• Title/Summary/Keyword: 경도법

Search Result 657, Processing Time 0.023 seconds

A study on the formation and mechanical properties of the spray deposits by thermal spray (용사법에 의한 용사층의 형성과 기계적 성질에 관한 연구)

  • 최기영;박동환;김명호
    • Journal of Welding and Joining
    • /
    • v.7 no.3
    • /
    • pp.55-62
    • /
    • 1989
  • Variation of the spray droplet velocity with spraying distance and the microstructural characteristics of spray deposits fromed by oxy-fuel thermal spraying with Ni-base alloy powder contained chrome boride for hard facing were examined. Measurements of spray droplet velocity as a function of distance from the nozzle tip were inexcellent agreement with computer simulated predictions. Optimum condition for thermal spray deposits in this experiment was found to be under #10kg/cm^2$ of acceleration gas pressure with 15cm of spraying distance. Fine microstructure and higher microhardness of the initial part of the deposits due to rapid solidification were found to be able to maintained in a thickness up to 0.4mm, and this initial microstructure and properties could be maintained throughout the thickness of a thick spray deposits by performing the multipass spraying with 0.4mm thickness of each pass.

  • PDF

The Prevalence of Elevated Serum Liver Enzymes in Obese Children (인천 지역내 비만아에서 혈청 간효소치 상승의 유병률)

  • Oh, Yun Jung;Lee, Ji Eun;Son, Byong Kwan;Kim, Soon Ki
    • Pediatric Gastroenterology, Hepatology & Nutrition
    • /
    • v.9 no.2
    • /
    • pp.218-225
    • /
    • 2006
  • Purpose: With a remarkable increase in the prevalence of childhood obesity, the prevalence of nonalcoholic fatty liver disease is assumed to be increasing. The aim of this study is to evaluate the prevalence of nonalcoholic fatty liver disease, hyperlipidemia, and glucose intolerance in normal and obese children. Methods: A total of 2,206 elementary students (boys: 1340, girls: 866) were grouped according to obesity index; normal group and obesity group (mild, moderate, severe). Aspartate aminotransferase (AST, SGOT) and alanine aminotransferase (ALT, SGPT) were measured with total cholesterol, triglyceride, and fasting blood glucose. Results: Compared with the 4.6% of elevated aminotransferases in normal group, obese groups showed significantly higher prevalence; 12.1% in mild obesity group, 19.4% in moderate group, and 21.6% in severe group (p<0.0001). The prevalence of hypertriglyceremia was 16.9% in normal weight group, which was significantly lower than obesity group (mild obesity group 30.3%, moderate and severe 37.6%, 38.2% each). In boys, the prevalences of elevated aminotransferases in normal weight and obese groups (mild, moderate, severe) were 6.8%, 18.0%, 23.0%, and 26.0%, respectively (p<0.0001). In girls, those were 2.1%, 5.1%, 12.0%, and 12.6%, respectively (p< 0.0001). The prevalence of hypertriglyceremia was relative to severity of obesity in boys and girls (p<0.0001). Conclusion: The prevalence of elevated serum liver enzymes increased with severity of obesity. For the prevention and treatment of fatty liver and hypertriglycemia, it is important to lower the obesity degree and enforce the education for a weight loss in the student and the parents.

  • PDF

Evaluation of Material Properties of Concrete Harbour Facilities Using Nondestructive Testing Methods (비파괴시험에 의한 콘크리트 항만시설물의 주요 물성치 평가)

  • Yi, Jin-Hak;Han, Sang-Hun;Park, Woo-Sun
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.23 no.1
    • /
    • pp.1-10
    • /
    • 2011
  • Recently harbor remodeling projects are seriously considered to enhance the loading and unloading capability of old container terminals and to make decrepit ports as eco-friendly harbor and waterfront spaces in many countries. In such a case, quantitative and qualitative evaluations on concrete harbor facilities are mandatory to determine the current structural integrity condition of aged materials. Once the remodeling project is determined to be carried out, the reusability of individual structural members and facilities including caissons, cell-blocks, and tetra-pods need to be decided based on the simple and economic visual inspection and/or nondestructive testing. In this study, the systematic quantitative evaluation procedure for determining the structural integrity condition and the reusability is studied based the nondestructive testing and evaluation methods. Conventional methods including Schmidt hammer test and ultrasonicpulse velocity methods and elastic wave based methods including impact echo test and surface wave test are applied to the old harbor facilities in five different sites. The compressive tests are also carried out to determine the elastic modulus and compressive strength of concrete materials.

Estimation of Compressive Strength for Existing Concrete Structures by Non-Destructive Tests (비파괴시험에 의한 기존 콘크리트 구조물의 압축강도 추정)

  • 구봉근;오병환;김영의;김태봉;한승환
    • Magazine of the Korea Concrete Institute
    • /
    • v.6 no.6
    • /
    • pp.159-172
    • /
    • 1994
  • The relmund hammer test and ultrasonic pulse velocity test methods are commonly used to determine the in-situ compressive strength of concrete. One of the special feature of these methods is that they cannot give consistent and reliable results for variety of structures. In particular, very old existing structures have been generally received sreious environmental affectsand thus the strength prediction will be different from normal structures. The purpose of the present study is, therefore, to propose realistic equations to predict the in-situ strengths of actual old concrete structures. The rebound hammer and ultrasonic pulse velocity tests, carbonation depth measurments and core compressive strength measurements have been carried out for very old hydraulic and seacoast concrete structures spanning from one to about seventy years in age. From these test results, the strength-rebound number relations, the strength-pluse velocity relatinns and the strength-rebound number-pluse velocity relations have been obtained through multiple regression analysis. The present study indicates that the existing equations by nondestructive tests give quite different results from the present data. The proposed equations reasonably well predict the measured data for old concrete structures, especially for low strength concrete. The prediction equations proposed here can be efficiently used in determining the in-situ strength of old concrete structures.

Analysis on the TBM Penetration Rates in Extremely Hard Rocks (극경암에서의 전단면터널 굴착속도 분석연구)

  • Park, Chul-Whan;Synn, Joong-Ho;park, Chan;Kim, Min-Kyu;Chung, So-Keul;Kim, Hwa-Soo
    • Tunnel and Underground Space
    • /
    • v.10 no.4
    • /
    • pp.526-532
    • /
    • 2000
  • The uniaxial compressive strength of rock mass is known as the major factor in the assessment of drillability and the optimum excavation design in full-face tunnel excavation by TBM. Referring to worldwide cases, TBM has been applied mostly to the rock mass within the strength range of 80~250 MPa. Recently, a water way tunnel has been constructed as a part of Milyang dam project by TBM within the rock masses where the rock type is mainly granite with some granophyre, hornfels and andesite. Their uniaxial compressive strengths in extended area are estimated higher than 260 MPa. In this paper, the relation between the penetration rate and the rock mass properties is analyzed and TBM application to the very hard rocks is discussed. As a result that three suggestions to predict the TBM net penetration rate are analyzed, NTH method seems a better approach than other methods in the extremely hard rocks. NTH prediction matches with the results of actual values with the variations of 2~20%. Hardness measurement by Schmidt hammer and RMR estimation are carried out along the L = 5.3 km entire TBM tunnel alignment. The net penetration rate measured monthly is shown to be reciprocally proportional to Schmidt rebound hardness and RMR where coefficients of correlation, $R^2$are 0.705 and 0.777 respectively. As a result, they are good quantitative indices for the prediction of TBM net penetration rate in the extremely hard rocks. Magnitude of in-situ stress has a certain effect on TBM performance, and it is required to measure the in-situ stresses in TBM excavation design.

  • PDF

Orographic Precipitation Analysis with Regional Frequency Analysis and Multiple Linear Regression (지역빈도해석 및 다중회귀분석을 이용한 산악형 강수해석)

  • Yun, Hye-Seon;Um, Myoung-Jin;Cho, Won-Cheol;Heo, Jun-Haeng
    • Journal of Korea Water Resources Association
    • /
    • v.42 no.6
    • /
    • pp.465-480
    • /
    • 2009
  • In this study, single and multiple linear regression model were used to derive the relationship between precipitation and altitude, latitude and longitude in Jejudo. The single linear regression analysis was focused on whether orographic effect was existed in Jejudo by annual average precipitation, and the multiple linear regression analysis on whether orographic effect was applied to each duration and return period of quantile from regional frequency analysis by index flood method. As results of the regression analysis, it shows the relationship between altitude and precipitation strongly form a linear relationship as the length of duration and return period increase. The multiple linear regression precipitation estimates(which used altitude, latitude, and longitude information) were found to be more reasonable than estimates obtained using altitude only or altitude-latitude and altitude-longitude. Especially, as results of spatial distribution analysis by kriging method using GIS, it also provides realistic estimates for precipitation that the precipitation was occurred the southeast region as real climate of Jejudo. However, the accuracy of regression model was decrease which derived a short duration of precipitation or estimated high region precipitation even had long duration. Consequently the other factor caused orographic effect would be needed to estimate precipitation to improve accuracy.

Optimization of White Pan Bread Preparation via Addition of Purple Barley Flour and Olive Oil by Response Surface Methodology (자맥가루와 올리브유 첨가 식빵의 제조조건 최적화)

  • Kim, Jin Kon;Kim, Young-Ho;Oh, Jong Chul;Yu, Hyeon Hee
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.41 no.12
    • /
    • pp.1813-1822
    • /
    • 2012
  • The purpose of this study was to determine the optimal mixing conditions of two different amounts of purple barley flour ($X_1$), and olive oil ($X_2$) in baking white pan bread. The experiment was designed according to the central composite design of response surface methodology, which showed 10 experimental points including 2 replicates. The more purple barley flour added, the more weight, yellowness (b-value), hardness, gumminess, and chewiness increased; but the more volume, specific loaf volume, lightness (L-value), and springiness decreased. The greater the amount of olive oil added, the more hardness, cohesiveness, gumminess, and chewiness increased; but the more yellowness (b-value) and springiness decreased. The physical and mechanical properties were affected more by the amount of purple barley flour than by the amount of olive oil. Sensory properties except flavor were more affected by the amount of purple barley flour than by the amount of olive oil.

Selection of Optimal Culture Media for Developing Standard Ecological Toxicity Test Methods using Korean Freshwater Cladocera (표준생태독성시험법 개발을 위한 한국산 물벼룩의 최적 사육수 선발)

  • Kim, Byung-Seok;Park, Yoen-Ki;Park, Kyung-Hun;Kim, Jin-Kyung;Shin, Jin-Sup;Kim, Jin-Hwa;Yoon, Seong-Myeong;Ahn, Young-Joon
    • The Korean Journal of Pesticide Science
    • /
    • v.10 no.3
    • /
    • pp.189-195
    • /
    • 2006
  • The purpose of the current study was to develop a standard method to assess the ecological effect of pesticides using the representative Korean freshwater cladocerans. The indigenous cladocerans, Daphnia obtusa, Daphnia sp., Moina macrocopa, Simocephalus vetulus and Daphnia magna formally endorsed by the major international organizations were tested to select optimal culture media in laboratory condition. All of the Korean water flea tested showed good growth and fecundity in the moderately hard water ($CaCO_3$ ranged 80 to 100 mg $L^{-1}$) and soft water ($CaCO_3$ ranged 40 to 48 mg $L^{-1}$). However, considering that the total hardness of fresh water collected from 5 rivers ranged from 60.2 to 127.2 mg $L^{-1}$ ($CaCO_3$) and Ca deficiency could be a major determinant of species success and community structure among crustacean zooplankton, the present study suggests that the optimal water hardness for growing Daphnia sp., Daphnia obtusa, Moina macrocopa and Simocephalus vetulus is $80{\sim}100$ mg $L^{-1}$ of $CaCO_3$.

Friction Welding of Ni-Base ODS Alloy Prepared by Mechanical Alloying (기계적 합금법으로 제조된 Ni기 산화물 분산강화 합금의 마찰압접에 관한 연구)

  • 강지훈;박성계;김지순;권영순
    • Proceedings of the Korean Powder Metallurgy Institute Conference
    • /
    • 1994.10b
    • /
    • pp.15-15
    • /
    • 1994
  • M MA ODS 합금의 보다 폭넓용 실용확훌 위해 크게 요구되고 있는 적정 접합기술 개발의 한 방안£로, 마찰압접(Friction Welding) 방법의 가능성옳 조사하기 위하여 마찰압력과 시간, 마 찰 후 접촉압력(Upset Pressure) 풍을 다양하게 변화시켜 접합체톨 제조한 후, 접합체 강도에 대한 인장시험과 접합계연의 결합 및 미세구조에 대한 현미경 관찰, EDS에 의한 원소분석, 접 합이옴부의 경도분포와 파단면 분석 풍율 행하였다. 실험에 사용된 모재는 기계적 합금법으로 제조된 Inca사의 Ni기 MA 754 합금이었으며, 직경 l 10 mm, 길이 50 mm로 가공한 후, 아세통£로 초음파 세척하여 접합에 사용하였다. 접합온 브 레이크식 마찰압접기틀 사용하여 행하였으며, 회전시험편의 회전수는 2400 rpm이었A며, 다른 한쪽의 고정시험편과의 마찰압력 및 마찰시간온 각각 50 - 500 MPa과 1-5초로, 또한 업셋압 력도 50 - 600 MPa로 변화시켰다. 이때 업셋압력은 모든 시편에 대해 일정하게 6초동안 가하 였다. 얻어진 접합체는 각 압접조건 당 2개 이상의 접합시험편에 대해 상온 인장강도톨 측정하 였으며, 파단이 일어난 위치를 확인한 후 파면에 대한 분석율 주사전자현미경(SEM)과 에너지 분산형 분광분석기mDS)릎 사용하여 행하였다. 컵합이옴부의 첩합성올 확인하기 위하여, 접합 체를 접합변에 수직으로 절단, 연마한 후 광학현미경과 SEM, EDS 퉁으로 관찰, 분석하여 접 합부의 형상과 결합형성 여부, 접합계면의 미세조직 퉁옳 조사하였다. 또한 마찰압접에 따론 모재와 접합계연부의 경도분포훌 접합이옴부로부터 모재쪽으로 일정 간격율 두어 마이크로 비 커스 경도기로 측정, 조사하였다. 이상의 설험 결과, 다옴과 같온 결론옳 얻었다. ( (1) 접합체 강도가 모채 강도의 95% 이상이 되는 양호한 렵합체흩 얻기 위한 마찰압력 조건 온, 2400 rpm의 회전속도와 6초의 업셋압력 유지시간에서 마찰압력과 업셋압력, 그리고 마찰시 간이 각각 400 MPa 이상과 500 MPa 이상,2초입율 확인하였다. ( (2) 컵합이옴부의 관찰 결과, 모든 마찰압접 조건에서 컵합이옴부는, 기폰 모재의 texture 조직 을 유지하고 있는 모재부 영역(영역 ill)과 첩합계면부에 인접하여 업셋압력이 주어질 때 단조 효과에 의해 계연 외부로 metal flow가 일어나면서 형성된 영역 II, 매우 미세한 결정립으로 구성된 중앙부의 영역 1 로 이투어져 있옴융 확인하였다. ( (3) 최적접합조건이 충족되지 않온 경우, 접합부의 영역 I 에서 관찰된 void와 균열, 불균일한 접합계면 통의 접합결함에 Al과 Y. Ti 퉁£로 구성된 산화물률이 용집되어 있옴을 확인하였 다-( (4) 접합체의 파단 양상온 크게 접합부 파단과 모재부 파단, 이률의 혼합형 파단i로 나눌수 있었다. 모재부 파단의 경우, 파단면이 매끄럽고 파변상의 결정립도 매우 미세하였으며, 산확물 의 용집도 찾아보기 어려웠 나, 접합부 파단의 경우에는 파변의 굴곡이 비교척 심하고 연성 입계파괴의 형태를 보였£며, 결정립도 모채부 파단의 경우에 비해 조대하였다. 조대하였다.

  • PDF

Standardization of Estimation Function of Concrete Compressive Strength with Non-Destructive Test Using Andesite Aggregates (안산암골재를 사용한 콘크리트 구조물의 비파괴 압축강도 추정)

  • Chung, Lan;No, Yun-Ki;Park, Hyun-Soo;Roh, Young-Sook;Min, Kyung-Won
    • Journal of the Korea Concrete Institute
    • /
    • v.14 no.1
    • /
    • pp.1-7
    • /
    • 2002
  • The purpose of this research is to obtain a practical expression for the estimation of compressive strength of concrete using non-destructive testing method such as rebound Schmidt hammer and ultrasonic pulse