that the larger design flood is, the higher freeboard is given. Korean criterion, however, resulted in lower levee heights for smaller streams than those by the criterion of the USA. To sum it up, the Korean levee height criteria can result in overestimation or underestimation depending on flood discharge amount, being compared with the criteria of the USA. The Korean freeboard especially needs to be increased for smaller flood discharges.

Evaluation of DEM Accuracy from ASTER Data (ASTER 데이터에 의해 추출한 DEM 의 정확도 평가)

  • Na, Sang-Il;Park, Jong-Hwa;Shin, Hyoung-Sub
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2008.05a
    • /
    • pp.2028-2032
    • /
    • 2008
  • DEM은 도시계획, 도로건설 계획, 수해지역 예측 등의 많은 분야에서 다양하게 활용되고 있다. 특히 홍수와 같은 하천재해를 분석, 관리하기 위한 유출모형 적용 때 중요한 입력 자료로 사용되고 있다. 그러나 현재 우리나라에서 사용되는 DEM 제작방법은 과정이 복잡하고 자료 전환이 불가피하며 적용범위에 있어서도 제약이 따른다. 따라서 기존에 사용되던 방법들의 한계를 극복할 수 있는 정확한 DEM 생성 방법으로 위성영상을 이용하는 연구 및 기술개발이 진행되어 왔다. 본 연구에서는 현재 널리 사용되고 있는 DEM 생성 알고리즘을 ASTER 위성 영상에 적용하여 추출한 DEM의 정확도를 평가하고자 하였다. 정확도 평가는 USGS DEM을 사용하였으며, 그 결과 정사보정의 RMSE는 6개의 GCP에서 2 화소에 수렴하였고, 구름영역에서 고도값이 실제 지형보다 높게 나타났다. 또한, 금강 유역의 북동쪽으로 발달된 능선의 고도값은 ASTER DEM이 USGS DEM에 비해 과소평가 되었지만 영상 왼쪽에 위치한 분지는 평활한 지역으로 ASTER DEM과 USGS EM과의 차이가 거의 없는 것으로 나타났다. 또한, 산림 지역 등 능선의 고도값은 ASTER DEM이 USGS DEM에 비해 과소평가 되었지만, 분지 등 평탄 지역의 DEM은 차이가 거의 없는 것으로 나타났다.

  • PDF

Box-Wilson Experimental Design-based Optimal Design Method of High Strength Self Compacting Concrete (Box-willson 실험계획법 기반 고강도 자기충전형 콘크리트의 최적설계방법)

  • Do, Jeong-Yun;Kim, Doo-Kie
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.19 no.5
    • /
    • pp.92-103
    • /
    • 2015
  • Box-Wilson experimental design method, known as central composite design, is the design of any information-gathering exercises where variation is present. This method was devised to gather as much data as possible in spite of the low design cost. This method was employed to model the effect of mixing factors on several performances of 60 MPa high strength self compacting concrete and to numerically calculate the optimal mix proportion. The nonlinear relations between factors and responses of HSSCC were approximated in the form of second order polynomial equation. In order to characterize five performances like compressive strength, passing ability, segregation resistance, manufacturing cost and density depending on five factors like water-binder ratio, cement content, fine aggregate percentage, fly ash content and superplasticizer content, the experiments were made at the total 52 experimental points composed of 32 factorial points, 10 axial points and 10 center points. The study results showed that Box-Wilson experimental design was really effective in designing the experiments and analyzing the relation between factor and response.

다목적실용위성 3호 초기 궤도조정 결과 분석

  • Jeong, Ok-Cheol;Kim, Dong-Gyu;Jeong, Dae-Won;Kim, Hak-Jeong
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.37 no.2
    • /
    • pp.163.2-163.2
    • /
    • 2012
  • 다목적실용위성 3호는 2012년 5월 발사되어, 위성 기능점검을 위한 시험을 성공적으로 완료하였다. 위성이 발사체로부터 분리된 이후 임무궤도(고도 685km, 승교점 지방시 13시 30분을 갖는 태양동기궤도)를 획득하기 위해서는 궤도조정이 필요하다. 본 논문에서는 다목적실용위성 3호의 초기운영 기간 동안 수행한 총 10번의 궤도조정 계획 및 결과에 대해 기술하였다. 궤도조정 1 단계에서는 궤도조정 절차 및 기능을 점검하기 위해 6번의 시험 궤도조정을 순차적으로 수행하였고 이후 2 단계에서는 임무궤도 진입을 위해 4번의 궤도조정을 실시하였다. 궤도조정을 위해서는 원하는 추력분사 방향을 맞추기 위해 롤 방향 또는 피치 방향의 자세제어가 필요한데, 추력기를 사용하여 자세를 기동하는 모드(Del-V Mode)와 휠을 사용하여 자세를 기동하는 모드(Fine Del-V Mode)로 구분된다. 시험 궤도조정에서는 우선적으로 두 가지 모드에 대한 모드전환 시험을 실시하여 위성체 및 지상국 운영절차에 대한 이상 유무를 점검하였고, 이후 추력기 분사량을 10초로 설정하여 예측 대비 실제 궤도변경 결과값을 확인하였다. 시험 궤도조정의 결과를 토대로 본 궤도조정에서는 임무궤도를 획득하기 위한 경사각 조정 및 고도 조정을 수행하였다. 경사각 조정 시에는 승교점 지방시의 변화량을 줄이고, 이후 자연 교란력에 의한 궤도변화를 고려하여 목표궤도를 계획하였다. 또한, 고도 조정 단계에서는 연료 사용량 및 이심률 변화를 최소화 할 수 있도록 전형적인 호만 궤도천이 방식을 적용하였다. 궤도조정 결과 당초 목표한 값을 정확하게 달성하였고, 궤도조정 이후 궤도변화도 장기간 동안 임무궤도 범위를 유지함을 확인할 수 있었다.

  • PDF