• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.25-30
• /
• 1992

최근 전자계산기를 이용한 진동해석 방법이 눈부시게 발달하여, 일반 구조물 이나 기계 구조물 등의 동특성을 설계 단계에서 정도 높게 예측하는 것이 가능하게 되었다. 그러나 종래의 구조해석은 주어진 시스템의 동특성을 위한 것으로 얻어진 동특성으로부터 질량, 관성제원 및 스프링상수값 등의 설계상 수값을 규명하는 연구는 미미한 실정이다. 이것에 대한 해결방법으로 크게 해석적인 방법과 실험적인 방법으로의 접근이 있어 왔다. 해석적인 방법으로 유한요소해석에서 얻은 모드좌표를 물리좌표로 변환하는 방법으로 Guyan의 정축소와 같은 절점축소를 행하는 방법이 고찰되었다. 실험적인 방법으로 가 진실험에서 얻은 전달함수나 모드파라미터로부터 [M], [K] 행렬을 결정하는 연구가 있었지만 어떤것도 질량, 스프링상수 등의 설계상수를 완전히 규명하 지는 못하였다. 또한, 설계 단계에서 필요한 질량, 관성제원 또는 스프링상수 등의 최적한 값이나, 원하는 시스템특성을 얻을 수 있는 설계상수의 적정한 폭을 구하는 연구는 설계자의 경험과 반복된 시행착오에 의존하는 실정이다. 감도해석은 이러한 문제점을 개선하는 수단으로 설계변수에 대한 동특성의 변화율을 구하는 것이다. 감도해석을 수행하는 것은 어느 설계변수를 수정하 는 것이 주어진 동특성에 부합되는 지를 알려주고, 어느 것을 수정하는 것이 원하는 방향의 동특성변화에 가장 효과적인지를 알려주는 것이다. 따라서 감 도해석을 이용하여 설계의 최적화 프로그램을 만들수 있고, 이것은 설계자가 요구하는 동특성을 목적함수로 하여 주어진 구조물을 최적화하는 설계상수 값을 얻을 수 있게 한다. 본 논문에서는 강체모델의 동특성으로부터 모델의 설계 상수를 규명하고, 동특성의 개선을 위하여 설계변수의 변경량을 물리좌 표계에서 얻는것을 목적으로 한다. 강체 마운트계의 관성제원 및 마운트강성 의 규명을 위하여 임으로 주어진 설계상수를 모델데이타로 하여 관성제원과 스프링 강성을 구하였다. 관성제원의 규명은 주어진 모델의 관성값을 모르는 것으로 하여 임의의 초기 관성값으로 감도해석에 의해 주어진 계의 관성값 을 물리 좌표계에서 규명하였다. 마운트 강성의 규명도 관성제원의 규명과 같은 방법으로 임의의 강성값으로 감도해석을 하여 강성값을 규명하였다. 또 한 감도해석에 의한 동특성 변경은 특정한 고유진동 수의 변경이 필요할 때, 고유진동수의 이동을 위한 관성제원의 변경 및 마운트 강성변경값을 예측할 수 있다. 본 연구수행의 기본적인 흐름도는 Fig.1.1과 같다. 위와 같은 작업 으로 엔진 마운트와 같은 강체 모델의 시스템 규명을 행하는 경우에 유한요 소해석 및 가진 실험으로 얻은 고유진동수의 정보 또는 원하는 고유진동수 의 특성을 기본으로 실제 설계에서 사용이 가능하도록 물리 좌표계에서 관 성 제원 및 스프링상수를 구할 수 있을 것이다.

• The Journal of the Korea Contents Association
• /
• v.21 no.9
• /
• pp.644-651
• /
• 2021

This study used a qualitative research method to derive meaning through intensive interviews on stress, focusing on the subjective perceptions and experiences of college students about COVID-19. The study participants were 12 college students enrolled at University Y in Gyeonggi-do, and the questionnaires were 'How has your daily life changed due to COVID-19?' and 'What changes have you made in your environment due to COVID-19?', 'What kind of comfort/inconvenience did you experience due to COVID-19?'As a result of analyzing the stress experienced by university students due to COVID-19, the stress factors were found to be four types: concerns about academic quality, anxiety about disconnection from social relationships, burden due to decrease in jobs (part-time jobs), and health and safety anxiety. The results of this study, it seems that the university's efforts to optimize online classes, seeking social relationships through non-face-to-face, preparing policies for job creation for college students, and health management measures due to COVID-19 should be discussed.

• Smart Media Journal
• /
• v.11 no.9
• /
• pp.75-80
• /
• 2022

Recently, research and development on immersive virtual reality(VR) technology to provide a realistic experience is being widely conducted. To provide realistic experience in immersive virtual reality for VR participants, virtual environments should consist of high-realistic environments using 3D reconstruction. In this paper, to acquire 3D information in real space using multiple cameras in the reconstruction process, we propose a novel method of optimal camera placement for accurate reconstruction to minimize distortion of 3D information. Through our approach in this paper, real 3D information can obtain with minimized errors during environment reconstruction, and it is possible to provide a more immersive experience with the created virtual environment.

• Economic and Environmental Geology
• /
• v.36 no.3
• /
• pp.191-200
• /
• 2003

Investigations on the contaminated lands due to heavy metals from mining activities or hydrocarbons from oil spillage for example, should be planned based on specific fitness-for-purpose criteria(FFP criteria). A FFP criterion is site specific or varies with situation, based on which not only the data quality but also the decision quality can be determined. The limiting factors on the qualities can be, for example, the total budget for the investigation, regulatory guidance or expert's subjective fitness-for-purpose criterion. This paper deals with planning of investigation methods that can satisfy each suggested FFP criterion based on economic factors and the data quality. To this aim, a probabilistic loss function was applied to derive the cost effective investigation method that balances the measurement uncertainty, which estimates the degree of the data quality, with the decision quality. In addition, investigation planning methods when the objectives of investigations do not lie in the classification of the land but simply in producing the estimation of the mean concentration of the contaminant at the site(e.g. for the use in risk assessment), were also suggested. Furthermore, the efficient allocation of resources between sampling and analysis was also devised. These methods were applied to the two contaminated sites in the UK to test the validity of each method.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.23 no.2
• /
• pp.53-60
• /
• 2015

Newly, nutrients recovery by bioconversion in the swine waste which caused serious problems due to its high organic fraction and content of nutrients such as phosphorus and nitrogen is viewed as a considerable approach since it produces valuable product as well as recycling of resources. Consequently, it is necessary to find new methods to treat swine waste. One possible solution to this problem is to use this potential pollutant as a growth substrate for economically valuable products. The study for the fundamental improvement of bioconversion efficiency by finding optimum growth conditions using statistical models and biotechnology was performed. A novel approach to utilize swine waste by cultivating mycelia of the mushroom Phellinus linteus are described. A central composite face-centered design (CCF) for the experiments was used to develop empirical model providing a quantitative interpretation of the relationships among the three variables, which were substrate concentration, pH, and temperature. The maximal radial extension rate (2.78mm/d) of P.linteus was determined under the condition of 5.0 g COD/L, pH 5.0, and temperature $29.7^{\circ}C$. The results of this study suggest that swine waste could be utilized as a growth substrate for the cultivation of mushroom mycelia enhancing an efficiency of utilizing this by-product of the livestock industry.

• Journal of Korea Water Resources Association
• /
• v.31 no.6
• /
• pp.685-694
• /
• 1998

Protection of groundwater resources from contamination has been of increasing concern throughout the past decades. In practice, however, groundwater monitoring is performed based on the experience and intuition of experts or on the convenience. In dealing with groundwater contamination, we need to know what contaminants have the potential to threat the water quality and the distribution and concentration of the plumes. Monitoring of the subsurface environment through remote geophysical techniques or direct sampling from wells can provide such information. Once known, the plume can be properly managed. Evaluation of existing methodologies for groundwater monitoring network design revealed that one should select an appropriate design method based on the purpose of the network and the availability of field information. Integer programming approach, one of the general purpose network design tools, and a cost to-go function evaluation approach for special purpose network design were tested for field applicability. For the sam contaminated aquifer, two approaches resulted in different well locations. The amount of information, however, was about the same.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.5
• /
• pp.35-43
• /
• 2013

Nowadays the widely used media in architecture include visualizations, animations and three-dimensional models. 3D digital methods using active CAM(Computer Aided Manufacturing) and CNC(Computerized Numerical Control) imaging have been developed for accurate shape and 3D measurements in freeform buildings. In contrast to a conventional building using auto CAD system and others, the proposed digital optimization method is based on a combination of 3D numerical data and parametric 3D model for design and construction. The objective of this paper is therefore to present digital optimization process for constructability of freeform building. The method can be useful in the effective implementation of an error-proofing process of freeform building during design and construction phase. 3D digital coordinate data can be used effectively to identify correct size of structural and finish members and installation location of each members in construction field. In addition, architects, engineers and contractors can evaluate design, materials, constructability and identify error-proofing opportunities. Other project participants can also include representatives from all levels of management, departments as well as workers and key subcontractors' personnel, if necessary. The 3D digital optimization process is therefore appropriate to serious variations in freeform shape. For future study, the developed digital optimization method is necessary to be carried out to verify the robustness and accuracy for constructability in construction field.

• Journal of Korean Society of Transportation
• /
• v.23 no.3 s.81
• /
• pp.35-47
• /
• 2005

This paper is to review a literature concerning Bus Transit Route Network Design(BTRNDP), to describe a future study direction for a systematic application for the BTRNDP. Since a bus transit uses a fixed route, schedule, stop, therefore an approach methodology is different from that of auto network design problem. An approach methodology for BTRNDP is classified by 8 categories: manual & guideline, market analysis, system analytic model. heuristic model. hybrid model. experienced-based model. simulation-based model. mathematical optimization model. In most previous BTRNDP, objective function is to minimize user and operator costs, and constraints on the total operator cost, fleet size and service frequency are common to several previous approach. Transit trip assignment mostly use multi-path trip assignment. Since the search for optimal solution from a large search space of BTRNDP made up by all possible solutions, the mixed combinatorial problem are usually NP-hard. Therefore, previous researches for the BTRNDP use a sequential design process, which is composed of several design steps as follows: the generation of a candidate route set, the route analysis and evaluation process, the selection process of a optimal route set Future study will focus on a development of detailed OD trip table based on bus stop, systematic transit route network evaluation model. updated transit trip assignment technique and advanced solution search algorithm for BTRNDP.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.11a
• /
• pp.830-833
• /
• 2020

콜센터에서 인력 스케줄링은 매우 중요하다. 모든 콜센터에서 인건비는 고정비 성격이 강하여 차지하는 비중이 매우 높아 콜센터의 이익을 좌지우지한다. 그렇기 때문에 콜센터의 적정 인력의 고용과 배치는 인건비 뿐만 아니라 콜 성공률 또한 직결되어 있어 콜센터 운영에서 중요한 사안이라고 할 수 있다. 대부분의 콜센터가 현재까지도 관리자의 경험에 의해 인력배치를 수립하는데, 이러한 방법은 과학적이지 않으며 인원수에 영향을 미치는 모든 변수들을 고려할 수 없다. 과거 수학적 모델을 수립하는 것이었다면, 지금은 모델을 학습시키고, 학습된 모델을 기반으로 미래의 고객과 인원수를 예측해야 한다. 본 논문에서는 수리제약식을 통해 다양한 변수들을 고려하고 비선형 정수 계획법과 딥러닝 기반의 예측 값을 이용하여 비선형 정수계획법을 통해 최적의 인력배치 스케줄링을 수립하였다.

• Journal of Korea Multimedia Society
• /
• v.11 no.5
• /
• pp.703-709
• /
• 2008

The methodology of the compiler construction improved by well-defined parsing techniques and developments of automatic generation tools. Through them, a variety of compilers for the special applications can be developed effectively: particularly, the compiler for embedded/mobile devices. Also, as contents industry is proliferating recently, the necessity of developing a compiler which is suitable for contents system is highly increasing. These various demands can be resolved by modular techniques and automatic construction of compilers. But, optimization of compiler itself as development tools uses heuristic methods and it needs higher cost. In this paper, we suggest the parsing method which can decrease unnecessary reduce actions by analyzing the characteristics of LR parser. The suggested parsing technique uses lookahead/ states, reachable reduction goals information in parsing process and enhances the parsing efficiency by changing continuous reduce actions to one. Actually, we applied it to the front-end of ANSI C compiler and proved the parsing performance in terms of the number of reduce actions.