• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.102-103
• /
• 2013

The use of inclinometer to measure deflections of structures is tested through experiments. By placing sensors at the ends of specimens, which are easy to accessed, the maximum deflection of a beam at the center is measured. Upon changing load, the inclined angles are measured and then converted to deflection using mathematical relationship between the deflection and rotational angle. Through this research, it is expected to promote the use of inclinometers for structural health monitoring of buildings and civil structures.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.526-526
• /
• 2016

고립파는 다른 파들과는 달리 파고만 주어지면 파형이 결정되고 변형 없이 장거리를 전파시켜 처오름높이를 가장 잘 재현할 수 있기 때문에 지진해일의 많은 연구에서 입사파로 사용되어 왔다. 본 연구에서는 한양대학교 수리학 및 해안공학 연구실에서 보유중인 서보-피스톤 타입 조파기로 고립파를 발생시켜 2차원 조파수조 내부에 설치되어있는 동해안 경사모형에서 각 수심 및 상대파고에 따른 고립파의 처오름높이 측정실험을 수행하였다. 다수의 파고계를 이용하여 각 구역에서 수심 및 상대파고에 따른 고립파의 파형을 측정하였고, 경사면에서 처오름높이 분포의 최대와 최소, 평균값을 측정하였다. 측정된 실험결과를 바탕으로 동해안에서의 고립파 처오름높이에 대해서 서술하였다.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.2
• /
• pp.115-125
• /
• 2019

The purpose of this study is to analyze the occurrence characteristics of vacant spaces in the old hillside residential area, focused on 7 areas surrounding old downtown in Busan. This study suggests 3 stages of analysis as following. First, after the overall site survey on the vacant spaces in 7 old hillside residential areas in Busan, this study identifies the difference of types of vacant spaces according to each area. Second, based upon precedent researches, this study set up 3 perspectives and 9 analysis indices to investigate the areal characteristics of vacant space occurrence. Third, through the GIS analysis on the vacant spaces, this study tries to analyze the physical, commercial and social/institutional conditions of the areas in order to disclose the areal characteristics of vacant spaces occurrence.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 1999.12a
• /
• pp.16-20
• /
• 1999

우리나라 특히 서ㆍ남해안은 전형적인 리아스식 해안으로 해안선 출입이 잦아 해안의 대표적인 지형들이 골고루 발달해 있는 곳이며, 해안생물자원도 풍부한 지역이다. 종래의 생태계 조사방법은 종목록을 작성하는 수준이었기 때문에 자연자원과 생태계 보존 및 관리에 필요한 해안생태계의 서식지 유형을 분류하여 지도화하는 작업이 우선적으로 이루어져야 한다. 이 연구는 태안해안국립공원 지역을 대상으로 다음의 세가지 연구를 시행하였다. 첫째, 해안생물의 서식 기반이 되는 물리적 요소인 기질, 경사도, 파랑에너지에 입각하여 서식지 유형을 분류하였다 둘째, 해안의 생태계 보존 및 관리에 영향을 미치는 토지이용 현황을 원격탐사를 이용하여 분류하였다. 셋째, 서식지와 토지이용을 결합하여 암석해안과 갯벌(모래, 펄)의 생태계 단위를 설정하였다. 이러한 생태계 단위는 생태적으로 관리전략을 세울 수 있는 토대가 될 수 있다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.284-285
• /
• 2012

레저선박 중 하나인 8톤급 낚시선박에 대한 설계에 앞서, 우수한 복원성을 가지기 위해서는 실해역에 가장 적합한 선형의 개발이 중요하다. 특히 선행되어야 할 것은 선박의 운동 중 횡요 운동이 선박의 안전성 및 승선감에 미치는 영향에 대한 평가라 할 수 있다. 본 논문에서는 모형선 시험 중 전통적으로 사용되는 경사시험, 자유 횡요 시험 및 GZ 곡선을 통하여 기존선형과 대상선형에 대한 횡요 감쇠효과 및 복원성 평가를 수행하였다. 그리고 선형개선에 따른 GM계산 및 횡요운동 주기와 복원성 조사를 통해 낚시선박의 안전성과 승객의 승선감에 대한 영향을 조사하였다. 특히 자유횡요시험 시, 비접촉식 6자유도 운동계측기(Rodym DMM)와 무선 경사계를 이용한 계측 두 가지 방법을 함께 수행함으로서 횡요감쇠효과에 대한 신뢰도를 높였고 그 결과 기존 선형보다 대상 선형에 의한 감쇠효과가 더 크게 나타남을 확인할 수 있었다. 따라서 개선된 대상선형의 GZ곡선을 이용하여 설계시 적합한 복원성을 조사하였으며 자유횡요시험을 통하여 횡요주기가 증가함으로서 대상선형의 승선감이 더욱 향상된 것으로 분석되었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.1-8
• /
• 2015

Wind power systems have gained much attention due to the relatively high reliability, good infrastructures and cost competitiveness to the fossil fuels. Advances have been made to increase the power efficiency of wind turbines while less attention has been focused on structural integrity assessment of structural sub-systems such as towers and foundations. Among many parameters for integrity assessment, the most perceptive parameter may be the induced horizontal displacement at the hub height although it is very difficult to measure particularly in large-scale and high-rise wind turbine structures. This study proposes an indirect displacement estimation scheme based on the combined use of inclinometers and accelerometers for more convenient and cost-effective measurements. To this end, (1) the formulation for data fusion of inclination and acceleration responses was presented and (2) the proposed method was numerically validated on an NREL 5 MW wind turbine model. The numerical analysis was carried out to investigate the performance of the propose method according to the number of sensors, the resolution and the available sampling rate of the inclinometers to be used.

• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.500-506
• /
• 1999

We designed and fabricated a bidirectional optical transceiver module for low cost access network. An integrated chip forming a pin-PD on an 1.3 urn FP-LD was assembled by flip-chip bonding on a Si optical bench, a single mode fiber with an angled end facet was aligned passively with the integrated chip on V-groove of Si-optical bench. Gaussian beam theory was applied to evaluate the coupling coefficients as a function of some parameters such as alignment distance, angle of fiber end facet, vertical alignment error. The theory is also used to search the bottle-neck between transmittance and receiving coupling efficiency in the bi-directional optical system. Tn this paper, we confirmed that reduction of coupling efficiency by the vertical alignment error between laser beam and fiber core axis can be compensated by controlling the fiber facet angle. In the fabrication of sub-module, a'||'&'||' we made such that the fiber facet have a corn shape with an angled facet only core part, the reflection of transmitted laser beam from the fiber facet could be minimized below -35 dE in alignment distance of 2: 30 /J.m. In the same condition, transmitted output power of -12.1 dEm and responsivity of 0.2. AIW were obtained.

• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.27-37
• /
• 2023

Assessing landcreep requires long-term monitoring, because cracks and steps develop over long periods. However, long-term monitoring using wire extensometers and inclinometers is inefficient in terms of cost and management. Therefore, this study selected an area with active landcreep and evaluated the feasibility of monitoring it using imagesing from terrestrial LiDAR and drones. The results were compared with minute-by-minute data measured in the field using a wire extensometer. The comparison identified subtle differences in the accuracy of the two sets of results, but monitoring using terrestrial LiDAR and drones did generate values similar to the wire extensometer. This demonstrates the potential of basic monitoring using terrestrial LiDAR and drones, although minute-byminute field measurements are required for analyzing and predicting landcreep. In the future, precise monitoring using images will be feasible after verifying image analysis at various levels and accumulating data considering climate and accuracy.

• Journal of Korea Water Resources Association
• /
• v.49 no.11
• /
• pp.941-949
• /
• 2016

The flow characteristics of the broad-crested side weir considering the levee's side slope of main channel ($ES_{ch}$) was investigated through hydraulic experiment in order to estimate the discharge coefficient equation. For applicability to actual river, levee's side slope of main channel 1:0.5, 1:1 and 1:2 were selected. Experimental results show that the new estimated equation for the discharge coefficient including $ES_{ch}$ is reasonable and effective in actual applications by comparing estimated and measured discharge over side weirs. Through a multiple linear regression analysis the importance of variabes were ordered as $ES_{ch}$ > $h/y_u$ > $L/y_u$ > $Fr_u$. Especially the discharge coefficient equation without $Fr_u$ was suggested, and the high applicability was reviewed by comparing the measured and calculated overflow of broad-chested side weir.

• Korean Journal of Materials Research
• /
• v.1 no.2
• /
• pp.105-112
• /
• 1991

In PLZT system, a new type of material for piezoelectric actuator was developed and its properties were investigated. This material consists of three layers : a piezoelectric ceramic layer, an interlayer which composition changes gradually, and another piezoelectric layer. This kind of materials is called functionally Gradient Materials(FGM). The composition of these layers were selected from the $(Pb,\;La)(Zr,\;TiO_3$ system through the concept of materials design. Sintered FGM at $1300^{\circ}C$, 2hr has an interlayer of about $20\mu\textrm{m}$ with no distorted damage. Dielectric and piezoelectic properties of FGM show intervalues of each side composition. The strain-voltage characteristics in FGM system was improved comparison with any single composition. Especially, the FGMs were fabricated which has high piezoelectric-low dielectric composition and low piezoelectric-high dielectric composition. The properties of both FGMs were significantly improved.