• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.51-57
• /
• 2020

WSN is a wirelessly configured network of sensor nodes with limited power such as batteries. If the sensor node's battery is exhausted, the node is no longer available. Therefore, if the network is to be used for a long time, energy consumption should be minimized. There are many Wireless Sensor Network Protocols to improve energy efficiency, including Cluster-based and chain-based Protocols. This paper seeks to examine the performance evaluation of routing protocols studied separately for the improvement of performance in wireless sensor network. The criteria for comparison were selected as the LEACH protocol, a representative hierarchical routing protocol, and the comparison targets considered CHEF and FLCFP and LEACH-DFL routing protocols with Fuzzy Logic. Various criteria for performance comparison were presented in this paper, and the performance was compared through simulation of each protocol. The purpose is to present a reference point for comparing the performance of other protocols through the performance comparison of CHEF, FLCFP, and LEACH-DFL, protocols with LEACH and Fuzzy Logic, and to provide additional design methods for improving the performance of protocols.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.139-145
• /
• 2015

This paper proposes to increase the node energy effienciecy, which rapidly drops during the transmission of LEACH (Low Energy Adaptive Clustering Hierachy), using the method of DL-LEACH (Dual-hop Layered LEACH). By introducing dual-hop method in the data transmission, the proposed single-hop method for short-range transmission and multi-hop transmission method between the cluster heads for remote transmission was introduce. By introducing a partial multi-hop method in the data transmission, a single-hop method for short range transmission method between the cluster heads for remote transmission was introduces. In the proposed DL-LEACH, the energy consumption of cluster head for remote transmission reduces and increases the energy efficiency of sensor node by reducing the transmission distance and simplifying the transmission routine for short-range transmission. As compared the general LEACH, it was adapted to a wider sensor field.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1284-1294
• /
• 2010

The ZigBee is one of the most important technologies for composing USN. It is one of the IEEE 802.15.4 standards to support personal area networks. It uses a hierarchical routing or an on-demand route discovery strategy as an address allocation method. A hierarchical routing doesn't use a routing table but only uses a child node or a parent node as an intermediate node for data delivery. Therefore, the ZigBee network's topology greatly affects the overall network performance. In this paper, we propose a more trustworthy algorithm than only using the depth and widely variable LQI during network formation, and moreover we propose an algorithm to measure network's trustworthiness. We simulate our algorithm using the NS-2 and implement our network using the MG2400 ZigBee module for verifying performance.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.313-314
• /
• 2007

현대 로봇 분야의 개발에 있어 지능형 서비스 로봇은 모듈 기반으로 구성될 수 있다. 여기서 모듈이란 로봇의 특정 태스크들 수행하기 위해 만들어진 자동화 하드웨어 단위를 의미한다. 이러한 모듈 기반의 로봇시스템 내부는 네트워크의 이종성에 따라 다양한 네트워크들을 통해 연결될 수 있기 때문에 다중 모듈간 안정적이고 효율적인 통신을 하기 위해서는 상호운영을 위한 기술이 뒷받침 되어야 한다. 이를 위해 본 논문은 모듈기반의 로봇을 위한 통신용 미들웨어를 제안한다. 제안된 미들웨어는 네트워크 인터페이스 계층과 네트워크 적응 계층으로 나누어진다. 네트워크 인터페이스 계층은 각 이종 인터페이스들을 논리적인 채널로 추상화하는 기능을 갖는다. 반면, 네트워크 적응 계층은 모듈간의 통신을 위한 메시지 형식을 정의하고 주소할당 및 이종 네트워크를 고려한 라우팅 기능들을 갖는다. 결국, 제안된 미들웨어는 두 계층을 통해 상위 로봇 어플리케이션 개발자들에게 네트워크의 투명성을 보장할 수 있으며 모듈 기반의 로봇내에서 모듈간의 안정적이고 효율적인 통신을 지원한다.

• Journal of Advanced Navigation Technology
• /
• v.13 no.4
• /
• pp.551-558
• /
• 2009

Most of clustering schemes focusing on the energy efficiency have only a cluster head in each cluster, thus the energy consumption of cluster head in a cluster can rapidly increase. To reduce the energy consumption, recently, the dual-layered clustering which is separated a cluster ranges into two parts, i.e., data aggregation layer and data transmission layer, based on a sensor equipped with geographical positioning system (GPS), was proposed. However, the logical regions existing within the dual-layered clustering range can not distinguish efficiently. This scheme leads to many messages collision and transmission delay among member nodes. In this paper, to solve these problems, we propose a separated dual-layered routing scheme using the position information and the cluster radius. Proposed scheme clearly distinguish the dual-layered clustering range and gets the balanced number of member nodes in each cluster. Therefore, the proposed routing scheme could prolong the overall network life time about 10% compared to the previous two layered clustering scheme and LEACH.

• Journal of KIISE:Information Networking
• /
• v.28 no.1
• /
• pp.173-181
• /
• 2001

최근 인터넷 사용자의 증가와 서비스의 다양화 그리고 이에 따른 고속 인터넷 엑세스 기술의 도입으로 인터넷 트래픽의 급격한 증가를 초래하고 있다. 이러한 이유로 인터넷 패킷 전달에 2계층 스위칭 기술과 3계층 라우팅 기술을 접목한 IP/ATM Hybrid system이 등장하게 되었다. 이러한 시스템에서의 중요한 자원은 2계층 스위칭 기술을 사용하기 위한 유한한 VCI/VPI 공간이다. 이 VCI/VPI 공간을 효과적으로 관리하기 위한 방안으로 많은 방안들이 제시되고 있다. 특히 흐름 기반의 IP/ATM Hybrid system에서의 흐름 분류기를 사용함으로서 VCI/CPI 공간을 관리하고 있다. 본 논문에서 주장하는 적응형X/Y 분류기가 유한한 VCI/VPI 공간을 효율적으로 관리하기 위한 방안임을 제시하고 이에 대하여 실험을 통하여 성능 평가를 실시하였다 특히 동일한 VCI/VPI 공간에서 X/Y분류기와의 비교실험에서 적응형 X/Y 분류기의 성능이 높은 스위칭 율로 나타나고 있다. 즉 적응형 X/Y 분류기가 X/Y분류기에 비하여 효율적으로 VCI/VPI를 관리함을 보이고 있다

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.288-288
• /
• 2006

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.2
• /
• pp.370-376
• /
• 2009

Recently, Study for routing protocol is gone vigorously in the Ubiquitous Sensor Network. A hierarchical routing protocol is being practical and received interest among them. Therefore we analyze a weak point of HEED. And I suggest the new protocol that solved a weak point of HEED. The new protocol that we propose puts weight in the energy remainder amount than HEED and elect CH. And elected CH is designed to change by new node when quantity of energy leftover becomes less than 50%. Therefore all nodes come to use energy fairly. The protocol that we proposed can prove the cluster survival rate about 30%. And CH is more effective because when elect CH replace, response time selects small node.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.225-234
• /
• 2012

In Wireless Sensor Networks (WSNs) where deployed sensors are not stationary, the most important demand of is to design a cost effective and reliable network. This paper proposes an energy aware network construction and routing scheme, which is based on the hierarchical approach to distribute the task in some sensors in order to prolong the network lifetime. It aims to make even the energy consumption on constitute nodes. With the node hierarchy, the sink initiates the construction by electing gateway nodes in the network and the elected gateway nodes participate to form logical clusters by electing a cluster head in each cluster. Then, the cluster heads aggregate data from the sensing sensors and transmit the data to the sink through the gateway. Our simulation result illustrates that the proposed scheme provides a basement to reduce the source of energy dissipation in network construction, and as well as in data routing.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.820-823
• /
• 2011

WSN is composed of a lot of small sensors with the limited hardware resources. In WSN, at the initial stage, sensor nodes are randomly deployed over the region of interest, and self-configure the clustered networks by grouping a bunch of sensor nodes and selecting a cluster header among them. In this paper, we propose a self-configuration routing protocol for WSN, which consists of step-wise ripple routing algorithm for initial deployment, effective joining of sensor nodes. RRA is search node in RF-coverage of each node, which result in fast network connection, reducing overall power consumption, and extending the lifetime of network.