• Journal of the Korean Arthroscopy Society
• /
• v.13 no.3
• /
• pp.212-219
• /
• 2009

Medially retracted large-sized rotator cuff tears includes large-sized tears, massive tears and irreparable tears. Generally arthroscopic repair or open repair of rotator cuff tears is used in reparable tears. However, arthroscopic repair requires long period practice and endurance. In irreparable tears, arthroscopic debridement, partial repair, latissimus dorsi transfer and retrograde arthroplasty can be the option. Arthoscopic debridement gives temporal relief who experienced improvement in pain and increase in range of motion after subacromial local anesthetic injection. Also arthroscopic partial repair gives good results in irreparable cases, especially in suprascapular nerve traction neurapraxia. Tendon transfer can be used in mild to moderate muscle weakness in shoulder abduction for long term treatment. Pectoralis major transfer can be used in anterosupeior tears and latissimus dorsi transfer can be used in posterosuperior tears. Reverse shoulder prosthesis is used in extreamly weakened shoulder pseudoparalysis. The authors discussed the method of arthroscopic repair in irreparable tears. The debridement, partial repair, and tendon transfer could be used in medially retracted large-sized rotator cuff tears.

• Journal of the Korean Arthroscopy Society
• /
• v.9 no.1
• /
• pp.70-76
• /
• 2005

Purpose: We describe a new technique of arthroscopic repair with using autogenous hamstring tendon graft augmentation for the acute posterior cruciate ligament rupture. Operative technique: A routine arthroscopic examination of the knee joint is initially performed, then the posterior trans-septal portal is prepared with the using the posteromedial and posterolateral portals. The torn tibial stump that is retracted to the posterior compartment is repaired by a suture hook that is introduced through the anteromedial portal; visualization during this procedure is done with the arthroscope via the posteromedial portal. Using the retrieved suture, both suture ends are brought out to the anteromedial portal. The torn tibial stump is pulled to the intercondylar notch and then repaired with stitches at the anterior compartment. After the tibial and femoral tunnels are prepared without damaging the remnant PCL bundle, the combined torn PCL fibers and the autogenous single-bundle semitendinosus and gracilis tendon grafts are passed through the femoral tunnel and fixed together Conclusion: Arthroscopic repair of the torn tibial stump and autogenous hamstring tendon graft augmentation after preparing the tibial and femoral tunnels by using the trans-septal portal, without damaging the remnant PCL bundle, seems to be a very effective method for the treatment for acute PCL injuries, and especially for tears at the femoral attachment.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.1
• /
• pp.77-81
• /
• 2009

In patients with full-thickness tears of the rotator cuff, the tendon is usually detached from its bony insertion in the greater or lesser tuberosity. We experienced an unusual pattern of rotator cuff tear in two cases, in which complete rotator cuff tears occurred at the tendinous portion (i.e., intrasubstance tears) with more than a 1cm remnant attached to the greater tuberosity. Arthroscopic tendon-totendon repair was performed without remnant removal in both cases. Follow-up MRI at 6 months showed re-tear of the rotator cuff at the previous tear site in both of our patients. To prove the availability of arthroscopic tendon-to-tendon repair in such cases, a larger case follw-up and biomechanical studies are required.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.3
• /
• pp.242-248
• /
• 2009

Purpose: To evaluate the clinical and radiologic results of the arthroscopic rotator cuff repair for partial articular surface tendon avulsion lesion. Materials and Methods: Twelve patients with symptomatic, partial articular surface tendon avulsion underwent arthroscopic rotator cuff repair between Mar. 2006 and Sep. 2008. The mean follow-up period was 18.3 months(12~36 months), and the mean age at the time of surgery was 46.9-year-old(19~64 years). Three cases had underwent rotator cuff repair after conversion to full-thickness tear and nine cases had transtendon repair with preserving bursal side cuff. Results: The mean VAS during motion was 6.2 before treatment and 2.0 at final follow-up (p<0.001). The passive forward flexion improved from $163.3^{\circ}$ preoperatively to $169.8^{\circ}$ postoperatively (p=0.038). The mean UCLA score improved from 18.4 preoperatively to 30.1 with 2 excellent, 8 good and 2 fair results at final follow-up. The mean KSS improved from 61.8 preoperatively to 76.8 at final follow-up. By examining the postoperative MR images of 5 patients, complete healing was observed in all of them. Conclusion: Arthroscopic rotator cuff repair may be an effective procedure for partial articular surface tendon avulsion in pain relief and improvement of the range of motion. If the remaining bursal side cuff fibers are intact, transtendon repair procedure with preserving the intact bursal layer of the tendon can be considered. If the remaining bursal side cuff fibers are friable or little, completion from partial-thickness to full-thickness tears with subsequent cuff repair can be considered.

• Journal of the Korean Arthroscopy Society
• /
• v.14 no.1
• /
• pp.1-6
• /
• 2010

This study was undertaken to document the clinical results and technical aspects of arthroscopic repair including popliteus tendon as a post for the treatment of complex lateral meniscus in young people indicated as total meniscectomy. From June 2004 to May 2006, we prospectively studied arthroscopic repairs on 32 young people knees with symptomatic complex lateral meniscus that was treated by all inside repair technique using Popliteus tendon as a post. Clinical results were evaluated using Lysholm knee scores preoperatively and at final follow-up. 2nd look arthroscopy or MRI was taken at final follow-up. 80% of patients carried out MRI or 2nd look arthroscopy under permission. Most patients who follow up were able to return to their previous life activities with little or no limitation, and no reoperation was required after an average follow-up of 42.8 months. Mean Lysholm knee scores improved from 65.4 (range, 55 to 75) preoperatively to 93.9 (range, 79 to 100) at the final follow-up (P<.001). 80% meniscus healing was found on arthroscopic or MRI follow up. Conclusively, arthroscopic repair using Popliteus tendon as a post is effective for treating young people with complex lateral meniscus tear as a salvage procedure.

• Clinics in Shoulder and Elbow
• /
• v.11 no.2
• /
• pp.112-117
• /
• 2008

Purpose: This study prospectively evaluated the outcome of arthroscopic transtendinous repair as a treatment for partial articular side tears of the rotator cuff. Materials and Methods: Fifteen patients with symptomatic, partial articular side tears of the rotator cuff underwent modified transtendinous repair. The patient's mean age was 52.5 years and the mean duration of symptoms was 33.7 weeks. The visual analogue scale (VAS), the ASES score, the active ROM of the shoulder and the patient's satisfaction were evaluated both preoperatively and postoperatively. The clinical results were analyzed using the Wilcoxon's signed rank test. Results: The mean VAS was $6.6\pm1.1$ before treatment and $0.4\pm0.6$ at 6 month, and the ASES scores for all the patients were significantly better over the six-month period of follow-up (p<0.05). The mean active ROM in abduction was $94.3\pm22.3$ before treatment, $108.7\pm16.3$ at 1 month (p=0.0041) and $164.3\pm5.3$ at six months (p=0.0006). In flexion, it was $105.0\pm23.8$ before treatment, $119.0\pm17.4$ at 1 month(p=0.0075) and $174.3\pm5.3$ at six months (p=0.0006). At the final follow-up, 94% of patients were satisfied or very satisfied after operation. Conclusion: We experienced satisfactory clinical results after a short-term follow-up of arthroscopic transtendinous repair, and we believed this to be an effective procedure for patients with partial articular side tears of the rotator cuff.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.2
• /
• pp.119-125
• /
• 2009

The primary purposes of revision repair for a failed rotator cuff repair are a relief of pain and functional improvement. Therefore, revision repair is most proper in patients with the functional deficit accompanied with the shoulder weakness as well as the persistent pain. The important factor that is considered in revision repair is a quality of torn cuff. Especially, Care must be taken to ensure that the revision repair is possible, considering the size of tendon defect, atrophy of the muscle, fatty infiltration and extent of the retraction of tendon. Revision repair of a failed rotator cuff repair is more difficult, and the functional results are less satisfactory than those of primary repair, because excessive bursal scarring and tendon retraction may be exhibited, a large or massive tear is often detected, tear has usually been present for a long time, and a quality of muscle-tendon may be poor. So, we discuss our experiences related to revision repair after a failed cuff repair that has been recently introduced through the articles.

• Clinics in Shoulder and Elbow
• /
• v.13 no.1
• /
• pp.79-85
• /
• 2010

Purpose: To evaluate the results from arthroscopic repair versus debridement for full-thickness tears of the upper subscapularis tendon. Materials and Methods: Ninety-nine patient outcomes were evaluated and compared prospectively. Sixty-nine patients with full-thickness tears of the upper subscapularis tendon underwent arthroscopic repair (group I) and thirty patients underwent simple debridement (group II) between May 2003 and October 2007. In all patients, the tear was localized to the superior one third of the upper subscapularis tendon. The results of the treatment were assessed by evaluating the UCLA, ASES, and VAS for pain and internal rotation strength scores before and after the operation. Results: In groups I and II, UCLA, ASES, VAS, and internal rotation muscle power (perfect score = 5) scores were improved after surgery. In comparing group I and group II, the UCLA and VAS scores were not significantly different (p>0.05), while the ASES and internal rotation strength scores were significantly different (p<0.05). Conclusion: The arthroscopic repair of full-thickness tears of the upper subscapularis tendon was a better surgical method than simple debridement.

• Journal of the Korean Arthroscopy Society
• /
• v.14 no.1
• /
• pp.49-52
• /
• 2010

Purpose: We introduce arthroscopically assisted mini-open rotator cuff repair using anterolateral approach. Operative Technique: Placing lateral decubitus position on general anesthesia, a standard arthroscopic glenohumeral examination is performed to evaluate lesions of shoulder joint through posterior and anterior portal. And then arthroscope is placed in the subacromial space and we evaluate the size of the torn tendon and perform arthroscopic acromioplasty through lateral portal. A 3 to 4 cm skin incision is performed from anterolateral edge of acromion to distal and dissected along to raphe between anterior and middle deltoid. A deltoid retractor is then placed, allowing direct visualization of the rotator cuff and humeral head. As torn tendon is tagged by traction suture, we try to anatomical reduction on the footprint and then perform single row or double row repair of the rotator cuff using suture anchors. To prevent avulsion of the deltoid from the acromion, additional sutures by bone tunnel with acromion and deltoid is performed. Conclusion: This technique is useful procedure to get direct approach to anterior portion of supraspinatus tendon and to need lesser deltoid retraction than portal extension approach due to dividing along to raphe between anterior and middle deltoid. Also it provide better visualization of the superior portion of subscapularis and infraspinatus.

• Journal of the Korean Arthroscopy Society
• /
• v.8 no.2
• /
• pp.124-131
• /
• 2004

Purpose: To validate and introduce the technique of the arthroscopic repair for the treatment of the Subscapulris tendon tear. Materials and Methods: From April 2003 to April 2004, Arthroscopic repairs were performed in 8 patient with subscapularis tendon tear. The mean follow-up period was 11months. two cases involved only subscaplaris tendon tear. Four cases were associated small sized posterosuperir. rotator cuff tear and two cases were in large size. The type of subscapularis tendon showed upper portion full-thickness tear in 6 cases, partial-thickness tear localized at articular surface in 1 case, complete tear in 1 case. The results were analyzed by using subjective satisfaction, inferior movenent of superior displaced humeral head, Constant-Murley functional scoring Results: Constant-Murley scoring was improved from 55 point preoperatively to 75 point postoperatively following 11 months. Mean score was 71 point except 2 cases of large superoposterior rotator cuff tear, Most humeral heads were distaracted postoperatively. The subjective result for the 8 shoulders were very satisfying in 5 cases, satisfying in 1 case and dissatisfying in 2 cases. Therefore satisfactory results were noted in 6 cases (75%) of this overall treatment group. Conclusion: The arthroscopic repair for the subscapularis tendon tear is thought to be available method, which could reduce severe complications following the weakness of deltoid muscle and postoperative pain. Especially Partial Subscapularis tear not associated with superoposterior rotator cuff tear including PASTA lesion was the sutable indication of the Arthroscopic repair.