• Journal of the Korean Wood Science and Technology
• /
• v.32 no.5
• /
• pp.20-28
• /
• 2004

26 wooden relics excavated in Jedeok bay, Jinhae, Gyeongsangnam-do, Korea were identified. Wood species identified were consisted of 7 softwoods and 19 hardwoods. Softwoods identified were hard pines (Pinus spp.), while 19 hardwoods were consisted of 15 Lepidobalanus (Quercus spp.), 1 Cyclobalanopsis (Quercus spp.), 1 Meliosma oldhami Miq., 1 Platycarya strobilacea S. et Z., and 1 Carpinus spp., respectively. The wooden fences were composed of a variety of wood species such as hard pines (Pinus spp.), Lepidobalanus (Quercus spp.), Meliosma oldhami Miq. and Carpinus spp. Wooden members of ship were consisted of Lepidobalanus (Quercus spp.), and parts of ship body were hard pines(Pinus spp.). The other relics that uses were unknown were hard pines (Pinus spp.), Lepidobalanus (Quercus spp,), Cyclobalanopsis (Quercus spp.), and Platycarya strobilacea S. et Z.

• Textile Coloration and Finishing
• /
• v.34 no.4
• /
• pp.241-249
• /
• 2022

As for military backpacks in Korea, utility backpack products equipped with various functions along with comfort and convenience are being developed. As a result, the volume and weight of the backpack increase, and many lightweight studies of the materials forming the backpack are being conducted. This study is a basic study on frame lightweight using fiber-reinforced composites to deal with aluminum, a back frame that maintains the shape of a backpack and provides stability when worn by combatants. As is known, only fiber-reinforced composites have sufficient light weight and mechanical properties, but the mechanical properties were reviewed by drilling holes to maximize the light weight. Tensile strength and flexural strength were measured by drilling 6mm, 12mm, 18mm, and 24mm holes, and the tensile strength and flexural strength were measured when 1, 3, 5, and 7 holes of 12mm were increased. As a result, even when the number of holes was increased, tensile strength did not change significantly, and the flexural strength showed to be higher in the case of 3 holes and 5 holes than in the case of 1 hole.

• Journal of Adhesion and Interface
• /
• v.23 no.2
• /
• pp.17-24
• /
• 2022

Colloidal quantum dots (QDs) have gained attention for applications in quantum dot light emitting diodes (QLEDs) due to their high photoluminescence quantum yield, narrow emission spectra, and tunable bandgap. Nevertheless, non-radiative recombination induced by electron and hole imbalance deteriorates the device efficiency and stability. To overcome the problem, researchers have been trying to enhance hole transport properties of hole transporting layers (HTL) and/or slow down the electron injection in electron transport layer (ETL). Here, we summarize two approaches: i) development of interfacial materials between QD and ETL (or HTL); ii) engineering of HTL by blending or multi-layer approaches.

• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.4
• /
• pp.185-193
• /
• 2022

This paper proposes an adaptive sliding mode control with radial basis function neural network(RBFNN) scheme to enhance the performance of position and attitude tracking control of quadrotor UAV. The RBFNN is utilized on the approximation of nonlinear function in the UAV dynmic model and the weights of the RBFNN are adjusted online according to adaptive law from the Lyapunov stability analysis to ensure the state hitting the sliding surface and sliding along it. In order to compensate the network approximation error and eliminate the existing chattering problems, the sliding mode control term is adjusted by adaptive laws, which can enhance the robust performance of the system. The simulation results of the proposed control method confirm the effectiveness of the proposed controller which applied for a nonlinear quadrotor UAV is presented. Form the results, it's shown that the developed control system is achieved satisfactory control performance and robustness.

• Journal of Powder Materials
• /
• v.30 no.2
• /
• pp.107-115
• /
• 2023

Li_1.3Al_0.3Ti_1.7(PO₄)₃(LATP) is considered a promising material for all-solid-state lithium batteries owing to its high moisture stability, wide potential window (~6 V), and relatively high ion conductivity (10^-3-10^-4 S/cm). Solid electrolytes based on LATP are manufactured via sintering, using LATP powder as the starting material. The properties of the starting materials depend on the synthesis conditions, which affect the microstructure and ionic conductivity of the solid electrolytes. In this study, we synthesize the LATP powder using sol-gel and co-precipitation methods and characterize the physical properties of powder, such as size, shape, and crystallinity. In addition, we have prepared a disc-shaped LATP solid electrolyte using LATP powder as the starting material. In addition, X-ray diffraction, scanning electron microscopy, and electrochemical impedance spectroscopic measurements are conducted to analyze the grain size, microstructures, and ion conduction properties. These results indicate that the synthesis conditions of the powder are a crucial factor in creating microstructures and affecting the conduction properties of lithium ions in solid electrolytes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.343-343
• /
• 2022

강우의 유출은 하늘에서 발생한 강우가 다양한 유역을 거쳐 하천 및 해안 등으로 방류되는 일련의 과정을 의미한다. 강우의 유출과정에서 좀 더 효율적인 유량처리를 위하여 대부분의 도시 유역에는 우수관망이 설치되어 있다. 우수관망은 일정 빈도 이하의 강우량 방재를 목적으로 설계하며, 해당 강우량을 초과하는 경우 침수피해가 발생한다. 우수관망의 목표 강우를 초과하는 경우를 위하여 우수 저류지, 펌프장 및 LID(Low Impact Development) 시설물 설치 등 다양한 노력이 지속되어 왔으며, 이를 더욱 효율적으로 관리하기 위한 연구가 지속되고 있다. 본 연구에서는 강우 발생유역을 격자로 분할하여 우수의 흐름을 파악하여 효율적인 저류지 및 LID 시설물의 설치 위치를 지정하고자 한다. 분석지역은 경상남도 창원시 마산합포구 인근이며, ArcGIS 10.8을 이용하여 해당 지역의 지형을 3D로 구현하였으며 EPA-SWMM 5.1을 이용하여 침수분석을 진행하였다. 또한, 구성된 TIN(Triangulated Irregular Network)를 10m × 10m 크기의 격자로 분할하여 지표고에 따른 유량의 흐름 및 중첩을 판단하였다. 분할된 격자들 중 유량의 중첩 정도가 가장 높으며 침수피해 정도가 높은 지역을 대상으로 종류 및 크기를 고려한 최적의 비용과 효율을 갖는 저류지 및 LID 시설물 설치 위치를 결정하였다. 우수관망 시스템, LID 시설물, 우수 저류지 각각의 시선에서 접근한 기존의 연구와 달리 다양하고 포괄적인 방재시설물 설치를 통해 더욱 효율적이고 경제적인 우수 방재 시스템 구현에 도움이 될 것으로 기대된다. 우수관망 시스템, LID 시설물, 우수 저류지 각각의 시선에서 접근한 기존의 연구와 달리 다양하고 포괄적인 방재시설물 설치를 통해 더욱 효율적이고 경제적인 우수 방재 시스템 구현에 도움이 될 것으로 기대된다.

• International Area Studies Review
• /
• v.13 no.1
• /
• pp.371-389
• /
• 2009

Recently the ordinances of the Conciliation Committee of Distribution Disputes have been enacted and revised throughout the country. The purposes of the ordinances are to establish and operate the Conciliation Committee of Distribution Dispute. But several problems have been found in the ordinances of the Conciliation Committee of Distribution Disputes. These are the appointment of the chairman of the Conciliation Committee of Distribution Disputes, appointment of the acting chairman of the committee, consolidation of the requests of conciliation, challenge of the committee member. Also, the conciliator must keep in mind the several consideration when the Conciliation Committee of Distribution Disputes render the conciliation. These are the mutual survival between large distributer and small and medium distributer, care of consumer in the region, the growth and development of regional economy.

• Journal of Korea Water Resources Association
• /
• v.57 no.7
• /
• pp.451-460
• /
• 2024

It is necessary to apply a rational urban flood simulation method to analyze the causes of frequent urban flooding and to develop appropriate countermeasures. Previous studies in Korea have performed flood simulations by inputting the results of manhole overflow from sewer systems and river overflow into two-dimensional flood flow simulation models. It, however, is reasonable to simulate flooding from river and manhole overflows in a complex manner. In this study, we used the 1D-2D coupling functionality of the TUFLOW module, which is a part of XP-SWMM, to simulate the compound flooding of rivers and urban areas. That method was applied to the lower basin of the Naengcheon River in Pohang City, Gyeongsangbuk-do, where both inland flooding and river overflow coincided due to Typhoon Hinnamnor on September 5 and 6, 2022, to verify its applicability.

• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.690-694
• /
• 2010

A new soybean cultivar for soy-paste, 'Daeyang', was developed from the cross among 'Jangyeobkong', 'Hwaeomputkong' and 'Suwon192' by the soybean breeding team at the National Institute of Crop Science (NICS) in 2007. A promising line, SS97214-80-1, was selected and named this line 'Milyang163'. It was prominent and had good result from regional adaptation yield trials (RYT) for three years from 2005 to 2007 and released as the name of 'Daeyang'. It has a determinate growth habit, purple flower, grey pubescence, yellow seed coat, yellow hilum, large spherical seed (25.2 g per 100 seeds). 'Daeyang' is resistant to soybean mosaic virus and moderately resistant to bacterial pustule, the major soybean disease in Korea. The average yield of 'Daeyang' was 2.58 ton per hectare in the regional yield trials (RYT) carried out for three years from 2005 to 2007 which was 3 percent higher than the check variety, 'Taekwang'.

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.505-515
• /
• 2021

In this study, we evaluated the slope stability of the Pohang Daljeon-ri columnar joint (Natural Monuments # 415) and calculated the maximum energy, jumping height and moving distance of rockfalls using a simulation. Based on the results, we established the range of rockfall risk. The slopes of the Pohang Daljeon-ri columnar joint have dip directions of 93.79°, 131.99°, 165.54° and 259.84° from left (SW) to right (NE). Furthermore, they have a fan-like shape. The Pohang Daljeon-ri columnar joints are divided into four sections depending on the dip direction. The measurement results of the discontinuous face show that zone 1 is 125, zone 2 is 261, zone 3 is 262, zone 4 is 43. The results of slope stability analyses for each section using a stereographic projection method correspond to the range of planar and toppling failure. Although it is difficult to diagnose the type of failure, risk evaluation of currently falling rocks requires further focus. The maximum movement distance of a rockfall in the simulation was approximately 66 m and the rockfall risk range was the entire area under slope. In addition, it is difficult to forecast where a rock will fall as it rolls in various directions due to topographic factors. Thus, the installation of measures to prevent falling is suggested to secure the stability based on the results of the rockfall simulations and its probabilistic analysis.