• Journal of Advanced Navigation Technology
• /
• v.28 no.2
• /
• pp.172-177
• /
• 2024

This paper presents a method to overcome the problem of increasing elevation estimation error when estimating elevation in a multipath situation with radar. A multipath situation means that radar reception signals reflected from the same target come from multiple paths. In non-multipath, the monopulse method is accurate. For the opposite case, the least square error method is accurate. In multipath situation and when the elevation angle is very low, a singular occurs where the least square error estimate diverges. This singular was identified based on the propagation factor, and monopulse and least square error estimation methods were selectively used. As a result, we succeeded in increasing the accuracy of elevation estimation. MATLAB simulations were performed to verify the method proposed in this paper.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.8
• /
• pp.129-135
• /
• 2011

In this paper, we propose a multi target's elevation angle estimation method using multi beam forming technique. This method make a stacked beam to digital processing a received signal in array element. There can be desired receiving beam to application weight value at antenna element in beam forming. Currently, we are to make multi stacked beam using fast fourier transform in stead of phase shifter to be a computer performance much improvement. Also, we improve multi beam directivity using beam steering error correction technique in order to beam steering to desired direction in receiver. Through simulation, we show that the proposed elevation estimation method based on fast fourier transform and beam steering error correction technique, improves th performance of target estimation compared to previous method.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.3
• /
• pp.214-220
• /
• 2004

A computationally efficient algorithm is presented for 3-D near-field source localization using a uniform circular away (UCA). Algebraic relations are demonstrated between the incident angles (elevation angle and azimuth angle) under the far-field assumption and the actual near-field location (range. elevation angle, and azimuth angle). Using these relations as paths to follow to the peak of the 3-D MUSIC spectrum, the proposed algorithm replaces the 3-D search required in the conventional 3-D MUSIC with a 1-D path following after a 2-D initialization. thereby reducing the computational burden.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.437-442
• /
• 2018

In this paper, we propose a method for estimating the position of a source in a closed form when a single source has coherently distributed property against a circular array. When a sound source reaches a sensor through multipath environments, it is seen as a distributed source and can be represented by four variables: the nominal azimuth, nominal elevation, azimuth angular spread, elevation angular spread. Therefore, it requires a lot of computation by a search method such as DSPE (Distributed Source Parameter Estimator). In this paper, we propose a method of estimating the nominal azimuth and elevation angle in a closed form using correlation function and least squares method for fast position estimation. In particular, if the source is assumed as Gaussian distribution model, the standard deviation is also estimated in a closed form. In the simulation, the validity of the proposed method is confirmed by comparing with the DSPE.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.228-231
• /
• 1999

3차원 공간상의 표적의 위치는 방위각, 고각, 거리의 세가지요소로 나타내어 질 수 있다. 이 논문에서는 등각적 선배열 센서로 이루어진 3개의 부분센서배열을 이용한 3차원 표적의 위치추정 알고리듬을 제안하였다. 원거리 표적의 방위각 추정 알고리듬으로 근거리 표적의 방위각을 추정하면 추정된 방위각은 실제 근거리 표적의 방위각과 고각과 거리의 비선형 대수적 관계식으로 주어진다. 제안한 알고리듬은 3개의 부분센서배열에서 각각 표적을 원거리에 있다고 가정하고 원거리입체각을 추정하여 위의 대수적 관계식을 얻은 후 이들 관계식을 연립하여 실제 근거리 표적의 위치를 추정하였다. 다중표적의 경우 각각의 부분센서배열에서 추정한 원거리입체각이 어떤 표적에 대한 추정치인지 연관시켜주는 알고리듬이 필요하다. 이 논문에서는 추정한 원거리입체각의 모든 조합으로부터 3차원 MUSIC 스펙트럼값을 비교하여 그 중 표적의 개수만큼을 선별하여 다중표적의 위치를 추정하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.1
• /
• pp.61-66
• /
• 2000

In this paper, we are proposing an efficient 3D source localization algorithm using 3 uniform linear subarrays. The proposed algorithm replaces 3D search required in conventional 3D MUSIC algorithm with 3 1D searches, and thus reduces computational burden. The estimate of the 1D conic angle obtained from a subarray under the far-field assumption satisfies a nonlinear algebraic equation of the true source bearing angle, elevation angle, and range. The proposed algorithm estimates source location by solving 3 algebraic equations obtained from 3 subarrays. Comparing 3D MUSIC spectrums of the estimated source locations, the proposed algorithm solves pairing problem for multiple sources localization.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.1
• /
• pp.35-41
• /
• 2016

Based on correlation and least square method, a closed-form algorithm for estimating the location of mixed far-field and near-field source is presented using the Uniform Circular Array (UCA). Recently, for a homogeneous circular arrangement case, a correlation based closed-form algorithm is proposed to estimate 2-D angle (azimuth, elevation) and the extended algorithm is proposed to 3-D location (azimuth, elevation, range). These algorithms assume the far-field source or near-field source only. Therefore, for mixed source localization, the proposed algorithm estimates source location with the assumption of far-field source, and then estimates the range to distinguish the far-field from the near-field source. For both cases, numerical experiments have been performed, which confirmed the validity of the proposed algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.837-839
• /
• 2014

In radar systems, information of three-dimensional (3D) trajectory is necessary for tracking targets. The information of 3D trajectory for a 3D radar can be obtained by estimating the azimuth angle, the elevation angle, and the distance. The estimated information of the angles and the distance has errors according to received signals. Since these errors affect performances of 3D radar systems, performance analysis of 3D radar for the angles and the distance errors is required. In this paper, the performance of 3D radar systems is analyzed by root mean square error (RMSE) between true trajectory information and the estimated trajectory information according to the angles and the distance errors.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.143-148
• /
• 2013

This paper study about multi-beam for ditection of arrival estimation in wireless system. estimate a direction of arrival of target in multi input-output array antennas system. Beam steering method are divided by beam steering method of elevation angle or beam forming method, stack beam steering, frequency steering, phase steering radar and digital beam forming radar. Proposed algorithm is combined SVD method and antenna weight error compensation method with phase and amplitude compensation to effectivity beam steering. Through simulation, we were analysis of performance that general algorithm and proposed target estimation algorithm in this paper. It was proved to improved proposal algorithm than general algorithm in target direction of arrival estimation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.3
• /
• pp.410-413
• /
• 2012

This study describes the performance comparison to solve angle ambiguity needed to angle of arrival estimation in 2D radiometer. There are three algorithms to solve its ambiguity such as phase-comparison monopulse method, digital beam-forming method and least square error of the phase difference in 2D radar interferometer. To estimate two direction angles, phase-comparison monopulse method is sequentially applied to azimuth and elevation direction. To analyze the performance of these methods, probability of solving angle ambiguity and execution time have been chosen as performance indexes. Through the Monte Carlo simulation, we have verified that phase-comparison monopulse method is most effective in real-time signal processing application.