• Composites Research
• /
• v.31 no.3
• /
• pp.88-93
• /
• 2018

In this study, damaged composite laminates were repaired by a stepped patch repair method using halloysite nanotube(HNT) and milled carbon(MC) reinforced composite materials with different amount of the particles. And the mechanical and structural effects of the particles on the interface between the damaged and repair surfaces were analyzed. At this time, after exposing them to a harsh environment of high temperature and humidity for a long time, the recovery rate of the material properties relative to the material forming the damaged plate was compared. As a result, at $70^{\circ}C$ high temperature distilled water, the hygroscopicity of the HNT/GFRP composites was significantly different from that of the MC/GFRP composites. Especially, 0.5, 1 wt. % HNT was added, the moisture absorption rate was the lowest and this was the factor that contributed to the mechanical strength increase. On the other hand, MC showed a high hygroscopic resistance only with a small amount, and the strength was different according to the action direction of the load, and the addition amount was also different.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.147-151
• /
• 1999

YBCO step-edge Josephson junction were fabricated on sapphire substrates. The steps were formed on R-plane sapphire substrates by using Ar ion milling with PR masks. The step angle was controlled in the wide range from 25$^{\circ}$ to 50$^{\circ}$ by adjusting both the Ar ion incident angle and the photoresist mask rotation angle relative to the incident Ar ion beam. CeO$_2$ buffer layer and in-situ YBa$_2Cu_3O_{7-{\delta}}$ (YBCO) thin films was deposited on the stepped R-plane sapphire substrates by pulsed laser deposition method. The YBCO film thickness was varied to obtain the ratio of film thickness to step height in the range from 0.5 to 1. The step edge junction exhibited RSJ-like behaviors with I$_cR_n$ product of 100 ${\sim}$ 300 ${\mu}$V, critical current density of 10$^3$ ${\sim}$ 10$^5$ A/ cm$^2$ at 77 K.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.223-228
• /
• 1999

We have investigated the microwave properties of a high-T$_c$. superconducting Josephson junction by Shapiro step measurements. A Josephson junction was fabricated on the bicrystal MgO substrate using pulsed laser deposition method. We have measured Shapiro steps in the I-V characteristics under the irradiation of 1.36 cm wavelength up to 45 K and found inclined current steps above 50 K. In order to understand these results, we introduced an additional resistance connected in series to RSJ model. Using this modified RSJ model, we could explain the inclined current steps as a result of superposition of the junction and an additional resistance above certain temperatures. Also, we presented the received power of the Josephson junction above 50 K.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.83-86
• /
• 1999

We have fabricated $_2Cu_3O_7$ step-edge junctions with different step orientations and studied their transition properties. Steps with different orientations were prepared on the substrate. Josephson junctions were made on a single substrate with step orientations ranging from 0$^{\circ}$ to 165$^{\circ}$ at 15$^{\circ}$ interval. We measured current-voltage characteristics, the critical current, and the superconducting transition temperature as a function of the angle. The critical current showed a modulation that has a maximum near 0$^{\circ}$ or 90$^{\circ}$ and a minimum near 45$^{\circ}$ and 135$^{\circ}$. We believe that the critical current modulation with the step orientation could be associated with the symmetry of high T$_c$ superconductor.

• Progress in Superconductivity
• /
• v.5 no.2
• /
• pp.94-97
• /
• 2004

Step-edge Josephson junctions (SEJ) have been fabricated on sapphire substrates with in situ deposited films of CeO$_2$ buffer layer and YBa$_2$Cu$_3$O$_{7}$ films on the low angle steps. Direct coupled SQUID magnetometers with the SEJ were formed on 1 cm X 1 cm R-plane sapphire substrates. Typical 5-${\mu}{\textrm}{m}$-wide Josephson junctions have R$_{N}$ of 3 Ω and I$_{c}$ of 50 $mutextrm{A}$ at 77 K. The direct coupled SQUID magnetometers were designed to have pickup coils of 50-${\mu}{\textrm}{m}$-wide 16 parallel loops on the 1 cm X 1 cm substrates with outer dimension of 8.8 mm X 8.8 mm. The SEJ SQUID magnetometers exhibit relatively low 1/f noise even with dc bias control, and could be stably controlled by flux-locked loops in the magnetically disturbed environment. Field noise of the do SQUID was measured to be 200∼300 fT/Hz$^{1}$2/in the white noise region and about 2 pT/Hz$^{1}$2/ at 1 Hz when measured with dc bias method.hod.d.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.92-92
• /
• 2009

조선업을 포함한 다양한 산업 분야에서 후판 강재의 수요량 증가와 함께 사용 범위 또한 폭넓게 되고 있다. 특히, 선박의 수송효율의 극대화를 위하여 컨테이너선의 대형화가 급속하게 진행되고 있으며, 2009년 현재1,300TEU 이상의 초대형 컨테이너선이 건조되고 이다. 이처럼 용접구조물의 초대형화에 따른 사용강재 또한 고강도 극후물화 되고 있다. 현재 선박에 적용중인 고강도 강재는 EH47 강재로 YP 460MPa 급의 강재가 Hatch Coamming부에 적용중에 있으며, 강재의 두께 또한 70mm 이상이다. 이러한 고강도 극후물재의 강구조물에 적용에 따른 선급협회에서는 용접부에서의 취성균열 전파에 의한 취성파괴의 위험성이 있으므로 강재의 두께를 제한하고 더욱 엄격한 파괴인성값을 요구하고 있다. 일본선급협회(NK)를 중심으로 취성균열의 정지를 위한 모재의 요구 성능등에 관한 연구들이 진행되고 있다. 이 연구의 대부분의 전제 조건은 선박의 블럭과 블럭의 조립시에 용접부가 직선형이 아닌 계단형(Butt shift)를 하는 것으로 하고 있으므로, 국내의 조선건조 공법의 현실과는 거리감이 있다. 본 연구에서는 국내 조선사에서 수행중인 직선 이음부에 대한 시공 공법에서 취성균열이 발생하여 진전 되더라도 균열을 정지 시킬 수 있는 기술에 관한 연구를 수행하였다. 균열의 진전은 대부부의 연속면에서는 정지를 시키지 못하고 직진 전파 하여서 파괴에 도달하게 된다. 따라서 뭔가의 불연속적인 면을 임의로 생성하여야 균열을 정지 시킬 수 있다. 본 연구에서는 이러한 균열의 정지 방법으로 형상적인 측면과 재료적인 측면에서 검토를 수행하였다. 형상적인 측면에서는 균열을 정지 시키고자 하는 위치에 불연속적인 면을 만들기 위하여 일정 크기의 hole을 만들어서 균열을 정지시켰으며, 재료적인 측면에서는 고인성의 용접재료를 사용하여서 취성균열이 진행하는 경로에 인성을 높은 재료를 적용하여 불연속적인 면의 생성과 함께 인성을 높여서 균열을 정지 시키는 기술을 개발하였다. 이러한 기술의 개발을 통하여 취성균열의 전파에 의한 파괴를 방지 할 수 있으며, 용접구조물의 안전성 확보를 가능하게 하였다.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.1
• /
• pp.28-37
• /
• 2011

In this study, the series-poem, Bihaedangsasippalyoung(48 poems for beautiful scene of Bihaedang), written by scholars of Jiphyonjeon for Bihaedang garden of Anpyung-Daegun(Prince Anpyung, 1416-1453), was analyzed focusing on scenery lexeme to interpret the meaning of scenery and gardening culture of Sadaebu(noblemen) during the first term of Chosun Dynasty. The study result is as followings. First, the subtitle of Sasippalyoung(48 poems) written by Anpyung-Daegun while he grew Bihaedang garden on the foot of Inwang Mountain showed repetitive nomativity comparing joining of yin and yang, such as life and form of animal and plan, time and space, meaning and symbolism, etc. Among scenery lexemes, 38 are represented plant and flowers, and 8 are represented gardening ornaments and animals. Second, the names of gardens were expressed as Wonrim, Jongje, Imchon(Trees and Ponds), or Hwawon(Flower garden), or also presented as Gongjeong(Empty garden), Manwon(Full garden), Jungjeong(Middle garden), Huwon(Backyard), Wonrak(Inner court), or Byulwon(Seperated garden) depending on density and location. In addition, there were pavilions and ponds, stepping stones and stairs, a pergola, a flat bench, flowerpots, an artificial hill, oddly shaped stones, wells, aviary, flower beds, or hedges. A gardener was called Sahwa(flower keeper), planting and gardening of garden trees were called Jaebae(cultivation), a pond island was called Boogoo(floating hill), and miniature landscapes were called Chukjee(reduced land). Third, willows were planted on the outdoor yard, and plum trees were planted in front of the library, which led to bamboo woods road. Peony, camellia, tree peony and crepe myrtle were planted on the inner court with mossy rocks, small artificial hills, glass rocks, flower pots. There were rectangular ponds, while breeding deer, dove, rooster, and cranes. Fourth, landscape elements were enjoyed as metaphysical symbolic landscape by anthropomorphism, such as (1) gentlemen and loyalty, (2) wealth and prosperity, (3) Taoist hermit and poetical life, (4) reclusion and seclusion, (5) filial piety, virtue, introspection, etc. In other words, the garden presented a variety of gardening culture appreciating meaningful landscape, such as investigation of things, reclusion and seclusion, and building orientation of a fairyland yearning eternal youth and Mureungdowon(Taoist Arcadia) by making a garden blending beautiful flowers and trees, with precious birds and animals. Fifth, there were many landscape appreciation schemes, such as Angkyung(looking-up), Bukyung(looking-down), Jeokyung(looking-under), Chakyung(bringing outer space into inside), Yookyung(flower viewing), Yojeong(walking around the garden enjoying flowers), Hwasaekhyangbyuk(flower gardening), and Garden appreciation enjoying landscape through time and seasons with different inspirations.