• Journal of Aquaculture
• /
• v.16 no.3
• /
• pp.190-195
• /
• 2003

Dietary optimum ratio of frozen raw fish and commercial compound meal (CCM) in moist pellet (MP) were investigated to improve the growth rate, and feed and economical efficiency in the flounder, Paralichthys olivaceus. Experimental fish (average body weight, about 48 g) were divided into 6 groups and each group was fed with raw fish (FRF), and MPs (ratio of raw fish and CCM=9:1, 8:2, 7:3, 6:4 and 5:5) for 10 weeks. The 9:1, 8:2, 7:3, 6:4, 5:5 groups showed no significant difference in weight gain as 203.5~217.3%, while the FRF group showed significantly low growth rate as 183.1%(P<0.05). The feed efficiency gradually increased with the increase in the ratio of CCM and was the highest in the 5:5 group as 89.7%. As a result of analysis of body composition after the experiment, moisture was significantly low in the 7:3 group (P<0.05) and crude protein was significantly low in the 9:1 group (P<0.05). The crude lipid increased as the ratio of raw fish increased, and it was the highest in the raw fish group (8.3%) and the lowest in the 5:5 group (4.6%). There were no significant difference in hepatosomatic index (HSI) and condition factor(CF) among the experimental groups. Visceralsomatic index (VSI) increased with the increase in the ratio of raw fish and was significantly high in the raw fish group as 5.49 (P<0.05). For the unit cost of feed, it was found that raw fish was economical when mackerel, a source of raw feed, was 400 won/kg, while the ratio of 5:5 was economical when it was more than 500 won/kg. Results of this study concluded that sole use of raw feed is not desirable in view of growth, environment and economy, and the 5:5 group showed highest effect under the least use of raw feed.

• Korean Journal of Poultry Science
• /
• v.47 no.1
• /
• pp.21-27
• /
• 2020

This study intended to investigate the effects of slaked lime and ethanol on poultry red mites (PRM) in the coops of laying hen. Three experiments were conducted to this effect. The first used untreated hydrated lime as a control and 10% and 20% aqueous solutions of hydrated lime were used as treatments. The second experiment used 30%, 40%, 50%, 60%, 70%, 80%, 90%, and 100% ethanol solutions as treatments. The third experiment used hydrated lime in two distinct concentrations (10% and 20%) and 30%, 40%, and 50% ethanol solutions mixed to yield a total of 6 (2 × 3) treatments. All treatments were tested three times each. In the first experiment, the PRM killing rates were 74.0% and 92.3% when treated with 10% and 20% hydrated lime solutions, respectively. The acaricidal activity of the control sample was 0%. In the second experiment, the lowest value was 1.67% for the 30% ethanol solution, 8.33% for the 40% solution, and 7.47% for the 50% solution. The acaricidal activities of the 60% and 70% solutions were 42.4% and 84.7%, respectively. A 100% acaricidal activity was observed in dilutions above 80% (P<0.05). In the third experiment, the PRM killing effect of the hydrated lime + ethanol mixture was 100% in all treatments. In conclusion, after taking into consideration the economical and safety factors, a mixture of 10% hydrated lime solution and 30% ethanol is considered to be a suitable candidate for controlling PRM.

• Korean Journal of Plant Resources
• /
• v.10 no.4
• /
• pp.401-410
• /
• 1997

This experiment was conducted to investigate the opimum media, media amount and planting density of nutri-culture for the high quality and yield of wild vegetable, Liguliaria fischeri Turez. The fried rice hull was recognized best media among perlite, sand and fried rice hull for nutri-culture of Ligularia fischeri Turcz. The yield on fried rice hull media at early growing stage was lower, but higher than in other media at late growing stage. Therefore, total yield in fried rice hull media was 15-29% higher than that of the existing perlite media. Growth and yield of Ligularia fischeri Turcz. were not significantly different between medium amounts, therefore considering economical efficiency and stability, the optimum medium amount was 105 $\iota/m^3$, Yield by planting density increased in the high density and 50 plants/$m^2$ was considered as proper planting density in nutri-culture of Liguliaria fishcheri Turcz.

• Journal of Life Science
• /
• v.23 no.7
• /
• pp.854-862
• /
• 2013

The number of thoracic and lumbar vertebrae is known to be an unfixed trait among mammals. This study focused on the relationship between numerical variations of cervical (CER), thoracic (THO), and lumbar (LUM) vertebrae and the total number of vertebrae (TNV) and carcass traits in Jejunative black pigs (JBPs), Landrace pigs, and their intercrossed $F_2$ population. There were no numerical variations in CER vertebrae. On the other hand, the numbers of THO and LUM vertebrae and the TNV varied in all three populations. Of the traits investigated in the three populations, only the means${\pm}$SE of the LUM vertebrae did not show statistical significance (p>0.05). The carcass weights (CW), meat color (MC), marbling score (MS), backfat thickness (BFT), carcass length (CLE), THO vertebrae, and TNV all showed statistical significance (p<0.05). The JBP had 14-16 THO vertebrae, 5-6 LUM vertebrae, and 27-29 TNV. The Landrace pigs had 15-16 THO vertebrae, 5-7 LUM vertebrae, and 28-29 TNV. The $F_2$ population had 14-17 THO vertebrae, 5-7 LUM vertebrae, and 27-30 TNV. In the F2 population, increased numbers of THO vertebrae and TNV were associated with a significant increase in the CW, CLE, and BFT (p<0.05). In particular, the increase in the TNV was caused by an increase in the number of THO rather than LUM vertebrae. Although the animals with a greater number of THO and TNV had thicker backfat, they had a longer CLE and a heavier CW. Both these traits are economically more important than the level of backfat when determining the productivity level. These results suggest that genetic selection to increase the number of vertebrae, especially in Landrace pigs, JBPs, and their related populations, may be an excellent strategy for improving productivity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.2
• /
• pp.164-170
• /
• 1985

Yellowish modified wool, dithiocarbamate(DTC) wool, was synthesized by partial hydrolysis in 0.2 N-NaOH reacting with carbon disulfide to use as ${\alpha}-amylase$ immobilization matrix. ${\alpha}-amylase$ was immobilized reacting with sulfide group of DTC-wool by covalent binding within 1 hour. 0.5 gram of this preparation, $DTC-wool-{\alpha}-amylase$, contained 150 ug of enzyme protein and its specific activity was about 90% of the native one. General properties of $DTC-wool-{\alpha}-amylase$ were a little different from optimum temperature, optimum pH, heat stability, kinetic constants and activation energy. An apparent Michaelis constant and maximum velocity of $DTC-wool-{\alpha}-amylase$ were 5.56 mg/ml and 0.37 mg/ml. $min^{-1}$ respectively, while activation energy was 16.6 kcal/mole.

• Journal of Korean Society of Forest Science
• /
• v.88 no.3
• /
• pp.292-298
• /
• 1999

Huber value and leaf specific conductivity were investigated for determining the hydraulic conductance of six deciduous hardwood species subjected to five levels of artificial shade treatments. Huber values measured in full sun were in the ranges of $1.5{\sim}9.1mm^2/dm^2$, $1.3{\sim}2.6mm^2/dm^2$, $1.5{\sim}5.3mm^2/dm^2$ in June, July, and September, respectively in the first year. The values generally decreased with increasing the shading in most of the species studied. Because of early defoliation in September, most of the values measured were also higher in September than in July. Huber values were quite different between those of the first year and those of the second year in most of the species studied, but the seasonal variation of Huber values and shading effects to the values seemed to be similar between the first and the second years. The values of leaf specific conductivity(LSC) measured in Betula platyphylla var. japonica. B. schmidtii, Zelkova serrata, Acer mono for 2 years were in the range of $4.0{\sim}80.0{\mu}{\ell}/dm^2$ by season and by shading treatment. But in Ligustrum obtusifolium and Prunus sargentii, the values were in the ranges of $4.0{\sim}280.0{\mu}{\ell}/dm^2$ and $8.0{\sim}120{\mu}{\ell}/dm^2$, respectively with having quite different values compared with those of the above species. Seasonal variation of LSC values was more or less irregular by species and by treatment year, but the LSC values of B. platyphylla vac. japonica, B. schmidtii, and P. sargentii in the first year and also those of Z. serrata and P. sargentii in the second year were mostly higher in September than in July. The LSC values seemed to be generally decreased with increasing the artificial shading in all of the species studied.

• Journal of Forest and Environmental Science
• /
• v.8 no.1
• /
• pp.21-33
• /
• 1992

This study was performed to investigate the hardness of wood related to the wood surface, sap and heartwood, early and latewood, specific gravity, annual ring width and moisture content on major Korean tree species such as Pinus koraiensis, Abies holophylla, Larix leptolepis and Quercus valiabilis. The results were summarized as follows: 1. The arithmetic mean values of wood hardness on cross section were respectively $8.0kg/mm^2$ on Quercus valiabilis, $7.4kg/mm^2$ on Larix leptolepis, $5.1kg/mm^2$ on Pinus koraiensis and $4.7kg/mm^2$ on Abies hollophylla. 2. Generally hardness of wood on cross section was greater than the others and the proportion of cross section hardness to radial was respectively 2.8 on Quercus valiabilis, 2.6 on Larix leptolepis, 3.8 on Pinus koraiensis, and 4.1 on Abies holophylla and that proportion was tend to be decrease as specific gravity increased. 3. It was recognized that the hardness of sap and heartwood was different from each of the tree species and generally heartwood hardness was somewhat greater than sapwood. 4. Generally latewood hardness with in a ring was greater than earlywood and the proportion of earlywood hardness to latewood decreased as specific gravity increased. 5. The relations between hardness of wood and specific gravity show a high positive correlation on all sample tree species. 6. The values of hardness decreased with increasing annual ring width. 7. Hardness of wood on Abies holophylla was greatest in oven dried wood and it was decreased as moisture content increased, but not changed with moisture content abve F.S.P.. The proportion of oven dried wood hardness to green are respectively 3.0 on cross, 2.4 on radial and 1.9 on tangential section.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.4
• /
• pp.459-464
• /
• 2017

Biphenyl is used as an intermediate in the production of crop protection products, a solvent in pharmaceutical production, and as a component in the preservation of citrus fruits in many countries. Biphenyl is not authorized for use and also does not have standards or specifications as a food additive in Korea. National and imported food products are likely to contain biphenyl. Therefore, control and management of these products is required. In this study, a simple analytical method was developed and validated using HPLC to determine biphenyl in food. These methods are validated by assessing certain performance parameters: linearity, accuracy, precision, recovery, limit of detection (LOD), and limit of quantitation (LOQ). The calibration curve was obtained from 1.0 to $100.0{\mu}g/mL$ with satisfactory relative standard deviations (RSD) of 0.999 in the representative sample (orange). In the measurement of quality control (QC) samples, accuracy was in the range of 95.8~104.0% within normal values. The inter-day and inter-day precision values were less than 2.4% RSD in the measurement of QC samples. Recoveries of biphenyl from spiked orange samples ranged from 92.7 to 99.4% with RSD between 0.7 and 1.7% at levels of 10, 50, and $100{\mu}g/mL$. The LOD and LOQ were determined to be 0.04 and $0.13{\mu}g/mL$, respectively. These results show that the developed method is appropriate for biphenyl identification and can be used to examine the safety of citrus fruits and surface treatments containing biphenyl residues.

• Journal of Korean Society of Forest Science
• /
• v.89 no.2
• /
• pp.198-207
• /
• 2000

The diurnal and seasonal changes of water potential and stomatal diffusive resistance were investigated with the effects of shade treatment to elucidate the water relations of the one year old seedlings of Betula platyphylla var. japonica, Zelkova serrata, Acer mono, and Prunus sargentii subjected to five levels of artificial shade treatments from full sun to nearly full shading of 2-6% relative light transmittance. Stomatal diffusive resistance measured in the four deciduous hardwood species studied changed variously by growing season and by species with the five shade treatments in the ranges of 1.7~25.1s/cm in 9 a.m., 2.3~33.3s/cm in 1 p.m., and 1.1~36.8s/cm in 5 p.m.. The measurements of stomatal diffusive resistance increased with increasing the shading, and were higher in September than in June or July in most of the species studied. The stomatal diffusive resistance measured in Zelkova serrata, Acer mono, and Prunus sargentii seemed to be approximately 3~4 times higher in nearly full shading treatment than in full sun. Water potential also changed variously by growing season and by species with five different shade treatments in the ranges of -0.17~-1.20MPa in 9 a. m., -0.30~-2.03MPa in 1 p. m., and -0.18~-1.34MPa in 5 p.m., respectively. On the reverse of stomatal diffusive resistance, the measurements of water potential were lower in September than in June or July in most of the species studied, and the seasonal differences were especially greater in Zelkova serrata comparing with the other species. The water potential seemed to be higher of approximately 2~3 times in nearly full shading treatment than in full sun in all of the species studied, but the differences among the shading treatments were less in water potential than in stomatal diffusive resistance. The differences of water potential following the gradient of five shading treatment seemed to be less in Betula platyphylla var. japonica than in the other species. In Acer mono and Prunus sargentii being some shade tolerant species, the water potential increased rapidly through about noontime with raising the shading level from full sun to the intermediate shading level of 22-28% relative light transmittance, but slowly with closing to full shading. In Betula platyphylla var. japonica and Zelkova serrata being shade intolerant species, the water potential increased gradually throughout the shading levels and the increment ranges were greater in Zelkova serrata than in Betula platyphylla var. japonica.

• KDI Journal of Economic Policy
• /
• v.14 no.2
• /
• pp.55-75
• /
• 1992

At the outset of import liberalization, most economists expected a significant drop in the prices of domestic goods that faced foreign competition. However, it is now generally acknowledge that a significant drop in prices of those goods has not occurred. A common claim is that the prices did not drop significantly because the major importers of many imported goods were also the domestic producers of competing goods. The objective of this paper is to analyze the welfare effect of importation by domestic firms that produce competing goods, to identify the factors that facilitate such business practices, and to formulate a policy that could improve the welfare. We proved that importation by competing domestic firms definitely raises the prices of both imported and domestic goods compared to the situation where foreign goods are imported by non-producers, ceteris paribus. The intuition behind this result is that since a producer-importer is essentially a cartel, its overall profit maximization requires reduced competition between the products that it sells. On the other hand, if a producer-importer is more efficient at distrinbution than a simple importer, the comparison between the two cases is a priori indeterminate. We also find that the industries in which domestic producers are actively involved in importing competing goods are the ones in which the distribution channels are tightly controlled by importer-producers. This finding suggests that exclusive dealing contracts, which work as an entry barrier, may be the source of importing by domestic producers. We argue that in a country such as Korea, where financial market is highly incomplete, tight control of the distribution channels by oligopolistic manufacturers is likely to be an effective entry barrier that leads to importing by domestic producers of similar goods. We further argue that seemingly superior distribution costs of importer-producers is likely to be a result of market foreclosure which would disappear once the entry barrier of exclusive dealing contracts is removed. Above findings suggest that market imperfections are the source of importation by domestic competitors, which in turn constitutes a market imperfection in itself and reduces consumer welfare. As potential remedies, we considered three alternatives; direct price control by the government over the imported goods sold by major domestic producers, regulation of trade itself between major producers, and regulation of exclusive dealing contracts. For reasons both theoretical and pratical, we find that the last alternative is the most attrative. Prohibiting exclusive contracts between manufacturers and dealers in industries where exclusive dealing contracts are a significant entry barrier is expected to break up the importer-producer cartel and improve the welfare.